Differing Conditions Process Sample Clauses

Differing Conditions Process. A. If Contractor believes that any subsurface or physical condition including but not limited to utilities or other underground facilities that are uncovered or revealed at the Site either differs materially from that shown or indicated in the Contract Documents or is of an unusual nature, and differs materially from conditions ordinarily encountered and generally recognized as inherent in Work of the character provided for in the Contract Documents then Contractor shall, promptly after becoming aware thereof and before further disturbing the subsurface or physical conditions or performing any Work in connection therewith (except in an emergency), notify Owner and Engineer in writing about such condition. Contractor shall not further disturb such condition or perform any Work in connection therewith (except with respect to an emergency) until receipt of a written statement permitting Contractor to do so. B. After receipt of written notice, Engineer will promptly: 1. Review the subsurface or physical condition in question; 2. Determine necessity for Owner obtaining additional exploration or tests with respect to the condition; 3. Determine whether the condition falls within the differing site condition as stated herein; 4. Obtain any pertinent cost or schedule information from Contractor; 5. Prepare recommendations to Owner regarding the Contractor’s resumption of Work in connection with the subsurface or physical condition in question and the need for any change in the Drawings or Specifications; and 6. Advise Owner in writing of Engineer’s findings, conclusions, and recommendations. C. After receipt of Engineer’s written findings, conclusions, and recommendations, Owner shall issue a written statement to Contractor regarding the subsurface or physical condition in question, addressing the resumption of Work in connection with such condition, indicating whether any change in the Drawings or Specifications will be made, and adopting or rejecting Engineer’s written findings, conclusions, and recommendations, in whole or in part.
AutoNDA by SimpleDocs

Related to Differing Conditions Process

  • WORKING CONDITIONS All work shall be performed in conformity with applicable health and safety standards. Employees are encouraged to immediately report any unsafe working condition to their supervisor. No employee shall be disciplined for reporting any such conditions nor be required to work or to operate equipment when he/she has reasonable grounds to believe such action would result in immediate danger to life or safety the final determination of which shall rest with the Environmental Health & Safety Department.

  • TEACHING CONDITIONS The parties recognize that optimum school facilities for both student and teacher are desirable to insure the high quality of education that is the goal of both the Association and the Board. It is also acknowledged that the primary duty and responsibility of the teacher is to teach and that the organization of the school and school day should be directed toward ensuring that the energy of the teacher is primarily utilized to this end.

  • Qualifying Conditions In addition to any other compensation earned, any employee who is on the payroll of the Company on any of the foregoing recognized statutory holidays will be granted eight (8) hours' pay at the straight time rate of the employee's regular job, subject to compliance with all of the conditions (a) to (f) set forth below: (a) The employee must have been on the payroll for not less than the sixty (60) days just preceding the holiday and must have previously qualified for a statutory holiday as provided in (d) below, and (b) The employee must have worked at least one (1) day during the sixty (60)- day qualifying period just preceding the holiday, and (c) The employee must have worked their scheduled work day before, and their scheduled work day after, such holiday, unless failure to work their scheduled work day before or after the holiday was due to any of the following events: (i) When the employee is on their regular authorized paid vacation; (ii) When the employee is unable to work by reason of an industrial accident as recognized by the Workers' Compensation Board or non-occupational sickness or injury; (iii) When the operation in which the employee is engaged is curtailed or discontinued by the decision of the Company and which curtailment or discontinuance changes or eliminates the employee's scheduled work day before, or their scheduled work day after, such holiday; (iv) When a trade in shifts agreed upon between employees and approved in advance by the company results in a temporary change of the scheduled work day before, or the scheduled work day after, the holiday, provided the employee works the shift agreed upon; (v) When the employee is on a leave of absence authorized by the Company. (d) The employee who has been on the payroll for at least sixty (60) days but who has not previously qualified for a statutory holiday will qualify for the holiday if he has worked a minimum of one hundred eighty (180) hours during the sixty (60)- day qualifying period just preceding the holiday and meets the requirements of (b) and (c) above. (e) Time lost as the result of an accident as recognized by the Workers' Compensation Board, suffered during the course of employment, or time lost as a result of non-occupational sickness or injury shall be considered as time worked for the purpose of qualifying for a recognized paid holiday, it being understood that the employee will only be entitled to this credit for time while on Workers' Compensation or non-occupational sickness or injury for a period of up to but not exceeding one (1) year from the date of their sickness or injury. (f) It is understood and agreed, however, that an employee shall not receive the above provided holiday pay if they have agreed to work on such holiday and fails or refuses to work, except in the case where bona fide sickness, or other bona fide reason approved by the Company, prevents them working on such holiday.

  • Differing Site Conditions (a) The Contractor shall promptly, and before the conditions are disturbed, give a written notice to the Contracting Officer of (1) subsurface or latent physical conditions at the site which differ materially from those indicated in this contract, or (2) unknown physical conditions at the site(s), of an unusual nature, which differ materially from those ordinarily encountered and generally recognized as inhering in work of the character provided for in the contract. (b) The Contracting Officer shall investigate the site conditions promptly after receiving the notice. Work shall not proceed at the affected site, except at the Contractor’s risk, until the Contracting Officer has provided written instructions to the Contractor. If the conditions do materially so differ and cause an increase or decrease in the Contractor’s cost of, or the time required for, performing any part of the work under this contract, whether or not changed as a result of the conditions, the Contractor shall file a claim in writing to the PHA within ten days after receipt of such instructions and, in any event, before proceeding with the work. An equitable adjustment in the contract price, the delivery schedule, or both shall be made under this clause and the contract modified in writing accordingly. (c) No request by the Contractor for an equitable adjustment to the contract under this clause shall be allowed, unless the Contractor has given the written notice required; provided, that the time prescribed in (a) above for giving written notice may be extended by the Contracting Officer. (d) No request by the Contractor for an equitable adjustment to the contract for differing site conditions shall be allowed if made after final payment under this contract.

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

  • Existing Conditions Tenant accepts the Property in its condition as of the execution of the Lease, subject to all recorded matters, laws, ordinances, and governmental regulations and orders. Except as provided herein, Tenant acknowledges that neither Landlord nor any agent of Landlord has made any representation as to the condition of the Property or the suitability of the Property for Tenant's intended use. Tenant represents and warrants that Tenant has made its own inspection of and inquiry regarding the condition of the Property and is not relying on any representations of Landlord or any Broker with respect thereto. If Landlord or Landlord's Broker has provided a Property Information Sheet or other Disclosure Statement regarding the Property, a copy is attached as an exhibit to the Lease.

  • Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.

  • Site Conditions A. Existing Site Conditions: Information with respect to the site of the Work given in drawings or specifications has been obtained by County's representatives and is believed to be reasonably correct, but the County does not warrant either the completeness or accuracy of such information, and it is the responsibility of the Contractor to verify all such information.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!