Common use of Classification Definitions Clause in Contracts

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: Basic servicing maintenance surface plant and equipment; Care, maintenance and storage of all tools and equipment; Utilising of skills, tools and equipment in support of those workers in Group 3 and above; Application of general manual support skills; Powered Vibrating Road Roller up to 4 Tonne; Powered Road Roller up to 8 Tonne; Traffic Controller. Group 3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Steel Fixer Soil Tester Chainman (including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 AQF3 Classification Requirements certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 CW1 An entry entry-level employee with greater than three months month's experience. Group 2 CW2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment; equipment • Care, maintenance and storage of all tools and equipment; equipment • Utilising of skills, tools and equipment in support of those workers in Group Construction Workers Level 3 and above; above • Application of general manual support skills; skills • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller. Group 3 Controller • Bentonite Labourer CW3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Laying Steel Fixer Soil Tester Chainman (including incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 CW4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne Classification Requirements weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 5 CW5 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 AQF3 Classification Requirements certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 Bentonite Plant operator/leading Hand CW6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.Grab Operator Cutter Operator 7.2 Wages

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: Basic servicing maintenance surface plant and equipment; Care, maintenance and storage of all tools and equipment; Utilising of skills, tools and equipment in support of those workers in Group 3 and above; Application of general manual support skills; Powered Vibrating Road Roller up to 4 Tonne; Powered Road Roller up to 8 Tonne; Traffic Controller. Group 3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Steel Fixer Soil Tester Chainman (including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Classification Requirements Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 AQF3 Classification Requirements certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.Operator

Classification Definitions. ‌ Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment; • Care, maintenance and storage of all tools and equipment; • Utilising of skills, tools and equipment in support of those workers in Group 3 and above; • Application of general manual support skills; • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller. Group 3 * Rigging * Scaffolding * Dogging Concrete Finisher Pipe and Conduit Layer Steel Fixer Soil Tester Chainman (including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. • Form Setter • Cranes 20 to 40 Tonne • Grader up to 37kw (less than CAT 120) • Excavators up to .5 cubic metre capacity (up to 20 tonne weight) • Crawler Tractors up to 180kw (CAT D7 and below) • Scraper Loader up to 10 cubic metre capacity (less than CAT 621) • Loaders up to 130kw (up to CAT 950) • Backhoe • Trucks over 20 Tonne capacity • Compactors over 20 Tonne Classification Requirements Group 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 AQF3 Classification Requirements certificates) • Cranes 40 to 80 Tonne • Grader over 37kw (CAT 120 and above) • Excavator over .5 cubic metre capacity (above 20 tonne weight) • Crawler Tractor over 180kw (CAT D8 and above) • Scraper Loader over 10 cubic metre capacity (CAT 621 and above) • Loader over 130kw (CAT 960 and above) • Texture Curer Operator • Survey Instrument Hand (including unsupervised set out and GPS data manipulation) manipulation Group 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (* Where a person holds two of the three licenses listed below and is employed on the basis of their additional skill level and they are required to carry out multiple functions as appointed by licensed, then they shall be paid at the Employer) Group 8 Professional staff, including surveyors Level 4 rate of pay found in this Agreement. • Rigger - licensed pursuant to the Act and engineersor Regulations; • Dogger - licensed pursuant to the Act and or Regulations; or • Scaffolder - licensed pursuant to the Act and or Regulations.

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment; equipment • Care, maintenance and storage of all tools and equipment; equipment • Utilising of skills, tools and equipment in support of those workers in Group Construction Workers Level 3 and above; above Classification Requirements • Application of general manual support skills; skills • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller. Controller Group 3 2 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Laying Steel Fixer Soil Tester Chainman (including incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 5 4 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level AQF 3 AQF3 Classification Requirements certificates) qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.Operator

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment; equipment • Care, maintenance and storage of all tools and equipment; equipment • Utilising of skills, tools and equipment in support of those workers in Group Classification Requirements Construction Workers Level 3 and above; above • Application of general manual support skills; skills • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller. Controller Group 3 2 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Laying Steel Fixer Soil Tester Chainman (including incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Piling Labourer 1- Skilled labourer experienced in operating piling equipment, winches, piling leaders and shaft experienced. Group 4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Senior Piler- Skilled labourer with formal qualifications such as dogman, rigger certificate and capable of supervising minor projects Group 5 4 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level AQF 3 AQF3 Classification Requirements certificates) qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Classification Requirements Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.Operator

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 CW1 An entry entry-level employee with greater than three months month's experience. Group 2 CW2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment; equipment • Care, maintenance and storage of all tools and equipment; equipment • Utilising of skills, tools and equipment in support of those workers in Group Construction Workers Level 3 and above; above • Application of general manual support skills; skills • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller. Group 3 Controller CW3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Layer Laying Steel Fixer Soil Tester Chainman (including incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 CW4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Form Setter Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 5 CW5 All persons employed on the basis of their trade qualifications (Trade Certificate, or Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 AQF3 Classification Requirements certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Classification Requirements Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 6 CW6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.PAP