Patrol Cars Sample Clauses

Patrol Cars. 1. The Borough agrees to provide air-conditioned patrol cars with AM radios and heaters. In addition, the patrol car shall contain a complete police package. 2. The Borough agrees to provide the following protective and safety items. Said items shall be installed in all patrol cars and shall be replaced or repaired if damaged. a. A protective cage located between the front and rear seats. The cage shall be the type with a built-in roll bar. b. Shotguns with appropriate locked racks, the keys to which are to be supplied only to officers certified by the Chief of Police as qualified to handle shotguns by virtue of special training. Shotguns to remain in the interior of the car. c. Appropriate warning lights, spotlights, and alley lights all mounted on the exterior area of the patrol car. d. One (1) portable radio, and flashlight for every man assigned to the vehicle.
Sample 1
AutoNDA by SimpleDocs
Patrol Cars. A. The Borough agrees to provide air conditioned cars with AM radios and full "Police Package" in same.
Sample 1Sample 2
Patrol Cars. A. The City shall solicit bids for a new patrol car whenever an old patrol car reaches 75,000 mileage. Any patrol car determined unsafe for patrol use will be removed from such duty. Said determination to be made by the Chief of Police. B. The City shall form a joint committee composed of one representative from the City and one from the Xxxxx Park Police Officers Association for the purpose of formulating written specifications and performance standards for patrol cars. The City shall enforce upon the suppliers of patrol cars, any such specifications and standards agreed upon by the committee.
Sample 1
Patrol Cars. All patrol cars shall be purchased with the police “package” as well as A.M. radios and air conditioning. Although every effort shall be made to maintain the radios and air conditioning in operating condition, the malfunction of said equipment on any given occasion shall not be grounds for refusal to operate said patrol cars.
Sample 1

Related to Patrol Cars

  • Signaling Link Transport 9.2.1 Signaling Link Transport is a set of two or four dedicated 56 kbps transmission paths between Global Connection-designated Signaling Points of Interconnection that provide appropriate physical diversity.

  • HIV/AIDS Model Workplace Guidelines Grantee will: a. implement the System Agency’s policies based on the Human Immunodeficiency Virus/Acquired Immunodeficiency Syndrome (HIV/AIDS), AIDS Model Workplace Guidelines for Businesses at xxxx://xxx.xxxx.xxxxx.xx.xx/hivstd/policy/policies.shtm, State Agencies and State Grantees Policy No. 090.021. b. educate employees and clients concerning HIV and its related conditions, including AIDS, in accordance with the Texas. Health & Safety Code §§ 85.112-114.

  • Shift Rotation Routine shift rotation is not an approach to staffing endorsed by the Employer. Except for emergency situations where it may be necessary to provide safe patient care, shift rotation will not be utilized without mutual consent. If such an occasion should ever occur, volunteers will be sought first. If no one volunteers, the Employer will rotate shifts on an inverse seniority basis until the staff vacancies are filled.

  • Supplier Personnel The Customer and Supplier agree and acknowledge that in the event of the Supplier ceasing to provide the Services or part of them for any reason, Call Off Schedule 10 (Staff Transfer) shall apply. The Supplier shall not and shall procure that any relevant Sub-Contractor shall not take any step (expressly or implicitly and directly or indirectly by itself or through any other person) without the prior written consent of the Customer to dissuade or discourage any employees engaged in the provision of the Services from transferring their employment to the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor. During the Termination Assistance Period, the Supplier shall and shall procure that any relevant Sub-Contractor shall: give the Customer and/or the Replacement Supplier and/or Replacement Sub-Contractor reasonable access to the Supplier's personnel and/or their consultation representatives to present the case for transferring their employment to the Customer and/or the Replacement Supplier and/or to discuss or consult on any measures envisaged by the Customer, Replacement Supplier and/or Replacement Sub-Contractor in respect of persons expected to be Transferring Supplier Employees; co-operate with the Customer and the Replacement Supplier to ensure an effective consultation process and smooth transfer in respect of Transferring Supplier Employees in line with good employee relations and the effective continuity of the Services. The Supplier shall immediately notify the Customer or, at the direction of the Customer, the Replacement Supplier of any period of notice given by the Supplier or received from any person referred to in the Staffing Information, regardless of when such notice takes effect. The Supplier shall not for a period of twelve (12) months from the date of transfer re-employ or re-engage or entice any employees, suppliers or Sub-Contractors whose employment or engagement is transferred to the Customer and/or the Replacement Supplier except that this paragraph 10.5 shall not apply where an offer is made pursuant to an express right to make such offer under Call Off Schedule 10.1 (Staff Transfer) in respect of a Transferring Supplier Employee not identified in the Supplier's Final Supplier Personnel List.

  • Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.

  • Local Circuit Switching Capability, including Tandem Switching Capability 4.1.3.1 Definition 4.1.3.2 Notwithstanding BellSouth’s general duty to unbundle local circuit switching, BellSouth shall not be required to unbundle local circuit switching for <<customer_name>> when <<customer_name>> serves end-users with four (4) or more voice-grade (DS-0) equivalents or lines in locations served by BellSouth’s local circuit switches, which are in the following MSAs: Atlanta, GA; Miami, FL; Orlando, FL; Ft. Lauderdale, FL; Charlotte-Gastonia-Rock Hill, NC; Greensboro-Winston Salem-High Point, NC; Nashville, TN; and New Orleans, LA, and BellSouth has provided non-discriminatory cost based access to the Enhanced Extended Link (EEL) throughout Density Zone 1 as determined by NECA Tariff No. 4 as in effect on January 1, 1999. 4.1.3.3 In the event that <<customer_name>> orders local circuit switching for a single end user account name at a single physical end user location with four (4) or more 2-wire voice-grade loops from a BellSouth central office in an MSA listed above, BellSouth shall charge <<customer_name>> the market based rate in Exhibit C for use of the local circuit switching functionality for the affected facilities. 4.1.3.4 A featureless port is one that has a line port, switching facilities, and an interoffice port. A featured port is a port that includes all features then capable or a number of then capable features specifically requested by <<customer_name>>. Any features that are not currently then capable but are technically feasible through the switch can be requested through the NBR/BFR process. 4.1.3.5 BellSouth will provide to <<customer_name>> customized routing of calls: (i) to a requested directory assistance services platform; (ii) to an operator services platform pursuant to Section 10 of Attachment 2; (iii) for <<customer_name>>’s PIC’ed toll traffic in a two (2) PIC environment to an alternative OS/DA platform designated by <<customer_name>>. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers. 4.1.3.6 Remote Switching Module functionality is included in Switching Capability. The switching capabilities used will be based on the line side features they support. 4.1.3.7 Switching Capability will also be capable of routing local, intraLATA, interLATA, and calls to international customer’s preferred carrier; call features (e.g. call forwarding) and Centrex capabilities. 4.1.3.8 Where required to do so in order to comply with an effective Commission order, BellSouth will provide to <<customer_name>> purchasing local BellSouth switching and reselling BellSouth local exchange service under Attachment 1, selective routing of calls to a requested directory assistance services platform or operator services platform. <<customer_name>> customers may use the same dialing arrangements as BellSouth customers, but obtain a <<customer_name>> branded service.

  • Educational Services Any service or supply for education, training or retraining services or testing including: special education, remedial education; cognitive remediation; wilderness/outdoor treatment, therapy or adventure programs (whether or not the program is part of a Residential Treatment facility or otherwise licensed institution); job training or job hardening programs; educational services and schooling or any such related or similar program including therapeutic programs within a school setting.

  • Unbundled Digital Loops 2.3.1 BellSouth will offer Unbundled Digital Loops (UDL). UDLs are service specific, will be designed, will be provisioned with test points (where appropriate), and will come standard with OC and a DLR. The various UDLs are intended to support a specific digital transmission scheme or service. 2.3.2 BellSouth shall make available the following UDLs, subject to restrictions set forth herein:

  • Transport The Parents consent to the Pupil travelling by any form of public transport and / or in a motor vehicle driven by a responsible adult who is duly licensed and insured to drive a vehicle of that type.

  • Fleet In general, any in-house mechanic may be assigned to respond to any emergency during normal working hours in any of the three operating companies. (This does not supersede the Mechanic Personnel Working Across 309 Jurisdictional Boundaries Agreement dated October 4, 2007). Example 1: Lincoln (CILCO) unit breaks down in the northern part of its territory. It would make sense for the Bloomington (rp) mechanic to respond to the service call. Lincoln staffs a 2nd shift mechanic only and the vehicle in need of repair is closer to the Bloomington garage. This example covers areas that both have Ameren in-house mechanics. Example 2: Any CIPS 702 units could be repaired by Ameren staffed mechanics in 702 territories. This would generally happen in areas that are in close proximity to an IP or CILCO garage. This example covers 702 CIPS areas that do not have Ameren in-house mechanics. These jobs currently are outsourced. Perform Preventive Maintenance on CIPS 702 equipment at individual operating centers where advantageous. This work is currently outsourced. It is not the company’s intent to perform all PM’s with in-house mechanics.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!