Final Acceptance When the Project/Service or any portion thereof, as designated by the COUNTY, is ready for its intended use, the COUNTY and any other invited parties shall make an inspection of the Project/Service, to verify its completeness and develop a punch list of items needing completion or correction before final payment will be made. CONTRACTOR shall have ten (10) calendar days to correct all deficiencies. An eighty-dollar ($80.00) re-inspection fee shall be applied for the third inspection and any required re-inspection thereafter. The COUNTY shall have the right to exclude CONTRACTOR from those portions of the work designated as complete after the inspection; provided, however, that CONTRACTOR will have reasonable access for the time allotted by the COUNTY to complete or correct items on the punch list. When the work provided for under this Agreement has been completely performed by CONTRACTOR, and the final inspection has been made by the COUNTY, a final invoice will be prepared by the CONTRACTOR. The amount of this invoice, less any sums that may have been deducted or retained under the provisions of this Agreement, will be paid to CONTRACTOR in accordance with this Agreement, and after CONTRACTOR has agreed in writing to accept the balance due, as determined by the COUNTY, as full settlement of the account under the contract and of all claims in connection therewith. Occupancy by the COUNTY alone does not constitute final acceptance.
Certification of Completion Certification of completion of the program will be contingent upon Resident successfully completing the core requirements of the Program, returning all property of the Medical Center such as books, equipment, etc., and having settled any other professional or financial obligations to the Medical Center. The certificate will be issued in accordance with the provisions of the ASHP Regulations on Accreditation of Pharmacy Residencies and signed by the RPD and the Chief Executive Officer of the organization. A certificate will not be issued to anyone who does not complete the program’s requirements. Core requirements to successfully complete the program include: • Possess a valid pharmacist license from the Pennsylvania State Board of Pharmacy by October 31st of the residency year. • Successful completion of core learning experiences and required longitudinal learning experiences as defined in the learning experience descriptions • Completion of all R1 goals/objectives with a status of achieved by the end of the residency. Completion of 100% of the remaining goals/objectives for the program with at least 50% of the objectives having a status as achieved. All objectives must have a minimum status of satisfactory progress. • All evaluations must be completed in accordance with ASHP Accreditation Standard as outlined in the Resident Agreement • Completion of pharmacokinetic certification by October 31 of residency year • Completion of inpatient anticoagulation certification by October 31 of residency year. • Completion of major project, which includes meeting all project deadlines and submission of written manuscript of completed project to the RAC. • Assigned projects (MUE, drug review, class review, and management project) have been completed • Presentation of at least one major CME program. • Completion of minimum staffing requirements as described in section 2.7 • Adherence to the organization’s attendance standards and as described in this document under Exhibit A.
Inspection and Final Acceptance District may, at its discretion, inspect and accept or reject any of Consultant’s work under this Agreement, either during performance or when within sixty (60) days after submitted to District. If District does not reject work by a timely written explanation, Consultant’s work shall be deemed to have been accepted. District’s acceptance shall be conclusive as to such work except with respect to latent defects, fraud and such gross mistakes as amount to fraud. Acceptance of any of Consultant’s work by District shall not constitute a waiver of any of the provisions of this Agreement including, but not limited to indemnification and insurance provisions.
Certification of Compliance The Owner may permit the use, prior to sampling and testing, of certain materials or assemblies when accompanied by manufacturer's certificates of compliance stating that such materials or assemblies fully comply with the requirements of the contract. The certificate shall be signed by the manufacturer. Each lot of such materials or assemblies delivered to the work must be accompanied by a certificate of compliance in which the lot is clearly identified. Materials or assemblies used on the basis of certificates of compliance may be sampled and tested at any time and if found not to be in conformity with contract requirements will be subject to rejection whether in place or not. The form and distribution of certificates of compliance shall be as approved by the Owner. When a material or assembly is specified by "brand name or equal" and the Contractor elects to furnish the specified "brand name", the Contractor shall be required to furnish the manufacturer's certificate of compliance for each lot of such material or assembly delivered to the work. Such certificate of compliance shall clearly identify each lot delivered and shall certify as to:
CERTIFICATION OF AGREEMENT In accordance with Division 4 of Part VIB of the Workplace Relations Act 1996, the Commission hereby certifies the attached written agreement in this matter. This agreement shall come into force from the date of certification, being 6 May 2003, shall operate in accordance with its terms and shall remain in force until 31 October 2005. Printed by authority of the Commonwealth Government Printer <Price code 40> GLADWYN PLUMBING PTY LTD & C E P U ENTERPRISE AGREEMENT 2002-2005 PLUMBING and MECHANICAL SERVICES ENTERPRISE AGREEMENT 2002 - 2005 Subject Matter Clause number Page number Annual Leave 27 17 Application of Site Agreements 20 13 Apprentices 16 10 Certification & Date of Operation 6 3 Commitments 3 2 Compensation of Tools of Trade 35 22 Consultative Mechanisms 8 3 Co-Invest 36 23 Dispute Settlement Procedure 12 5 Hours of Work 22 13 Industry Compliance Certificate 21 14 Industry Training 15 10 Inclement Weather 14 6 Insurances 29 18 Negotiation of a Subsequent Agreement 19 12 No extra claims 18 13 Occupational Health & Safety 13 5 Objectives 2 2 Parties & Persons Bound 4 2 Payment of Wages 26 15 Picnic Day 34 22 Plumbing Industry Calendar 32 22 Public Holidays 33 22 Protective Clothing 31 20 Relationship with Parent Award & VBIA 7 3 Right of Entry 11 4 Rostered Days Off 23 14 Scope & Application 5 3 Security of Employment 37 23 Shift Work 24 15 Shop Stewards 9 4 Superannuation 28 18 Termination of Employment & Redundancy 30 20 Title 1 2 Compensation for Tools of Trade 35 22 Union Representation 10 4 Wages & Allowances 25 17 Appendix A Wage Rates & Allowances Availability Appendix B Victorian Building Industry Site Agreement Appendix C Security of Employment Arrangements
Certification of Contractor The Contractor shall certify, over his own signature, that the Work provided for by the Contract Documents has been completed under the terms and conditions thereof, and that the entire balance of the contract is due and payable.
Certification of Applicants The Employer will determine the number of applicants to be certified to the hiring official for consideration. All employees on the internal layoff list for the classification, and all promotional, transfer and voluntary demotion candidates, who have the skills and abilities to perform the duties of the position will be certified and will be considered by the Employer, prior to consideration of other candidates.
361 Acceptance of Specified Roads Specified Road work may be accepted subject to completion of clearing work that does not affect the road structure when completion is delayed for reasons beyond control of Purchaser, such as adverse weather. Specified Road work may be accepted subject to completion of planting and seeding for soil stabilization when completion is delayed for reasons beyond control of Purchaser, such as seasonal limitations. Purchaser shall complete planting or seeding on such road during the next suitable planting season. Specified Road work may be conditionally accepted prior to the application of dust palliatives when application is not necessary to prevent dusting of the road surface due to climatic conditions. Purchaser shall apply dust palliative on such roads prior to use during periods when dusting may occur. Prior to request for final inspection, Specified Road work, roadways, borrow pits, and quarries, occupied and no longer needed by Purchaser in connection with Purchaser’s Operations, shall be cleared of all rubbish, excess materials, and temporary structures.
ISO 9001 Certification The Contractor shall maintain or exceed their ISO 9001 Certification and submit updates, if applicable
CERTIFICATION OF MEMBERS The undersigned hereby agree, acknowledge, and certify that the foregoing Operating Agreement is adopted and approved by each Member. The agreement consisting of pages, constitutes, together with Exhibit 1, Exhibit 2, and Exhibit 3, the Operating Agreement of , adopted by the Members as of the day of , 20 . Members: Signature Printed Name Percent: % Signature Printed Name Percent: % Signature Printed Name Percent: % Signature Printed Name Percent: % Signature Printed Name Percent: % EXHIBIT 1 LISTING OF MANAGERS By a majority vote of the Members, the following Managers were elected to operate the Company pursuant to ARTICLE IV of the Agreement: Signature Printed Name Chief Executive Manager Address Signature Printed Name Title: Address The above listed Manager(s) will serve in their capacities until they are removed for any reason by a majority vote of the Members as defined by ARTICLE IV or upon their voluntary resignation. Signed and agreed this day of , 20 . Signature of Member Printed Name Signature of Member Printed Name Signature of Member Printed Name Signature of Member Printed Name EXHIBIT 2 LISTING OF MEMBERS As of the day of , 20 the following is a list of Members of the Company: Name Percent % Address Name Percent % Address Name Percent % Address Name Percent % Address Authorized by Member(s) to provide Member Listing as of this day of , 20 . Signature of Member Signature of Member Signature of Member Signature of Member EXHIBIT 3 CAPITAL CONTRIBUTIONS Pursuant to ARTICLE II, the Members' initial contribution to the Company capital is stated to be $ . The description and each individual portion of this initial contribution is as follows: $ $ $ $ $ $ $ $ $ SIGNED AND AGREED this day of , 20 . Member Member Member Member LLC Resolution to Open a Bank Account Account: Holder: Bank Name: Address:
