Client Furnished Materials. The Client is responsible for vendor qualification of Client furnished materials and for providing a certificate of compliance confirming the following: (i) That the materials are compliant with the provisions outlined in the “Note for Guidance on minimizing the risk of transmitting spongiform encephalopathy agents via human and veterinary medicinal products” (EMEA/410/01, Rev.2 or update); and (ii) A residual solvent certificate confirming that there is no potential for specific toxic solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class III to be present and the material, if tested, will comply with established EP / USP / ICH requirements. If any of the solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class III are used in the manufacture or are generated in the manufacturing process, solvents of concern will be indicated.

Client Furnished Materials. The Client is responsible for Vendor qualification of Client furnished materials and for providing a certificate of compliance confirming the following as applicable: (i) That the materials are compliant with the provisions outlined in the “Note for Guidance on minimizing the risk of transmitting spongiform encephalopathy agents via human and veterinary medicinal products” (EMA/410/01, most current revision or equivalent requirement). (ii) Certification there is no potential for specific toxic solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class III to be present and the material, if tested, will comply with established EP / USP / ICH requirements. If any of the solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class III are used in the manufacture or are generated in the manufacturing process, solvents of concern will be indicated. (iii) A cGMP compliance declaration for the API, assuring compliance with the latest regulatory requirements (e.g. EU directive 2004/27/EC for an API sourced from inside the EU or, ICH Q7 for an API sourced from outside the EU, for API see Appendix F); and (iv) Any other certification applicable to the furnished material (e. g. Residues of Metals Catalysts & Reagents, Genotoxic Impurities, Kosher, Melamine, Viral Inactivation, etc...).

Client Furnished Materials. The Client is responsible for vendor qualification of Client furnished materials and for providing a certificate of compliance confirming the following: (i.) That the materials are compliant with the provisions outlined in the “Note for Guidance on minimizing the risk of transmitting spongiform Quality Agreement QG01-05-T001-01 Page9of18 encephalopathy agents via human and veterinary medicinal products” (EMEA/410/01 , Rev.2 or update); and (ii.) A residual solvent certificate confirming that there is no potential for specific toxic solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class Ill to be present and the material, if tested, will comply with established IEP / USP / ICH requirements. If any of the solvents listed in the EP / USP / ICH residual solvents Class I, Class II or Class Ill are used in the manufacture or are generated in the manufacturing process, solvents of concern will be indicated.

Client Furnished Materials. The Client shall provide the Engineer with all criteria and full information as to the Client’s requirements for the Project, including design objectives and constraints, space, capacity, and performance requirements, flexibility, and expandability, and any budgetary limitations. The Client shall furnish copies of all Design and Construction Standards, which the Client will require to be included in the drawings and specifications. The Client shall furnish copies of Client standard forms, conditions, and related documents for the Engineer to include in the Bid Documents as appropriate. In addition, the Client shall provide the following specific materials and information for the performance of this Proposal:

Client Furnished Materials. Any device, property, equipment, materials or other tangible property furnished by Discovery for use on this Project shall remain the property of Discovery unless otherwise agreed in writing, and will be governed by a separate agreement. [ *** ]. Discovery will cooperate in providing any operation instructions to Battelle upon request and Battelle may reasonably rely on the information so provided. Battelle shall provide such information as Discovery may reasonable request in connection with Discovery’s efforts to secure casualty and other insurance covering any such device, property, equipment, materials or other tangible property furnished by Discovery to Battelle in connection with the Project.

Related to Client Furnished Materials

Stored Materials Upon prior written agreement between the Contractor and Region 4 ESC, payment may be made for materials not incorporated in the work but delivered and suitably stored at the site or some other location, for installation at a later date. An inventory of the stored materials must be provided to Region 4 ESC prior to payment. Such materials must be stored and protected in a secure location and be insured for their full value by the Contractor against loss and damage. Contractor agrees to provide proof of coverage and additionally insured upon request. Additionally, if stored offsite, the materials must also be clearly identified as property of Region 4 ESC and be separated from other materials. Region 4 ESC must be allowed reasonable opportunity to inspect and take inventory of stored materials, on or offsite, as necessary. Until final acceptance by Region 4 ESC, it shall be the Contractor's responsibility to protect all materials and equipment. Contractor warrants and guarantees that title for all work, materials and equipment shall pass to Region 4 ESC upon final acceptance.
Time and Materials If this contract is designated as a Time and Materials contract, invoicing and payment shall be as follows: (a) Consultant shall submit invoices, not more often than once a month during the term of this agreement, based on the cost for work performed in accordance with the Rate Schedule in the Scope of Work and authorized reimbursable expenses incurred prior to the invoice date. Invoices shall contain the following information: (i) Serial identifications of bills, i.e., Xxxx No. 1; (ii) The beginning and ending dates of the billing period; (iii) A summary containing the total contract amount, the amount of prior xxxxxxxx, the total due this period, percentage of work completed, the remaining balance available for all remaining billing periods, and a brief description of work completed during the billing period. (b) City shall make monthly payments, based on such invoices, for satisfactory progress in completion of the Scope of Work, and for authorized reimbursable expenses incurred.
Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").
Training Materials Training Materials will be provided for each student. Training Materials may be used only for either (i) the individual student’s reference during Boeing provided training and for review thereafter or (ii) Customer’s provision of training to individuals directly employed by the Customer.
Customer Materials Subject to Section 4(a), all right, title and interest (including all Intellectual Property Rights) in and to the Customer Materials are owned by Customer or Customer’s suppliers.
Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:
PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.
Third Party Materials The Application may display, include, or make available third-party content (including data, information, applications, and other products, services, and/or materials) or provide links to third-party websites or services, including through third- party advertising ("Third-Party Materials"). You acknowledge and agree that Company is not responsible for Third-Party Materials, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality, or any other aspect thereof. Company does not assume and will not have any liability or responsibility to you or any other person or entity for any Third-Party Materials. Third-Party Materials and links thereto are provided solely as a convenience to you, and you access and use them entirely at your own risk and subject to such third parties' terms and conditions.
Personnel Equipment and Material Engineer shall furnish and maintain, at its own expense, quarters for the performance of all Engineering Services, and adequate and sufficient personnel and equipment to perform the Engineering Services as required. All employees of Engineer shall have such knowledge and experience as will enable them to perform the duties assigned to them. Any employee of Engineer who, in the reasonable opinion of County, is incompetent or whose conduct becomes detrimental to the Engineering Services shall immediately be removed from association with the Project when so instructed by County. Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the Engineering Services required under this Contract, or will obtain such personnel from sources other than County. Engineer may not change the Project Manager without prior written consent of County.
Procurement of Recovered Materials In the performance of this contract, the Contractor shall make maximum use of products containing recovered materials that are EPA-designated items unless the product cannot be acquired

Client Furnished Materials Sample Clauses

Filter & Search

Related Clauses

Parent Clauses

Related to Client Furnished Materials