PROCESS ENGINEERING Sample Clauses

PROCESS ENGINEERING. As part of the process engineering Scope of Work, Contractor shall develop and/or progress Drawings, calculations, datasheets, and other associated engineering documents in order to bring them to their final issue status in accordance to Attachment A-1. The following documents listed in Attachment A-3 shall be reissued if there is a scope change or a Defect that requires it: • Process Basis of Design; • Process and utility flow diagrams; • Heat and material balances for all design cases; • Material selection diagrams; • process datasheets for Equipment • Steady state process models; The following documents will be issued per Attachment A-1. • Utility summaries • Datasheets for instruments including all control valves, safety valves, on/off valves, RO, flow meter, analyzers, etc. • Piping and instrumentation diagrams • Flare Load Summary • Design calculations and development of: - System hydraulics; - Surge analysis; - Line sizing; - Sizing of the relief system, including relief valves; - Insulation system for cryogenic services, material selection, thickness; - First fill volume for refrigerant, hot oil, amine; - Emergency depressurization calculations; • Cause and effect diagrams (CED) • HAZOP and LOPA for vendor packages • Lists: - Equipment list - Line designation tables (LDTs); - Line Case Summaries (LCSs); - List of chemicals & catalysts
Sample 1
AutoNDA by SimpleDocs
PROCESS ENGINEERING i. The Parties have agreed on a comparability protocol (the “Comparability Protocol”) and an engineering protocol (the “Engineering Protocol”) for Process Engineering, which together contain the manufacturing conditions, process controls, testing and expected outcomes for Process Engineering, including drug substance and drug product stability, either of which may be amended from time to time by mutual agreement of the Parties (the Comparability Protocol and the Engineering Protocol together, the “Process Engineering Protocols”).
Sample 1

Related to PROCESS ENGINEERING

  • Engineering Network engineering handles the technical aspects of the project, resolution of problems escalated by the NOC, planning for future network expansion, and improving performance and process. Engineering interacts directly with AOL and the NOC.

  • Reverse Engineering The Licensee shall not reverse engineer, decompile or disassemble the object code version of the Computer Program without the prior written approval of the Licensor.

  • Manufacturing Intrexon shall have the option and, in the event it so elects, shall use Diligent Efforts, to perform any manufacturing activities in connection with the Aquaculture Program that relate to the Intrexon Materials, including through the use of a suitable Third Party contract manufacturer. To the extent that Intrexon so elects, Intrexon may request that AquaBounty and Intrexon establish and execute a separate manufacturing and supply agreement, which agreement will establish and govern the production, quality assurance, and regulatory activities associated with manufacture of Intrexon Materials. Except as provided in Section 4.1, any manufacturing undertaken by Intrexon pursuant to the preceding sentence shall be performed in exchange for cash payments equal to Intrexon’s Fully Loaded Cost in connection with such manufacturing, on terms to be negotiated by the Parties in good faith. In the event that Intrexon does not manufacture Intrexon Materials or bulk quantities of other components of AquaBounty Products, then Intrexon shall provide to AquaBounty or a contract manufacturer selected by AquaBounty and approved by Intrexon (such approval not to be unreasonably withheld) all Information Controlled by Intrexon that is (a) related to the manufacturing of such Intrexon Materials or bulk qualities of other components of AquaBounty Products for use in the Field and (b) reasonably necessary to enable AquaBounty or such contract manufacturer (as appropriate) for the sole purpose of manufacturing such Intrexon Materials or bulk quantities of other components of AquaBounty Products. The costs and expenses incurred by Intrexon in carrying out such transfer shall be borne by Intrexon. Any manufacturing Information transferred hereunder to AquaBounty or its contract manufacturer shall not be further transferred to any Third Party, including any Product Sublicensee, or any AquaBounty Affiliate without the prior written consent of Intrexon; provided, however, that Intrexon shall not unreasonably withhold such consent if necessary to permit AquaBounty to switch manufacturers.

  • Engineering Services The Borrower’s Engineer will provide engineering services covering planning and design, operation of the System, and the supervision and inspection of the construction of the Project. The Borrower’s Engineer will provide to the Department the certificate required by Section 3.4.

  • No Reverse Engineering Licensee may utilize and study the design, performance and operation of Xbox solely for the purposes of developing the Software Title. Notwithstanding the foregoing, Licensee shall not, directly or indirectly, reverse engineer or aid or assist in the reverse engineering of all or any part of Xbox except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation. Reverse engineering includes, without limitation, decompiling, disassembly, sniffing, peeling semiconductor components, or otherwise deriving source code. In addition to any other rights and remedies that Microsoft may have under the circumstances, Licensee shall be required in all cases to pay royalties to Microsoft in accordance with Section 6 below with respect to any games or other products that are developed, marketed or distributed by Licensee, and derived in whole or in part from the reverse engineering of Xbox or any Microsoft data, code or other material.

  • Commissioning preparation of a system or systems to allow hydrocarbons or other process fluids to be safely introduced into the system or systems for processing. In this phase testing will focus on systems, including utilities.

  • Design 4.2.1 Seller, at no cost to Edison, shall:

  • Manufacturing Technology Transfer With respect to each Technology Transfer Product, upon AbbVie’s written request after the Inclusion Date for the Included Target to which such Technology Transfer Product is Directed, Morphic shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party manufacturer) of all Morphic Know-How and Joint Know-How relating to the then-current process for the Manufacture of such Technology Transfer Product (the “Manufacturing Process”) and to implement the Manufacturing Process at facilities designated by AbbVie (such transfer and implementation, as more fully described in this Section 5.3, the “Manufacturing Technology Transfer”). To assist with the Manufacturing Technology Transfer, Morphic will make its personnel reasonably available to AbbVie during normal business hours for up to [***] FTE hours with respect to each Included Target (in each case, free of charge to AbbVie) to transfer and implement the Manufacturing Process under this Section 5.3. Thereafter, if requested by AbbVie, Morphic shall continue to perform such obligations; provided, that AbbVie will reimburse Morphic for its full-time equivalent (FTE) costs (for clarity, in excess of [***] FTE hours) and any reasonable and verifiable out-of-pocket costs incurred in providing such assistance. CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS NOT MATERIAL AND WOULD LIKELY CAUSE COMPETITIVE HARM TO THE COMPANY IF PUBLICLY DISCLOSED.

  • Investment Analysis and Implementation In carrying out its obligations under Section 1 hereof, the Advisor shall:

  • Testing Landlord shall have the right to conduct annual tests of the Premises to determine whether any contamination of the Premises or the Project has occurred as a result of Tenant’s use. Tenant shall be required to pay the cost of such annual test of the Premises; provided, however, that if Tenant conducts its own tests of the Premises using third party contractors and test procedures acceptable to Landlord which tests are certified to Landlord, Landlord shall accept such tests in lieu of the annual tests to be paid for by Tenant. In addition, at any time, and from time to time, prior to the expiration or earlier termination of the Term, Landlord shall have the right to conduct appropriate tests of the Premises and the Project to determine if contamination has occurred as a result of Tenant’s use of the Premises. In connection with such testing, upon the request of Landlord, Tenant shall deliver to Landlord or its consultant such non-proprietary information concerning the use of Hazardous Materials in or about the Premises by Tenant or any Tenant Party. If contamination has occurred for which Tenant is liable under this Section 30, Tenant shall pay all costs to conduct such tests. If no such contamination is found, Landlord shall pay the costs of such tests (which shall not constitute an Operating Expense). Landlord shall provide Tenant with a copy of all third party, non-confidential reports and tests of the Premises made by or on behalf of Landlord during the Term without representation or warranty and subject to a confidentiality agreement. Tenant shall, at its sole cost and expense, promptly and satisfactorily remediate any environmental conditions identified by such testing in accordance with all Environmental Requirements. Landlord’s receipt of or satisfaction with any environmental assessment in no way waives any rights which Landlord may have against Tenant.

Time is Money Join Law Insider Premium to draft better contracts faster.