MARKWEST’S COMMITMENTS Sample Clauses

MARKWEST’S COMMITMENTS. 3.1. MarkWest hereby commits and agrees to receive and purchase from MEA, at the Delivery Point all of the Plant Products produced from the Raw Make acquired by MEA under the Maytown Agreement, as adjusted for Incidental Losses or Gains, together with such other Plant Products to be purchased at the Siloam Facility from MEA. 4.1. The Plant Products sold under this Agreement shall be of the same quality as required under in Exhibit A, attached to the Fractionation Agreement.
AutoNDA by SimpleDocs
MARKWEST’S COMMITMENTS. 4.1 Subject to the terms of this Agreement, MarkWest shall receive all of Producer’s Gas delivered at the Receipt Point(s), gather that Gas to the Processing Plant, compress the Gas for processing, process the Gas for recovery of Plant Products (not including liquefied methane) and redeliver Producer’s Residue Gas at a pressure sufficient to enter the Redelivery Point(s). 4.2 MarkWest shall use diligent efforts to construct and install the Bluestone 3 Plant prior to [REDACTED]* and the Bluestone 4 Plant prior to [REDACTED]*. Except as expressly set forth herein, MarkWest or its Affiliates shall own all the appurtenances, additions, extensions, improvements, or expansions of or to the Facilities that are constructed by them, which additions shall become a part of the Facilities and shall be subject to this Agreement. 4.3 At such time that Producer desires to connect a well or xxxxx located within the Dedication Area (each such well, a “New Well”) to the Facilities, Producer will furnish MarkWest with information regarding the location of such New Well, the anticipated in-service date for such New Well and all available test results for such New Well. Except as expressly set forth herein, MarkWest shall install, own and operate extensions of the Gathering System as necessary to connect New Xxxxx in accordance with the following provisions: a. If the New Well is within the Gathering Boundary, then MarkWest will use commercially reasonable efforts to connect such New Well as soon as reasonably practicable. b. If the New Well is outside of the Gathering Boundary, then Producer may, at its option, (x) request that MarkWest install and operate the necessary connection, pipelines and related facilities to connect such well to the Facilities; or (y) install, own and operate, or engage a third party to install, own and operate, the necessary facilities to connect the well to the Facilities, and in either case to deliver the Gas from such well to MarkWest hereunder. If Producer requests that MarkWest install and operate the connection to the Facilities, and MarkWest determines that the connection of such well will be economic under the terms of this Agreement, then MarkWest will use commercially reasonable efforts to connect such well as soon as reasonably practicable. If MarkWest determines that the connection of that well will not be economic under the terms of this Agreement, MarkWest may either propose terms on which such connection would be economic or decline t...
MARKWEST’S COMMITMENTS. 2.1 Subject to the other provisions of this Agreement, including, without limitation, Section 2.4 below, MarkWest agrees to accept all of Producer’s Raw Make committed under Section 4 of this Agreement and delivered to the Receipt Point, exchange such Raw Make for Fractionated Products that shall be delivered for the account of Producer at the Delivery Point, and except as set forth above in Sections 5.B. and 5.C. of the body of this Agreement, market such Fractionated Products, in each case in accordance with this Agreement. The Fractionated Products delivered to Producer at the Delivery Point shall be based upon the composition and volume of the Raw Make delivered at the Receipt Point. 2.2 Fractionation Fuel shall be allocated on a pro rata basis based upon the gallons of Raw Make delivered (or deemed delivered) to the Fractionation Plant or any portion thereof. 2.3 MarkWest shall, at its sole cost, risk, and expense, operate and maintain, in a workmanlike manner and in accordance with industry standards, the Fractionation Plant and related facilities for loading Fractionated Products for shipment by highway, rail, and pipeline transportation from the vicinity of Fractionation Plant. 2.4 If capacity at the Fractionation Plant is curtailed or reduced, or is otherwise insufficient for the needs of all parties desiring to utilize the capacity at the Fractionation Plant, in each case due to Force Majeure or maintenance, then [REDACTED]*. 2.5 It is understood and agreed that either Party may, without liability to the other Party, interrupt the operations of its facilities for the purpose of making necessary alterations, maintenance or repairs thereto or to comply with applicable regulatory requirements. MarkWest shall schedule routine repair and maintenance so as to minimize disruption of service hereunder and, except in situations reasonably perceived by MarkWest to be emergencies, shall provide reasonable prior written notice to Producer of such scheduled routine repair and maintenance. In each case of such routine repair and scheduled maintenance, MarkWest shall coordinate with Producer in a commercially reasonable manner prior to giving the advance notice of any such service interruption. 3.1 As long as the composition of Producer’s Gas delivered to the Bluestone Processing Plant complies with the specifications set forth in the Bluestone Processing Agreement and does not contain contaminants or compounds that would otherwise cause the fractionated Raw Ma...
MARKWEST’S COMMITMENTS. MarkWest hereby commits and agrees to (a) receive and purchase from Liberty, at the Delivery Point, all of the Raw Make (and the Plant Products contained therein) delivered by Liberty at the Delivery Point, as adjusted for Incidental Losses or Gains, ** at Siloam to fractionate **, in which case MarkWest shall **, (b) subject to the foregoing clause (a), cause the Raw Make to be fractionated into Plant Products in accordance with this Agreement, and (c) use commercially reasonable efforts to market the Plant Products. MarkWest’s acceptance of Raw Make from Liberty is ** as of the date of this Agreement and **, and ** Raw Make.

Related to MARKWEST’S COMMITMENTS

  • STAFF COMMITMENT If this Settlement Agreement is accepted by the Hearing Panel, Staff will not initiate any proceeding under the By-laws of the MFDA against the Respondent in respect of the facts set out in Part IV and the contraventions described in Part V of this Settlement Agreement, subject to the provisions of Part IX below. Nothing in this Settlement Agreement precludes Staff from investigating or initiating proceedings in respect of any facts and contraventions that are not set out in Parts IV and V of this Settlement Agreement or in respect of conduct that occurred outside the specified date ranges of the facts and contraventions set out in Parts IV and V, whether known or unknown at the time of settlement. Furthermore, nothing in this Settlement Agreement shall relieve the Respondent from fulfilling any continuing regulatory obligations.

  • Revolving Commitments (a) Subject to the terms and conditions hereof, each Lender severally agrees to make revolving credit loans (“Revolving Loans”) to the Borrower from time to time on any Business Day during the Commitment Period, at such times as the Borrower may request in accordance with Section 2.2, in an aggregate principal amount at any one time outstanding which, when added to such Lender’s Applicable Percentage of the aggregate principal amount of Swingline Loans then outstanding, does not exceed the amount of such Lender’s Commitment; provided, however, that (i) no Revolving Loan shall be made to the extent the aggregate unpaid principal amount of all Loans would exceed the Total Commitments, (ii) no Borrowing Base A Loans shall be made to the extent that the aggregate unpaid principal amount of all Borrowing Base A Loans would exceed the aggregate Loan Value of the Pledged Eligible Assets (including the Pledged Eligible Assets referred to in Section 2.2(a)(ii) with respect to such Revolving Loan) and (iii) no Borrowing Base B Loans shall be made to the extent that the aggregate amount of all Borrowing Base B Loans would exceed the Borrowing Base B Limit; provided further that Borrowing Base B Loans may not be borrowed on any date in any rolling period of 90 consecutive days if Borrowing Base B Loans have already been outstanding for 30 days during such period. During the Commitment Period, the Borrower may borrow, prepay the Revolving Loans in whole or in part, and reborrow, all in accordance with the terms and conditions hereof. (b) The Borrower shall repay all outstanding Revolving Loans on the Termination Date. (c) The failure of any Lender to make any Revolving Loan required to be made by it shall not relieve any other Lender of its obligations hereunder; provided that the Commitments of the Lenders are several and no Lender shall be responsible for any other Lender’s failure to make Revolving Loans as required.

  • Increase in Revolving Commitments (a) The Borrower may, by written notice to the Administrative Agent from time to time, request that the total Revolving Commitment be increased by an aggregate amount not to exceed the Incremental Revolving Facility Amount at such time. Upon the receipt of such request by the Administrative Agent, the Administrative Agent shall deliver a copy thereof to each Revolving Lender. Such notice shall set forth the amount of the requested increase (which shall be in minimum increments of $500,000 and a minimum amount of $2,500,000 or equal to the remaining Incremental Revolving Facility Amount) and the date on which such increase is requested to become effective (which shall be not less than 10 Business Days nor more than 60 days after the date of such notice and which, in any event, must be prior to the Revolving Credit Maturity Date), and shall offer each Revolving Lender the opportunity to increase its Revolving Commitment by its Pro Rata Percentage of the proposed increased amount. Each Revolving Lender shall, by notice to the Borrower and the Administrative Agent given not more than 10 days after the date of the Administrative Agent’s notice, either agree to increase its Revolving Commitment by all or a portion of the offered amount (each Revolving Lender so agreeing being an “Increasing Revolving Lender”) or decline to increase its Revolving Commitment (and any Revolving Lender that does not deliver such a notice within such period of 10 days shall be deemed to have declined to increase its Revolving Commitment) (each Revolving Lender so declining or being deemed to have declined being a Non-Increasing Revolving Lender”). In the event that, on the 10th day after the Administrative Agent shall have delivered a notice pursuant to the second sentence of this paragraph, the Increasing Revolving Lenders shall have agreed pursuant to the preceding sentence to increase their Revolving Commitments by an aggregate amount less than the increase requested by the Borrower, such Borrower may arrange for one or more banks or other entities (any such bank or other entity being called an “Augmenting Revolving Lender”), which may include any Lender, to extend Revolving Commitments or increase their existing Revolving Commitments in an aggregate amount equal to the unsubscribed amount; provided, however, that each Augmenting Revolving Lender shall be subject to the prior written approval of the Administrative Agent, the Swingline Lender and the Issuing Bank (which approvals shall not be unreasonably withheld or delayed), and the Borrower and each Augmenting Revolving Lender shall execute all such documentation as the Administrative Agent shall reasonably specify to evidence its Revolving Commitment and/or its status as a Revolving Lender hereunder, Any such increase may be made in an amount that is less than the increase requested by the Borrower if such Borrower is unable to arrange for, or chooses not to arrange for, Augmenting Revolving Lenders. (b) Each of the parties hereto hereby agrees that the Administrative Agent may, in consultation with the Borrower, take any and all action as may be reasonably necessary to ensure that after giving effect to any increase pursuant to this Section 2.25, the outstanding Revolving Loans (if any) are held by the Revolving Lenders in accordance with their new Pro Rata Percentages. This may be accomplished at the discretion of the Administrative Agent, following consultation with the Borrower, (i) by requiring the outstanding Revolving Loans to be prepaid with the proceeds of a new Revolving Borrowing, (ii) by causing Non-Increasing Revolving Lenders to assign portions of their outstanding Revolving Loans to Increasing Revolving Lenders and/or Augmenting Revolving Lenders, or (iii) by any combination of the foregoing. Any prepayment or assignment described in this paragraph (b) shall be subject to Section 2.16, but shall otherwise be without premium or penalty. (c) Notwithstanding the foregoing, no increase in the Revolving Commitments shall become effective under this Section 2.25 unless (i) on the date of such effectiveness, the conditions set forth in paragraphs (b), (c) and (d) of Section 4.01 shall be satisfied (treating the effectiveness of the increase in the Revolving Commitments as a “Credit Event” for such purposes) and the Administrative Agent shall have received a certificate to that effect dated such date and executed by a Financial Officer of the Borrower, and (ii) if requested, the Administrative Agent shall have received legal opinions, board resolutions and other closing certificates reasonably requested by the Administrative Agent and consistent with those delivered on the Closing Date under Section 4.02.

  • Loan Commitments (i) Subject to the terms and conditions hereof, each Lender with an Initial Tranche A Term Loan Commitment severally agrees to make, on the Closing Date, one or more term loans (each, an “Initial Tranche A Term Loan”) to the Borrower in Dollars in an amount equal to such Lender’s Initial Tranche A Term Loan Commitment. The Borrower may make only one borrowing under the Initial Tranche A Term Loan Commitment which shall be on the Closing Date. Any amount borrowed under this Section 2.1(a)(i) and subsequently repaid or prepaid may not be reborrowed. Subject to Sections 2.11(a) and 2.12, all amounts owed hereunder with respect to the Initial Tranche A Term Loans shall be paid in full no later than the Maturity Date applicable to such Initial Tranche A Term Loans. Each Lender’s Initial Tranche A Term Loan Commitment shall terminate immediately and without further action on the Closing Date after giving effect to the funding of such Lender’s Initial Tranche A Term Loan Commitment on such date. (ii) Subject to the terms and conditions hereof, each Lender with an Initial Tranche B Term Loan Commitment severally agrees to make, on the Closing Date one or more term loans (each, an “Initial Tranche B Term Loan”) to the Borrower in Dollars in an amount equal to such Lender’s Initial Tranche B Term Loan Commitment. The Borrower may make only one borrowing under the Initial Tranche B Term Loan Commitment which shall be on the Closing Date. Any amount borrowed under this Section 2.1(a)(ii) and subsequently repaid or prepaid may not be reborrowed. Subject to Sections 2.11(a) and 2.12, all amounts owed hereunder with respect to the Initial Tranche B Term Loans shall be paid in full no later than the Maturity Date applicable to such Initial Tranche B Term Loans. Each Lender’s Initial Tranche B Term Loan Commitment shall terminate immediately and without further action on the Closing Date after giving effect to the funding of such Lender’s Initial Tranche B Term Loan Commitment on such date.

  • L/C Commitment (a) Subject to the terms and conditions hereof, the Issuing Lender, in reliance on the agreements of the other Lenders set forth in Section 3.4(a), agrees to issue letters of credit (“Letters of Credit”) for the account of the Borrower on any Business Day during the Revolving Commitment Period in such form as may be approved from time to time by the Issuing Lender; provided that the Issuing Lender shall have no obligation to issue any Letter of Credit if, after giving effect to such issuance, (i) the L/C Obligations would exceed the L/C Commitment or (ii) the aggregate amount of the Available Revolving Commitments would be less than zero. Each Letter of Credit shall (i) be denominated in Dollars and (ii) expire no later than the earlier of (x) the first anniversary of its date of issuance and (y) the date that is five (5) Business Days prior to the Revolving Termination Date, provided that any Letter of Credit with a one-year term may provide for the renewal thereof for additional one-year periods (which shall in no event extend beyond the date referred to in clause (y) above). (b) The Issuing Lender shall not at any time be obligated to issue any Letter of Credit if (i) such issuance would conflict with, or cause the Issuing Lender or any L/C Participant to exceed any limits imposed by, any applicable Requirement of Law or (ii) any Lender is at that time a Defaulting Lender, unless the Issuing Lender has entered into arrangements, including the delivery of Cash Collateral, satisfactory to the Issuing Lender (in its sole discretion) with the Borrower or such Lender to eliminate the Issuing Lender’s actual or potential Fronting Exposure (after giving effect to Section 2.23(a)(iv)) with respect to the Defaulting Lender arising from either the Letter of Credit then proposed to be issued or that Letter of Credit and all other L/C Obligations as to which the Issuing Lender has actual or potential Fronting Exposure, as it may elect in its sole discretion.

  • Loan Commitment Subject to the terms and conditions of this Agreement and in reliance upon the representations and warranties of the Company herein set forth, the Lender hereby agrees to lend to the Company on the Closing Date and thereafter up to $16,000,000 in the aggregate (the "Loan") consisting of $8,000,000 of 7-year Tranche advances and $8,000,000 of 10-year Tranche advances. The Lender's commitment to make the Loan to the Company pursuant to this Section 2.1 is herein called the "Loan Commitment."

  • Revolving Loan Commitments (a) Subject to the terms and conditions set forth herein, each Revolving Lender, severally and not jointly, shall (i) make Revolving Loans (other than Revolving LC Loans) to the Borrower during the Revolving Loan Availability Period, in an aggregate principal amount not in excess of such Revolving Lender’s Available Revolving Loan Commitment and (ii) participate in the issuance of any Revolving LCs (and any drawings of the Revolving LC Available Amounts thereunder) from time to time during the Revolving Loan Availability Period in an aggregate outstanding principal amount not in excess of such Revolving Lender’s Revolving Loan Commitment. (b) After giving effect to the making of any Revolving Loans (other than Revolving LC Loans), the aggregate outstanding principal amount of all Revolving Loans shall not exceed the Available Aggregate Revolving Loan Commitment at such time. (c) Each Revolving Loan Borrowing shall be in an amount specified in a Borrowing Notice delivered pursuant to Section 2.7. (d) Proceeds of the Revolving Loans (other than Revolving LC Loans which shall be used to repay the Revolving LC Issuing Bank for Revolving LC Disbursements) shall be used solely for (i) the payment of transaction fees and expenses, (ii) payment of gas purchase, hedging, transportation, balancing and storage costs and expenses (including to meet credit support requirements under gas purchase, hedging, transportation, balancing or storage agreements), (iii) to provide credit support as may be required from time to time under Project-related agreements on behalf of the Borrower or the RG Facility Entities, (iv) to fund in cash or to issue Revolving LCs to satisfy the DSRA Reserve Amount in respect of any Senior Secured Debt Instrument, and (v) other working capital and other general corporate purposes. (e) Revolving Loans repaid or prepaid may be re-borrowed at any time and from time to time until the expiration of the Revolving Loan Availability Period.

  • Term Loan Commitments Subject to the terms and conditions hereof, and relying upon the representations and warranties herein set forth, each Lender severally agrees to make a term loan (the “Term Loan”) to the Borrower on the Closing Date in such principal amount as the Borrower shall request up to, but not exceeding such Lender’s Term Loan Commitment.

  • Revolving Commitment Subject to the terms and conditions hereof and in reliance upon the representations and warranties set forth herein, each Lender severally agrees to make available to the Borrower such Lender's Revolving Commitment Percentage of revolving credit loans requested by the Borrower in Dollars ("REVOLVING LOANS") from time to time from the Closing Date until the Maturity Date, or such earlier date as the Revolving Commitments shall have been terminated as provided herein; PROVIDED, HOWEVER, that the sum of the aggregate outstanding principal amount of Revolving Loans shall not exceed ONE HUNDRED MILLION DOLLARS ($100,000,000) (as such aggregate maximum amount may be reduced from time to time as provided in Section 3.4, the "REVOLVING COMMITTED AMOUNT"); PROVIDED, FURTHER, (A) with regard to each Lender individually, such Lender's outstanding Revolving Loans shall not exceed such Lender's Revolving Commitment Percentage of the Revolving Committed Amount, and (B) the sum of the aggregate outstanding principal amount of Revolving Loans PLUS LOC Obligations PLUS Swingline Loans shall not exceed the Revolving Committed Amount. The initial advance of the Revolving Loans on the Closing Date shall consist solely of Base Rate Loans. Thereafter, Revolving Loans may consist of Base Rate Loans or Eurodollar Loans, or a combination thereof, as the Borrower may request; PROVIDED, HOWEVER, that no more than 15 Eurodollar Loans shall be outstanding hereunder at any time (it being understood that, for purposes hereof, Eurodollar Loans with different Interest Periods shall be considered as separate Eurodollar Loans, even if they begin on the same date, although borrowings, extensions and conversions may, in accordance with the provisions hereof, be combined at the end of existing Interest Periods to constitute a new Eurodollar Loan with a single Interest Period). Revolving Loans hereunder may be repaid and reborrowed in accordance with the provisions hereof.

  • Revolving Loan Commitment Each Lender with a Revolving Loan Commitment agrees to make loans on a revolving basis (“Revolving Loans”) from time to time until the Termination Date in such Lender’s Pro Rata Share of such aggregate amounts as the Company may request from all Lenders; provided that the Revolving Outstandings will not at any time exceed Revolving Loan Availability.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!