COMPLETE STATOR REWIND Sample Clauses

COMPLETE STATOR REWIND. If a complete stator rewind is necessary, the following methods and procedures shall be used: a. All materials employed in the stator winding system shall be compatible and suitable for continuous operation at a Class F (155°C) hot spot temperature or higher. The combined system of insulating materials shall have been certified as suitable for Class F or higher. b. Winding insulation shall be oil resistant & non hygroscopic. c. Conductors shall be of high conductivity copper to SANS 804 of rectangular section having dimensions, tolerances and corners radiuses according to SANS 600317. d. Conductor insulation is to comply to modern systems of rewinding appropriate with IEC standards. Breakdown, bending and elongation tests on the covered conductor shall conform to the relevant IEC standards. e. If stator windings have to be burned out, it is recommended that the stator end-windings are cut-off prior to insulation burn out to facilitate better oven temperature control. The process shall be done in an oven with the following capabilities: - Time stamped trended recording of the oven burn-out process. The time-stamped record of the burn- out process shall be kept and provided to the Employer for record keeping. f. If burn out temperatures higher than the specified limits are used and the stator core losses after removing the old windings are 5% greater than the initial pre-stripping core loss, the Employer shall be contacted. All expenses for restoring the core losses to less than the 5% limit because of core loss degradation occurring during winding removal shall be the responsibility of the Repairer. g. If the winding has to be replaced with the same winding insulation system, the new coils shall have the same number of turns, same number of conductors, same turn and strand insulation, and same conductor cross-section area as the original coils. The thermal rating and thickness of the ground wall insulation shall be the same, or greater than that of the original winding. All proposed changes from the original winding system shall be discussed with the Employer prior to implementation. h. Where replacement coils and bars have a loose fit due to modern insulation types, it is preferred that copper sizes be appropriately increased first to improve the fit. Conductor size may be modified only with the approval of the Employer having evaluated the modification impact on motor performance parameters – provided by the Repairer’s suitably qualified and registered En...
AutoNDA by SimpleDocs

Related to COMPLETE STATOR REWIND

  • Complete Taking If at any time during the Fee Term title to or temporary use of the entire Project should become vested in a public or quasi-public authority by virtue of the exercise of a taking by condemnation, inverse condemnation or the right of eminent domain, or by voluntary transfer under threat of such taking, or in the event that title to a portion of the Project shall be taken rendering continued occupancy of the Project commercially infeasible in the judgment of the Sponsor, the Sponsor shall have the option to terminate this Fee Agreement as of the time of vesting of title by sending written notice to the County within a reasonable period of time following such vesting.

  • Grievance Mediation Nothing in this Article precludes the Parties from mutually agreeing to grievance mediation during any stage of the grievance procedure. The agreement shall be made in writing and stipulate the name of the person and the time line for grievance mediation to occur.

  • Investigation Period The first sentence of Section 4.1 of the Purchase Agreement is hereby deleted in its entirety and the following is hereby substituted in lieu thereof: “During the time period commencing upon the Effective Date of this Agreement, and terminating at 11:59 p.m. on October 18, 2012 (the “Investigation Period”), Buyer shall have the right to conduct and complete an investigation of all matters pertaining to the Property and Buyer’s purchase thereof including, without limitation, the matters described in this Section 4.1.”

  • Procurement Related Complaints and Administrative Review 49.1 The procedures for making a Procurement-related Complaint are as specified in the TDS. 49.2 A request for administrative review shall be made in the form provided under contract forms.

  • COMPLAINT AND GRIEVANCE PROCEDURE 9.01 Where a difference arises between the parties relating to the interpretation, application or administration of this Agreement, including any questions as to whether a matter is arbitrable, or where an allegation is made that this Agreement has been violated or whenever an employee who has completed the required probationary period and has been accepted by the Employer for employment in the permanent service, claims that he/she has been disciplined or discharged without reasonable cause, such difference, allegation or claim being hereinafter referred to as the grievance, the grievance procedure set forth below shall apply. 9.02 The Association shall name, appoint or otherwise select a Grievance Committee of no more than three (3) who shall be members of the Association and shall have reached at least the rank of First Class Fire Fighter and other advisors as deemed necessary at the expense of the Association. The Employer shall recognize and deal with the Grievance committee with respect to any matter or dispute which properly arises from a breach of the Collective Agreement from time to time during its term. This committee shall suffer no loss as a result of their attendance at such grievance meetings, hearings, etc. 9.03 No grievance will be considered where the circumstances giving rise to it occurred or originated more than ten (10) full working days before the submission of the grievance. Step 1 - An employee having a grievance will take the matter up through their Association representative. The President or designate shall contact Fire Management to seek a resolution. Step 2 - If the grievance is not settled within five (5) working days, the Association shall submit the matter in writing to the Fire Chief or designate within five (5) working days of receiving the reply from Step 1. The Fire Chief or designate shall render the written decision to the Association within five (5) working days after receiving the written grievance. In the context of this Article a working day shall be deemed to be Monday to Friday excluding designated holidays. Step 3 - If the reply of the Fire Chief is not acceptable to the Association the grievance may be referred to the Chief Administrative Officer (CAO) or the Director of Human Resources within five (5) working days of the written decision of the Fire Chief. The CAO or the Director of Human Resources, who together with the Fire Chief and any other advisors deemed necessary, shall meet with the Association Representatives within 5 working days to consider the grievance. Within five (5) working days of the aforesaid, the CAO or the Director of Human Resources will render a written reply to the employee and the Association. Step 4 - If no resolve is reached at Step 3, the matter shall be submitted to arbitration. Notice shall be given within 5 business days. The parties agree that, for the purposes of this collective agreement the words of the expedited arbitration provisions of the Labour Relations Act, 1995 as amended (Section 49), will be deemed to have been incorporated into this collective agreement. Accordingly and notwithstanding any other provisions of this article (the grievance/arbitration provisions); either party may refer a grievance to expedited arbitration in accordance with the provisions of Section 49. The parties further agree that neither party will raise any jurisdictional or other objection to the application of Section 49 to a grievance under this collective agreement as it pertains to the right to an expedited arbitration. Either party is entitled however, to raise any objection, with the arbitrator with respect to whether the provisions of Section 49 have been properly utilized in respect of any specific grievance (e.g. objections with respect to time limits etc.). Such an appointment by the Minister of Labour or his or her designate will be determined to be a joint appointment in accordance with Section 53(3) of the Fire Protection and Prevention Act. 9.04 Extensions to the time limits in 9.03 may not be unreasonably withheld. 9.05 The employee in all steps of the grievance procedure shall be confined to the grievance and redress sought as set forth in the written grievance initially filed as provided.

  • Individual Grievance Subject to clause 19.5 and as provided in section 208 of the PSLRA, an employee is entitled to present a grievance in the manner prescribed in clause 19.10 if the employee feels aggrieved (a) by the interpretation or application in respect of the employee, of (i) a provision of a statute or regulation, or a by-law, direction or other instrument made or issued by the Council, dealing with terms and conditions of employment; or (ii) a provision of a collective agreement or an arbitral award; or (b) as a result of any other occurrence or matter affecting the employee’s terms and conditions of employment.

  • Corrective Action Plan Within fifteen (15) Business Days following the establishment of the Joint Remediation Committee, the Purchasers, in consultation with the Sellers, shall prepare and submit to the Joint Remediation Committee an initial draft of the Corrective Action Plan. The parties shall work in good faith through the Joint Remediation Committee to finalize the Corrective Action Plan within fifteen (15) Business Days of the Purchasers’ submission of the initial draft of the Correct Action Plan. At the end of such period, if the Sellers reasonably determine that the Corrective Action Plan proposed by the Purchasers (as may be modified over the course of such period) would not reasonably be expected to satisfactorily address the Major Default, then the Sellers may escalate the issue to the Head of Commercial Capital (or equivalent leader of any successor business unit) of the Seller Group and the Chief Executive Officer of the Bank Assets Purchaser (the “Senior Executives”) and the Senior Executives shall work collaboratively (including with the Joint Remediation Committee) to develop a mutually agreeable Corrective Action Plan within fifteen (15) Business Days.

  • Proposed Corrective Action Plan Simultaneously with the submission of the Audit, the Recipient will submit to OCR for its review and approval a proposed Corrective Action Plan to address all inaccessible content and functionality identified during the Recipient’s Audit. The proposed Corrective Action Plan will set out a detailed schedule for: (1) addressing problems, taking into account identified priorities, with all corrective actions to be completed within 18 months of the date OCR approved the Corrective Action Plan; (2) setting up systems of accountability and verifying claims of accessibility by vendors or open sources; and setting up a system of testing and accountability to maintain the accessibility of all online content and functionality on an ongoing basis.

  • Grievance Investigation The Employer agrees to supply to the Union the names of all applicants for a vacancy, or new position in the course of a grievance investigation.

  • CENTRAL GRIEVANCE PROCESS The following process pertains exclusively to grievances on central matters that have been referred to the central process. In accordance with the School Boards Collective Bargaining Act central matters may also be grieved locally, in which case local grievance processes will apply.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!