Enhanced Extended Links (EELs) 5.3.1 EELs are combinations of Loops and Dedicated Transport as defined in this Attachment, together with any facilities, equipment, or functions necessary to combine those Network Elements. BellSouth shall provide CCI with EELs where the underlying Network Element are available and are required to be provided pursuant to this Agreement and in all instances where the requesting carrier meets the eligibility requirements, if applicable.
5.3.2 High-capacity EELs are (1) combinations of Loop and Dedicated Transport, (2) Dedicated Transport commingled with a wholesale loop, or (3) a loop commingled with wholesale transport at the DS1 and/or DS3 level as described in 47 C.F.R. § 51.318(b).
5.3.3 By placing an order for a high-capacity EEL, CCI thereby certifies that the service eligibility criteria set forth herein are met for access to a converted high-capacity EEL, a new high-capacity EEL, or part of a high-capacity commingled EEL as a UNE. BellSouth shall have the right to audit CCI’s high-capacity EELs as specified below.
Extended Local Calling Scope Arrangement An arrangement that provides a Customer a local calling scope (Extended Area Service, “EAS”), outside of the Customer’s basic exchange serving area.
Termination Prior to Maturity Date; Survival All covenants, representations and warranties made in this Agreement shall continue in full force until this Agreement has terminated pursuant to its terms and all Obligations have been satisfied. So long as Borrower has satisfied the Obligations (other than inchoate indemnity obligations, and any other obligations which, by their terms, are to survive the termination of this Agreement, and any Obligations under Bank Services Agreements that are cash collateralized in accordance with Section 4.1 of this Agreement), this Agreement may be terminated prior to the Revolving Line Maturity Date by Borrower, effective three (3) Business Days after written notice of termination is given to Bank. Those obligations that are expressly specified in this Agreement as surviving this Agreement’s termination shall continue to survive notwithstanding this Agreement’s termination.
Interim Extension Amendment a. Prior to or on the expiration date of this Contract, the Parties agree that this Contract can be extended as provided under this Section.
b. The System Agency will provide written notice of interim extension amendment to the Grantee under one of the following circumstances:
1. Continue provision of services in response to a disaster declared by the governor; or
2. To ensure that services to clients continue without interruption.
c. The System Agency will provide written notice of the interim extension amendment that specifies the reason and length of time for the extension.
d. Grantee will provide and invoice for services in the same manner as stated in the Contract.
e. An interim extension under Section (b)(1) above will extend the term of the contract not longer than 30 days after governor's disaster declaration is declared unless the Parties agree to a shorter period of time.
f. An interim extension under Section (b)(2) above will be a one-time extension for time determined by the System Agency.
Provisions Related to Extended Revolving Credit Commitments If the maturity date shall have occurred in respect of any tranche of Revolving Credit Commitments at a time when another tranche or tranches of Revolving Credit Commitments is or are in effect with a longer maturity date, then on the earliest occurring maturity date all then outstanding Swing Line Loans shall be repaid in full on such date (and there shall be no adjustment to the participations in such Swing Line Loans as a result of the occurrence of such maturity date); provided, however, that if on the occurrence of such earliest maturity date (after giving effect to any repayments of Revolving Credit Loans and any reallocation of Letter of Credit participations as contemplated in Section 2.03(l)), there shall exist sufficient unutilized Extended Revolving Credit Commitments so that the respective outstanding Swing Line Loans could be incurred pursuant the Extended Revolving Credit Commitments which will remain in effect after the occurrence of such maturity date, then there shall be an automatic adjustment on such date of the participations in such Swing Line Loans and the same shall be deemed to have been incurred solely pursuant to the relevant Extended Revolving Credit Commitments, and such Swing Line Loans shall not be so required to be repaid in full on such earliest maturity date.
Replacement of the L/C Issuer The L/C Issuer may be replaced at any time by written agreement between the Borrower, the Administrative Agent, the replaced L/C Issuer and the successor L/C Issuer. The Administrative Agent shall notify the Lenders of any such replacement of the L/C Issuer. At the time any such replacement shall become effective, the Borrower shall pay all unpaid fees accrued for the account of the replaced L/C Issuer pursuant to Section 2.03(m). From and after the effective date of any such replacement, (i) the successor L/C Issuer shall have all the rights and obligations of an L/C Issuer under this Agreement with respect to Letters of Credit to be issued by it thereafter and (ii) references herein to the term “L/C Issuer” shall be deemed to include such successor or any previous L/C Issuer, or such successor and all previous L/C Issuer, as the context shall require. After the replacement of the L/C Issuer hereunder, the replaced L/C Issuer shall remain a party hereto and shall continue to have all the rights and obligations of an L/C Issuer under this Agreement with respect to Letters of Credit issued by it prior to such replacement, but shall not be required to issue additional Letters of Credit.
Unbundled Loop Modifications (Line Conditioning 2.5.1 Line Conditioning is defined as routine network modification that BellSouth regularly undertakes to provide xDSL services to its own customers. This may include the removal of any device, from a copper Loop or copper Subloop that may diminish the capability of the Loop or Subloop to deliver high-speed switched wireline telecommunications capability, including xDSL service. Such devices include, load coils, excessive bridged taps, low pass filters, and range extenders. Excessive bridged taps are bridged taps that serves no network design purpose and that are beyond the limits set according to industry standards and/or the BellSouth’s TR 73600 Unbundled Local Loop Technical Specification.
2.5.2 BellSouth will remove load coils only on copper Loops and Subloops that are less than eighteen thousand (18,000) feet in length.
2.5.3 For any copper loop being ordered by NewPhone which has over six thousand (6,000) feet of combined bridged tap will be modified, upon request from NewPhone, so that the loop will have a maximum of six thousand (6,000) feet of bridged tap. This modification will be performed at no additional charge to NewPhone. Loop conditioning orders that require the removal of bridged tap that serves no network design purpose on a copper Loop that will result in a combined total of bridged tap between two thousand five hundred (2,500) and six thousand (6,000) feet will be performed at the rates set forth in Exhibit A.
2.5.4 NewPhone may request removal of any unnecessary and non-excessive bridged tap (bridged tap between zero (0) and two thousand five hundred (2,500) feet which serves no network design purpose), at rates pursuant to BellSouth’s SC Process as mutually agreed to by the Parties.
2.5.5 Rates for ULM are as set forth in Exhibit A.
2.5.6 BellSouth will not modify a Loop in such a way that it no longer meets the technical parameters of the original Loop type (e.g., voice grade, ADSL, etc.) being ordered.
2.5.7 If NewPhone requests ULM on a reserved facility for a new Loop order, BellSouth may perform a pair change and provision a different Loop facility in lieu of the reserved facility with ULM if feasible. The Loop provisioned will meet or exceed specifications of the requested Loop facility as modified. NewPhone will not be charged for ULM if a different Loop is provisioned. For Loops that require a DLR or its equivalent, BellSouth will provide LMU detail of the Loop provisioned.
2.5.8 NewPhone shall request Loop make up information pursuant to this Attachment prior to submitting a service inquiry and/or a LSR for the Loop type that NewPhone desires BellSouth to condition.
2.5.9 When requesting ULM for a Loop that BellSouth has previously provisioned for NewPhone, NewPhone will submit a SI to BellSouth. If a spare Loop facility that meets the Loop modification specifications requested by NewPhone is available at the location for which the ULM was requested, NewPhone will have the option to change the Loop facility to the qualifying spare facility rather than to provide ULM. In the event that BellSouth changes the Loop facility in lieu of providing ULM, NewPhone will not be charged for ULM but will only be charged the service order charges for submitting an order.
Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders.
5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment.
5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period).
5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period.
5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services.
5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply.
5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2.
5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement.
5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment
Increase of the Commitments (a) The Borrower may, from time to time, request by written notice to the Administrative Agent to increase the Commitments by a maximum aggregate amount for all such increases of up to $200,000,000, by designating one or more Lenders or other financial institutions (that will become Lenders), in each case, reasonably acceptable to the Administrative Agent and acceptable to the Swingline Lender and each LC Issuing Bank, in their respective sole discretion, that agree to accept all or a portion of such additional Commitments (each a “Designated Lender”).
(b) The Administrative Agent shall promptly notify the Designated Lenders of the Borrower’s request pursuant to subsection (a) above. Each Designated Lender shall notify the Administrative Agent by the date specified by the Administrative Agent (which date shall be a Business Day) that either (A) such Designated Lender declines to accept its additional Commitments or (B) such Designated Lender consents to accept the offered Commitments. Any Designated Lender not responding on or prior to the date specified by the Administrative Agent shall be deemed to have declined to accept the offered Commitments. The Administrative Agent shall, after receiving the notifications from all of the Designated Lenders or following the date specified in the notice to such Designated Lenders, whichever is earlier, notify the Borrower and the Lenders of the results thereof and the effective date of any additional Commitments. The effectiveness of such additional Commitments shall be subject to the condition precedent that the Borrower shall have delivered to the Administrative Agent (i) the resolutions of the Borrower authorizing such additional Commitments and all Governmental Approvals (if any) required in connection with such additional Commitments, certified as being in effect as of the effective date of such additional Commitments, (ii) a favorable opinion of counsel for the Borrower as to such matters as any Lender through the Administrative Agent may reasonably request and (iii) a certificate signed by a duly authorized officer of the Borrower, dated as of the effective date of such additional Commitments, stating that all conditions precedent to an Extension of Credit have been satisfied on and as of such effective date.
(c) Promptly following the effective date of any Commitment increase pursuant to this Section 2.07, (i) the Administrative Agent shall distribute an amended Schedule I to this Agreement (which shall thereafter be incorporated into this Agreement) to reflect any changes in Lenders, the Commitments and each Lender’s Commitment Percentage as of such effective date and (ii) the Borrower shall prepay the outstanding Revolving Borrowings (if any) in full, and shall simultaneously make new Revolving Borrowings hereunder in an amount equal to such prepayment, so that, after giving effect thereto, the Revolving Borrowings are held ratably by the Lenders in accordance with their respective Commitments (after giving effect to such Commitment increase). Prepayments made under this clause (c) shall not be subject to the notice requirements of Section 2.14.
(d) Notwithstanding any provision contained herein to the contrary, from and after the date of any Commitment increase and the making of any Loans on such date pursuant to clause (c)(ii) above, all calculations and payments of fees and of interest on the Loans shall take into account the actual Commitment of each Lender and the principal amount outstanding of each Loan made by such Lender during the relevant period of time.
Additional Conditions to Revolving Loans If a Revolving Loan is requested, all conditions set forth in Section 2.1 shall have been satisfied.
