Engineering Quality Sample Clauses

Engineering Quality. The project construction and acceptance shall be carried out as per the construction drawings, design change, specification, acceptance criteria, the relevant local regulations, and Party A’s requirements. All portions and subdivisions of the project shall meet the conformity standards. The completed project in its entirety shall meet the conformity standards.
AutoNDA by SimpleDocs
Engineering Quality. 1.4.1. Providing buses that meet the technical specifications set out in Schedule 2A and Schedule 2B and further upkeeping and maintaining buses to ensure their roadworthiness that meet the requirements of Stage Carriage Services. The preventive maintenance regime as prescribed by the Vehicle Manufacturer (VM) shall be carried out as per the schedule. The record of all preventive maintenance activities shall be kept in the Bus Maintenance Log Book (Log Book) and duly authenticated by the person in charge of the vehicle workshop carrying out bus maintenance. The Log books shall be produced for inspection by officials of GMCBL/ PM as and when demanded. 1.4.2. If PM considers that the operation of a vehicle provided by the Concessionaire could affect the safety of passengers or the general public, PM may instruct the Concessionaire not to operate that vehicle. In such circumstances the Concessionaire shall provide at its own expense an alternative vehicle for the performance of the Services. 1.4.3. The other provisions like disinfection of buses in once in two months as per Clause (92) of HMVR 1993 (as amended from time to time) shall also be complied with by the Concessionaire.
Engineering Quality 

Related to Engineering Quality

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. (a) A7 to show Purchaser’s performance responsibility. (b) The Schedule of Items to include costs of survey and design, as provided under B5.24, and adjust Timber Sale Account, as provided in B5.

  • Geotechnical Engineer « »« » « » « » « » « »

  • Upgrading Qualifications ‌ Where the Employer requires an employee to upgrade their skills or qualifications in order to operate or maintain new equipment, the cost of training and normal living and travel expenses as laid down in this agreement will be borne by the Employer.

  • Engineering Services Definition: Engineering Services includes any service or creative work, the adequate performance of which requires education, training and experience in the application of special knowledge in consulting, investigating, evaluating, planning and designing, engineering principles. Engineering Services covered by the Xxxxxx Architect-Engineers Act (40 U.S.C. 1102) are not covered in the primary scope of OASIS SB. Examples: Service areas that are included under the Engineering Services discipline include, but are not limited to the following: 1. Systems Engineering 2. Advanced Technology Pilots and Trials 3. Alternative Energy Sources and Engineering 4. Configuration Management 5. Concept Development

  • Air Quality To the extent applicable, Consultant must fully comply with all applicable laws, rules and regulations in furnishing or using equipment and/or providing services, including, but not limited to, emissions limits and permitting requirements imposed by the South Coast Air Quality Management District (SCAQMD) and/or California Air Resources Board (CARB). Although the SCAQMD and CARB limits and requirements are more broad, Consultant shall specifically be aware of their application to "portable equipment", which definition is considered by SCAQMD and CARB to include any item of equipment with a fuel-powered engine. Consultant shall indemnify City against any fines or penalties imposed by SCAQMD, CARB, or any other governmental or regulatory agency for violations of applicable laws, rules and/or regulations by Consultant, its subconsultants, or others for whom Consultant is responsible under its indemnity obligations provided for in this Agreement.

  • Value Engineering The Supplier may prepare, at its own cost, a value engineering proposal at any time during the performance of the contract. The value engineering proposal shall, at a minimum, include the following; a) the proposed change(s), and a description of the difference to the existing contract requirements; b) a full cost/benefit analysis of the proposed change(s) including a description and estimate of costs (including life cycle costs) the Procuring Entity may incur in implementing the value engineering proposal; and c) a description of any effect(s) of the change on performance/functionality.

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • Quality All products will be new and unused. All products provided by the Contractor must meet all federal, state, and local standards for quality and safety requirements. Products not meeting the requirements of this section will be deemed unacceptable and returned to the Contractor for credit at no charge to the State.

  • Engineer Resources The Engineer shall furnish and maintain quarters for the performance of all services, in addition to providing adequate and sufficient personnel and equipment to perform the services required under the contract. The Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the services required under this contract, or it will be able to obtain such personnel from sources other than the State.

  • Laboratory Testing All laboratories selected by UPS Freight for analyzing Controlled Substances Testing will be HHS certified.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!