Non-Standard System Sample Clauses

Non-Standard System. 4.6.1 Subject to Customer's compliance with all other terms and conditions of this Agreement, Sabre agrees to allow Customer to connect or use Non-Standard System with the System without Sabre's prior written consent, except to the extent that such Non-Standard System consists of communications data lines, emulator boards, gateways, routers, ticket printers or other devices connecting directly to the System or Sabre System ("Reserved Equipment"). Sabre consent for Reserved Equipment shall be conditioned upon Sabre certification and approval prior to its use with the System. Such consent may be withheld in order to preserve the integrity of the Sabre System and the System. 4.6.2 Customer shall represent and warrant to Sabre that the Non-Standard System and its connection to the System conforms in all respects to Sabre's Non-Standard System standards and specifications, a copy of which Customer may request from Sabre, and will not be altered or modified without prior notice to Sabre. 4.6.3 Customer shall remove all Non-Standard System placed on or within the Standard Equipment prior to Sabre's removing such Standard Equipment from Customer's Site. Sabre disclaims, and Customer hereby waives and indemnifies, any responsibility or liability on the part of Sabre, under any theory whatsoever, for any Non-Standard System that Customer has failed to remove from the Standard Equipment prior to Sabre's removing such Standard Equipment from Customer's Site. 4.6.4 Customer shall not use Non-Standard System in conjunction with the System for any function not specifically outlined in this Agreement and any use or attempted use for any other function shall constitute an Event of Default under Article 14.1.2. 4.6.5 Customer shall also ensure that Sabre has access to Customer's Site on request for conducting on-site inspections, testing or to oversee installation of the Non-Standard System. Customer is responsible for ensuring that any Standard Equipment at Customer's Site is connected to the System for the purposes of performing testing and diagnostics on such Standard Equipment by Sabre's designated agent. If Sabre reasonably determines that the Non-Standard System is causing, or contributing to, a problem with the System, the Sabre System or another Sabre Subscriber's access to or operation of the Sabre System, then Sabre has the right to immediately restrict access to the Sabre System upon notice to Customer as provided for in this Agreement and Sabre shall have no lia...
Sample 1See All (5)
AutoNDA by SimpleDocs
Non-Standard System. All maintenance of the Non-Standard System shall be the sole responsibility of the Customer. TSG will accept calls to SABRE Customer Services regarding a malfunction of the Non-Standard System if TSG determines that the malfunction is not attributable to the Non-Standard System. Customer shall pay TSG's then prevailing maintenance charges for any maintenance calls for the SABRE System or the System if TSG reasonably determines that the problems were caused by or attributable to the Non-Standard System.
Sample 1Sample 2Sample 3
Non-Standard System. Customer shall not connect or use any hardware, software, or firmware not acquired from American with SABRE or the System without American's prior written consent, which shall be granted provided that such hardware, software, or firmware is approved by American for use with SABRE and Customer executes the Non-Standard System Amendment.
Sample 1Sample 2
Non-Standard System. Customer shall not connect or use any hardware, software, or firmware not acquired from SGI with SABRE or the System without SGI's prior written consent, which shall be granted provided that such hardware, software, or firmware is approved by SGI for use with SABRE and Customer executes the Non-Standard System Amendment.
Sample 1Sample 2
Non-Standard System. Customer shall not connect or use any hardware, or ------------------- firmware not acquired from Sabre with the Sabre TravelBase System without Sabre's prior written consent, which consent Sabre shall not unreasonably withhold or delay and which shall be granted provided that such hardware, or firmware is approved by Sabre for use with Sabre TravelBase System and Customer executes the Non-Standard System Amendment.
Sample 1
Non-Standard System. All maintenance of the Non-Standard System shall be the sole responsibility of the Customer. Sabre will accept calls to Sabre Customer Services regarding a malfunction of the Non-Standard System if Sabre determines that the malfunction is not attributable to the Non-Standard System. Customer shall pay Sabre's then prevailing maintenance charges for any maintenance calls for the Sabre System or the System if Sabre reasonably determines that the problems were caused by or attributable to the Non-Standard System.
Sample 1

Related to Non-Standard System

  • Construction Standards The Developer shall construct the Subdivision in accordance with the Subdivision Plan, as approved by the Planning Commission, and if applicable, the requirements of the Design Review Committee, and in accordance with the requirements of (a) the Millington Subdivision Regulations; (b) standards and specifications contained in “Local Public Works Standard, and Specifications”, as amended to include specific requirements for construction in Millington, TN; (c) the Building Code (as adopted by Shelby County); (d) the Fire Code (as adopted by Shelby County); (e) the Millington Zoning Ordinance; and (f) the applicable Ordinances of the City. Items (a) through (f) are hereby made a part of this Agreement by reference and are hereinafter referred to collectively as the “Codes”. References herein to the Codes are to those in effect on the Effective Date unless amendments are hereafter made which apply to all improvements or subdivisions regardless of their date of commencement and/or completion of construction. The Conditions of Approval established by the Planning Commission, and, as applicable, the Design Review Committee (any or all of which as may have been modified by the Board of Mayor and Aldermen) are set forth in Exhibit “A” to this Agreement and are incorporated herein by reference and made a part hereof.

  • Reformulation Standard “Reformulated Products” shall mean Products that contain concentrations less than or equal to 0.1% (1,000 parts per million (ppm)) of DEHP when analyzed pursuant to U.S. Environmental Protection Agency testing methodologies 3580A and 8270C or other methodology utilized by federal or state government agencies for the purpose of determining the phthalate content in a solid substance.

  • Design Standards Most recent edition of the “Owner’s Design Standards,” including any partial updates as may be directed by the Owner.

  • System Upgrade Facilities and System Deliverability Upgrades Connecting Transmission Owner shall design, procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Appendix A hereto. The responsibility of the Developer for costs related to System Upgrade Facilities and System Deliverability Upgrades shall be determined in accordance with the provisions of Attachment S to the NYISO OATT.

  • System Access CUSTOMER agrees to provide to PROVIDER, at CUSTOMER’S expense, necessary access to the mainframe computer and related information technology systems (the “System”) on which CUSTOMER data is processed during the times (the “Service Hours”) specified in the PSAs, subject to reasonable downtime for utility outages, maintenance, performance difficulties and the like. In the event of a change in the Service Hours, CUSTOMER will provide PROVIDER with at least fifteen (15) calendar days written notice of such change.

  • System Upgrades The Connecting Transmission Owner shall procure, construct, install, and own the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement. To the extent that design work is necessary in addition to that already accomplished in the Class Year Interconnection Facilities Study for the Interconnection Customer, the Connecting Transmission Owner shall perform or cause to be performed such work. If all the Parties agree, the Interconnection Customer may construct System Upgrade Facilities and System Deliverability Upgrades. 5.2.1 As described in Section 32.3.5.3 of the SGIP in Attachment Z of the ISO OATT, the responsibility of the Interconnection Customer for the cost of the System Upgrade Facilities and System Deliverability Upgrades described in Attachment 6 of this Agreement shall be determined in accordance with Attachment S of the ISO OATT, as required by Section 32.3.5.3.2

  • Benchmarks for Measuring Accessibility For the purposes of this Agreement, the accessibility of online content and functionality will be measured according to the W3C’s Web Content Accessibility Guidelines (WCAG) 2.0 Level AA and the Web Accessibility Initiative Accessible Rich Internet Applications Suite (WAI-ARIA) 1.0 for web content, which are incorporated by reference.

  • Design Criteria and Standards All Projects/Services shall be performed in accordance with instructions, criteria and standards set forth by the Director.

  • System Access Control Data processing systems used to provide the Cloud Service must be prevented from being used without authorization.

  • Reformulation Standards A “reformulated” product (a) contains lead in concentrations that do not exceed 90 parts per million, equivalent to 0.009%, in any exterior parts analyzed pursuant to U.S. Environmental Protection Agency (EPA) methodologies 3050B and 6010B, or (b) yields a result of no more than 1.0 micrograms of lead when sampled according to NIOSH 9100 protocol and analyzed according to EPA 6010B. In addition to the above tests, the Settling Entity may use equivalent methods utilized by any California or federal agency to determine lead content in a solid substance or the amount of the bioavailability of the toxicant through a wipe test, respectively.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!