Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments.
24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation.
24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation.
24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments.
24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation.
24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
Local Provisions (Local provisions related to these scheduling arrangements are to be set out in this Article and numbered in sequence.)
Special Provisions Check if Required ✔ If checked, the Supplemental State Terms and attached hereto as Exhibit “G” are hereby incorporated by reference into this DPA in their entirety. ✔ If checked, the Provider, has signed Exhibit “E” to the Standard Clauses, otherwise known as General Offer of Privacy Terms
SAFETY PROVISIONS It is the essence of this Order that all Services to be performed by Seller shall be done in a safe and good workmanlike manner, free of any accidents. Accordingly, Seller shall promulgate, maintain, and enforce appropriate safety and health rules and procedures (including training) with respect to its personnel and the Work to be performed hereunder, which rules and procedures at a minimum shall be the equivalent of or exceed applicable Buyer safety and health rules. All Services performed hereunder shall fully comply with all lawful governmental safety and health requirements, including the rules and standards established by the Occupational Safety and Health Act of 1970 ("OSHA"), as amended, and any other applicable federal, state and/or local safety or health laws, rules or regulations. Any equipment provided by Buyer to Seller for the benefit of Seller's employees or those of its subcontractors shall be at the sole risk and liability of Seller to make sure that such equipment is fit for the use intended and is in proper working order. XXXXXX AGREES TO INDEMNIFY (INCLUDING ATTORNEYS' FEES) DEFEND, AND TO SAVE HARMLESS BUYER FROM ANY AND ALL CLAIMS OF SELLER, SELLER’S SUBCONTRACTORS, AND THEIR EMPLOYEES ARISING OUT OF THE USE OF ANY EQUIPMENT FURNISHED BY BUYER OR ADVICE GIVEN BY BUYER RELATING TO SUCH EQUIPMENT, TO THE FULLEST EXTENT ALLOWED BY LAW, IT BEING UNDERSTOOD THAT BUYER SHALL NOT BE LIABLE UNDER LAW, CONTRACT, NEGLIGENCE, STRICT LIABILITY, OR OTHERWISE. Seller shall maintain a drug and alcohol-free workforce at all times while on Xxxxx's premises/location. Upon Xxxxx's request, Seller shall provide Buyer with a copy of all accident reports prepared by or submitted to Seller, including all OSHA illness and injury reports.
Supplemental Provisions All of the terms, conditions, representations, warranties, covenants and other provisions, if any, set forth in the supplemental provisions attached hereto as Schedule 2 (the “Supplemental Provisions”) are hereby incorporated into this Contract and shall be considered a part hereof. In the event of any conflict or inconsistency between the Supplemental Provisions and the other provisions of this Contract, the Supplemental Provisions shall control.
EFFECTIVE DATE AND TERMINATION OF THE CUSTODIAN AS FOREIGN CUSTODY MANAGER The Board's delegation to the Custodian as Foreign Custody Manager of the Portfolios shall be effective as of the date hereof and shall remain in effect until terminated at any time, without penalty, by written notice from the terminating party to the non-terminating party. Termination will become effective thirty (30) days after receipt by the non-terminating party of such notice. The provisions of Section 3.2.2 hereof shall govern the delegation to and termination of the Custodian as Foreign Custody Manager of the Portfolios with respect to designated countries.
Transitional Provision Schedule 3.2 contains a schedule of certain letters of credit issued for the account of the Borrower prior to the Closing Date. Subject to the satisfaction of the conditions contained in Sections 5.1 and 5.2, from and after the Closing Date such letters of credit shall be deemed to be Letters of Credit issued pursuant to this Article III.
Special Provisions for Affected Systems For the re-payment of amounts advanced to Affected System Operator for System Upgrade Facilities or System Deliverability Upgrades, the Developer and Affected System Operator shall enter into an agreement that provides for such re-payment, but only if responsibility for the cost of such System Upgrade Facilities or System Deliverability Upgrades is not to be allocated in accordance with Attachment S to the ISO OATT. The agreement shall specify the terms governing payments to be made by the Developer to the Affected System Operator as well as the re-payment by the Affected System Operator.
WITHDRAWAL PROVISIONS At or before the Income Date, the Owner may withdraw all or part of the amounts under this Contract by informing the Company at the Service Center. For full withdrawal, this Contract, or a completed Lost Contract Affidavit, must be returned to the Service Center. Premiums withdrawn from the Contract Value may be subject to a Withdrawal Charge and Recapture Charge as explained in more detail below. Premiums that are no longer subject to the Withdrawal Charge and Recapture Charge (and not previously withdrawn), plus earnings may be withdrawn free of Withdrawal Charges and Recapture Charges at any time. Upon full withdrawal, the Owner will receive the Withdrawal Value. The Withdrawal Value will be based on values at the end of the Business Day in which the request for withdrawal is received at the Service Center in Good Order. In no event shall the amount withdrawn, whether a full withdrawal or partial withdrawal, exceed the Withdrawal Value. Except in connection with a systematic withdrawal program, the minimum partial withdrawal amount is $500, or if less, the Owner's entire interest in the Investment Division or Fixed Account Option from which a withdrawal is requested. The Owner's interest in the Investment Division or Fixed Account Option from which the withdrawal is requested must be at least [$100] after the withdrawal is completed or the Owner's entire interest in the Investment Division or Fixed Account Option will be withdrawn. Unless otherwise specified, the withdrawal will be made from each Investment Division and each Fixed Account Option in proportion to their current value. Withdrawals will be based on values at the end of the Business Day on which the request for withdrawal is received in Good Order at the Service Center. The Company will waive the Withdrawal Charge and Recapture Charge on any withdrawal necessary to satisfy the minimum distribution requirements of the Internal Revenue Code. Any withdrawal in excess of the required minimum distribution will cause the entire amount to be subject to any applicable Withdrawal Charge and Recapture Charge. You may elect to take a systematic withdrawal by surrendering a specific sum or a certain percentage on a monthly, quarterly, semiannual or annual basis, subject to a $50 minimum withdrawal. Such withdrawals will be counted in determining the portion of the Contract Value taken as an Additional Free Withdrawal. Systematic withdrawals in excess of the Additional Free Withdrawal amount may be subject to a Withdrawal Charge and Recapture Charge.
General Provisions Regarding Accounts (a) So long as no Default or Event of Default shall have occurred and be continuing, all or a portion of the funds in the Trust Accounts shall be invested by the Indenture Trustee at the written direction of the Servicer in Permitted Investments as provided in Sections 4.1 and 4.7 of the Sale and Servicing Agreement. All income or other gain (net of losses and investment expenses) from investments of monies deposited in the Trust Accounts shall be withdrawn by the Indenture Trustee from such accounts and distributed (but only under the circumstances set forth in the Sale and Servicing Agreement) as provided in Sections 4.1 and 4.7 of the Sale and Servicing Agreement. The Servicer shall not direct the Indenture Trustee to make any investment of any funds or to sell any investment held in any of the Trust Accounts unless the security interest granted and perfected in such account will continue to be perfected in such investment or the proceeds of such sale, in either case without any further action by any Person, and, in connection with any direction to the Indenture Trustee to make any such investment or sale, if requested by the Indenture Trustee, the Issuer shall deliver to the Indenture Trustee an Opinion of Counsel, acceptable to the Indenture Trustee, to such effect.
(b) Subject to Section 6.1(c), the Indenture Trustee shall not in any way be held liable by reason of any insufficiency in any of the Trust Accounts resulting from any loss on any Permitted Investment included therein, except for losses attributable to the Indenture Trustee’s failure to make payments on such Permitted Investments issued by the Indenture Trustee, in its commercial capacity as principal obligor and not as trustee, in accordance with their terms.
(c) If (i) the Servicer shall have failed to give written investment directions for any funds on deposit in the Trust Accounts to the Indenture Trustee by 11:00 A.M. (New York City time) (or such other time as may be agreed upon by the Issuer and Indenture Trustee), on the Business Day preceding each Distribution Date, (ii) a Default or Event of Default shall have occurred and be continuing with respect to the Notes but the Notes shall not have been declared immediately due and payable pursuant to Section 5.2 or (iii) the Notes shall have been declared immediately due and payable following an Event of Default, amounts collected or receivable from the Trust Estate are being applied in accordance with Section 5.4 as if there had not been such a declaration, then the Indenture Trustee shall, to the fullest extent practicable, invest and reinvest funds in the Trust Accounts in one or more Permitted Investments.
