FEDERATION OF EDUCATORS USE OF DISTRICT Sample Clauses

FEDERATION OF EDUCATORS USE OF DISTRICT. E-MAIL SYSTEM The Federation and its agents agree to read and abide by the terms specified in the District Technology Acceptable Use Policy. Any e-mail address of any District employee will not be sold or distributed to outside agencies. SECTION 1. ACTING INCUMBENT SUBSTITUTE TEACHING SERVICE Any teacher whose long-term substitute service is known to be 100 or more duty days in a continuous single assignment shall be classified as an Acting Incumbent Substitute Teacher. If it is not known whether a position will span 100 or more days, the teacher shall be paid at the long term substitute teacher rate until the 100th day at which time compensation will begin to be paid at the Acting Incumbent Substitute Teacher rate specified in Subd. 1 of this article. At the sole discretion of the District, Acting Incumbent Substitute Teacher status may begin earlier than 100 duty days for hard-to- fill positions. Subd. 1. Acting Incumbent Substitute Teacher service rate of pay shall be determined according to rules and procedures for placement of a regular contracted teacher on the salary schedule in Appendix A of this Agreement.
AutoNDA by SimpleDocs

Related to FEDERATION OF EDUCATORS USE OF DISTRICT

  • CFR PART 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, class, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Federal Government End Use Provisions We provide the Services, including related software and technology, for ultimate federal government end use solely in accordance with the following: Government technical data and software rights related to the Services include only those rights customarily provided to the public as defined in this Agreement. This customary commercial license is provided in accordance with FAR 12.211 (Technical Data) and FAR 12.212 (Software) and, for Department of Defense transactions, DFAR 252.227-7015 (Technical Data – Commercial Items) and DFAR 227.7202-3 (Rights in Commercial Computer Software or Computer Software Documentation). If a government agency has a need for rights not granted under these terms, it must negotiate with Us to determine if there are acceptable terms for granting those rights, and a mutually acceptable written addendum specifically granting those rights must be included in any applicable agreement.

  • 200 Domestic Preferences for Procurements As appropriate and to the extent consistent with law, the non-Federal entity should, to the greatest extent practicable under a Federal award, provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). The requirements of this section must be included in all subawards including all contracts and purchase orders for work or products under this award. For purposes of 2 CFR Part 200.322, “Produced in the United States” means, for iron and steel products, that all manufacturing processes, from the initial melting stag through the application of coatings, occurred in the United States. Moreover, for purposes of 2 CFR Part 200.322, “Manufactured products” means items and construction materials composed in whole or in part of non-ferrous metals such as aluminum, plastics and polymer-based products such as polyvinyl chloride pipe, aggregates such as concrete, glass, including optical fiber, and lumber. Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, Vendor certifies that to the greatest extent practicable Vendor will provide a preference for the purchase, acquisition, or use of goods, products, or materials produced in the United States (including but not limited to iron, aluminum, steel, cement, and other manufactured products). Does vendor agree? Yes

  • Disclosure Relating to Certain Federal Protections The parties acknowledge that they have been advised that: (a) in the case of Transactions in which one of the parties is a broker or dealer registered with the Securities and Exchange Commission (“SEC”) under Section 15 of the Securities Exchange Act of 1934 (“1934 Act”), the Securities Investor Protection Corporation has taken the position that the provisions of the Securities Investor Protection Act of 1970 (“SIPA”) do not protect the other party with respect to any Transaction hereunder; (b) in the case of Transactions in which one of the parties is a government securities broker or a government securities dealer registered with the SEC under Section 15C of the 1934 Act, SIPA will not provide protection to the other party with respect to any Transaction hereunder; and (c) in the case of Transactions in which one of the parties is a financial institution, funds held by the financial institution pursuant to a Transaction hereunder are not a deposit and therefore are not insured by the Federal Deposit Insurance Corporation or the National Credit Union Share Insurance Fund, as applicable.

  • Reports to Mortgagors and the Internal Revenue Service The Master Servicer shall, in each year beginning after the Cut-Off Date, make the reports of foreclosures and abandonments of any Mortgaged Property as required by Code Section 6050J. In order to facilitate this reporting process, the Master Servicer shall request that each Servicer, on or before January 15th of each year, shall provide to the Internal Revenue Service, with copies to the Master Servicer, reports relating to each instance occurring during the previous calendar year in which such Servicer (i) on behalf of the Trustee acquires an interest in a Mortgaged Property through foreclosure or other comparable conversion in full or partial satisfaction of a Mortgage Loan serviced by such Servicer, or (ii) knows or has reason to know that a Mortgaged Property has been abandoned. Reports from the Servicers shall be in form and substance sufficient to meet the reporting requirements imposed by Code Section 6050J. In addition, each Servicer shall provide the Master Servicer with sufficient information to allow the Master Servicer to, for each year ending after the Cut-Off Date, provide, or cause to be provided, to the Internal Revenue Service and the Mortgagors such information as is required under Code Sections 6050H (regarding payment of interest) and 6050P (regarding cancellation of indebtedness).

  • Performance of Government Functions Nothing contained in this contract shall be deemed or construed so as to in any way estop, limit, or impair the City from exercising or performing any regulatory, policing, legislative, governmental, or other powers or functions.

  • Sector Sub-Sector Industry Classification Level of Government Type of Obligation Description of Measure Source of Measure All sectors : : - : Central : National Treatment Senior Management and Board of Directors : National Treatment and the Senior Management and Board of Directors obligations shall not apply to any measure relating to small and medium sized domestic market enterprise2. Foreign equity is restricted to a maximum of 40% for domestic market enterprises with paid-in equity capital of less than the equivalent of USD 200,000 Note: Members of the Board of Directors or governing body of corporation or associations shall be allowed in proportion to their allowable participation or share in the capital of such enterprises. : -1987 Constitution of the Republic of the Philippines. - Foreign Investments Act of 1991 (R.A. No. 7042, as amended by R.A. No. 8179). -Presidential and Administrative Issuances. ∞ 2 The concept of a small and medium sized domestic market enterprise is an enterprise with paid in equity capital of less than the equivalent of USD 200,000.00.

  • CFR Part 200 or Federal Provision Xxxx Anti-Lobbying Amendment - Continued If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form - LLL", as instructed, to report the lobbying activities you performed or paid others to perform. Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of $100,000) Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). Does vendor certify compliance? Yes A non-Federal entity that is a state agency or agency of a political subdivision of a state and its contractors must comply with section 6002 of the Solid Waste Disposal Act, as amended by the Resource Conservation and Recovery Act. The requirements of Section 6002 include: (1) procuring only items designated in guidelines of the Environmental Protection Agency (EPA) at 40 CFR part 247 that contain the highest percentage of recovered materials practicable, consistent with maintaining a satisfactory level of competition, where the purchase price of the item exceeds $10,000 or the value of the quantity acquired during the preceding fiscal year exceeded $10,000; (2) procuring solid waste management services in a manner that maximizes energy and resource recovery; and establishing an affirmative procurement program for procurement of recovered materials identified in the EPA guidelines. Does vendor certify that it is in compliance with these provisions? Yes If the Federal award meets the definition of “funding agreement” under 37 CFR §401.2 (a) and the recipient or subrecipient wishes to enter into a contract with a small business firm or nonprofit organization regarding the substitution of parties, assignment or performance of experimental, developmental, or research work under that “funding agreement,” the recipient or subrecipient must comply with the requirements of 37 CFR Part 401, “Rights to Inventions Made by Nonprofit Organizations and Small Business Firms Under Government Grants, Contracts and Cooperative Agreements,” and any implementing regulations issued by the awarding agency. Pursuant to the above, when the foregoing applies to ESC Region 8 and TIPS Members, Vendor certifies that during the term of an award resulting from this procurement process, Vendor agrees to comply with all applicable requirements as referenced in the Federal rule above. Does vendor certify? Yes

  • Application of Section 409A Notwithstanding anything to the contrary herein, the following provisions apply to the extent severance benefits provided herein are subject to Section 409A of the Code and the regulations and other guidance thereunder and any state law of similar effect (collectively “Section 409A”). Severance benefits shall not commence until Executive has a “separation from service” for purposes of Section 409A. If Executive is a “specified employee” within the meaning of 409A(a)(2)(B)(i) of the Code, any installment payments of Disability Base Salary Payments pursuant to Section 6.3(b) or Cash Compensation Amounts pursuant to Section 6.5(b) or 6.6(b) that are triggered by a separation from service shall be accelerated to the minimum extent necessary so that (a) the lesser of (y) the total cash severance payment amount, or (z) six (6) months of such installment payments are paid no later than March 15 of the calendar year following such termination, and (b) all amounts paid pursuant to the foregoing clause (a) will constitute separate payments for purposes of Section 1.409A-2(b)(2) of the Treasury Regulations and thus will be payable pursuant to the “short-term deferral” rule set forth in Section 1.409A-1(b)(4) of the Treasury Regulations. It is intended that if Executive is a “specified employee” within the meaning of Section 409A(a)(2)(B)(i) of the Code at the time of such separation from service the foregoing provision shall result in compliance with the requirements of Section 409A(a)(2)(B)(i) of the Code because payments to Executive will either be payable pursuant to the “short-term deferral” rule set forth in Section 1.409A-1(b)(4) of the Treasury Regulations or will not be paid until at least 6 months after separation from service. The severance benefits are intended to qualify for an exemption from application of Section 409A or comply with its requirements to the extent necessary to avoid adverse personal tax consequences under Section 409A, and any ambiguities herein shall be interpreted accordingly.

  • CFR PART 200 AND FEDERAL CONTRACT PROVISIONS EXPLANATION TIPS and TIPS Members will sometimes seek to make purchases with federal funds. In accordance with 2 C.F.R. Part 200 of the Uniform Administrative Requirements, Cost Principles, and Audit Requirements for Federal Awards (sometimes referred to as “XXXXX”),Vendor's response to the following questions labeled "2 CFR Part 200 or Federal Provision" will indicate Vendor's willingness and ability to comply with certain requirements which may be applicable to TIPS purchases paid for with federal funds, if accepted by Vendor. Your responses to the following questions labeled "2 CFR Part 200 or Federal Provision" will dictate whether TIPS can list this awarded contract as viable to be considered for a federal fund purchase. Failure to certify all requirements labeled "2 CFR Part 200 or Federal Provision" will mean that your contract is listed as not viable for the receipt of federal funds. However, it will not prevent award. If you do enter into a TIPS Sale when you are accepting federal funds, the contract between you and the TIPS Member will likely require these same certifications.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!