Products to be sold Sample Clauses

Products to be sold. Products to be sold will be admitted at the discretion of the Market Manager based on items listed on the Vendor Agreement. If additional items are to be sold please see the Market Manager BEFORE set up. Vendors selling “like items” may be limited. All food handlers must have a Food Handlers Permit from the Health Department. • All Producers: Fresh food products they have personally prepared; meats, seafood, ciders, jams, jellies, baked goods, must meet all federal, state and local health requirements and have necessary licensing as well as any farm raised meats or eggs. A copy of said license or permit should be given to the market manager prior to set up. • Resellers: One who sells produce purchased directly from the xxxxxx in Washington or bordering areas directly to the consumer • Farmers: One who raises produce, animals or plants to be sold at the market.
AutoNDA by SimpleDocs
Products to be sold to Dealer during the term of this Agreement will be by way of purchase orders ("Orders") placed by the Dealer with Fujitsu. All preprinted terms and conditions on such Orders shall be governed and superseded by the terms and conditions of this Agreement and this Agreement shall in all events be the controlling document.
Products to be sold. According and subject to the conditions of this Agreement, the Buyer hereby undertakes to purchase from the Seller, and the Seller hereby undertakes to sell and transfer to the Buyer, 50,000 (Fifty Thousand) units of a cellular medical PDA product that is described in more details in Appendix A attached and incorporated hereby by reference (the "Purchased Products"). To remove doubt it is hereby agreed that the Purchased Products will include all the software necessary to operate according to the Product Specification (as defined above). However, the software to manage the subscribers and the center will be the Buyer's including the taking care of the EKG data to be transferred.
Products to be sold. Restrictions; New Products 2.1 APTI agrees to sell to 3M and 3M agrees to buy from APTI the private label inflatable packaging products which are described in the attached Exhibit A (PRODUCTS). Specifications of the PRODUCTS will be agreed to between the parties and delivered to APTI prior to the commencement of this Agreement. APTI must not change PRODUCTS without the prior written consent of 3M. If APTI wishes to change a PRODUCT, then APTI will provide 3M with a written request to change the PRODUCT, including a description of the proposed change and whether or not the change would affect the price of the PRODUCT. 3M agrees to inform APTI concerning whether or not 3M is willing to consent to the change within ninety (90) days after receipt of the request. 2.2 a. APTI grants 3M, its subsidiaries and affiliates the exclusive right to distribute, sell or otherwise dispose of in the retail market throughout the world all PRODUCTS listed in section A of Exhibit A. The retail market includes selling directly and indirectly to consumers and small businesses. 3M will have the exclusive right to sell to mass merchants, warehouse clubs, office supply catalogs, drug stores, variety stores, grocery stores, hardware stores, home centers, bookstores, office superstores, retail mailing centers (e.
Products to be sold. (a) If at least 14 days before the Event you are provided with details of products of the Event’s sponsors (Notified Products), you must only sell: (i) the Notified Products; or (ii) products that do not compete with the Notified Products. (b) You must obtain all products to be sold at your own cost.
Products to be sold. The Company hereby agrees to sell to DISTRIBUTOR Products covered in Exhibit “A.” A. DISTRIBUTOR shall be responsible for all costs of shipping the purchased Products from point of manufacture, San Juan Capistrano, California. B. The Company represents and agrees that it will use all commercially reasonable efforts to manufacture and deliver any Products ordered by DISTRIBUTOR on a priority basis, but in all events in a timely manner. Subject to availability of component parts and Acts of God, the Company will ship all orders within 45 days of receipt of funds. C. The Company shall be responsible for all manufacturing, operations, warehousing and shipping of all sales orders to all customers.
Products to be sold. The Company hereby agrees to sell to DISTRIBUTOR Products covered in Exhibit “A.” A. DISTRIBUTOR shall be responsible for all costs of shipping the purchased Products from its plant in Sxx Xxxx Xxxxxxxxxx, XX 00000. B. The Company represents and agrees that it will use all commercially reasonable efforts to manufacture and deliver any Products ordered by DISTRIBUTOR on a priority basis, but in all events in a timely manner. Subject to availability of component parts and Acts of God, the Company will ship all orders within 45 days of receipt of funds.
AutoNDA by SimpleDocs
Products to be sold 

Related to Products to be sold

  • Assets to be Sold On the Closing Date, subject to the terms and conditions set forth herein, Seller shall, provided that all of the conditions set forth in Section 7 hereto have been satisfied, sell, assign, transfer, convey and deliver to Buyer, and Buyer shall purchase and take from Seller, in each case effective as of July 1, 2011 (the “Effective Date”), all of Seller’s right, title and interest in and to the following assets in clauses (a) through (f) below (collectively, the “Sold Assets”), free and clear of all liabilities, debts, mortgages, liens, and encumbrances except as set forth in this Agreement: a. The Containers; such Containers being hereinafter referred to, collectively, as the “Sale Containers”; b. All right, title and interest of the Seller in any lease to which any Sale Container is subject on the Effective Date (each, a “Lease” and collectively, the “Leases”), in each case, to the extent (but only to the extent) of each Sale Container subject to the terms of such Lease (it being acknowledged and agreed that containers owned by various persons may be subject to the terms of a Lease); c. All of Seller’s right, title and interest in and to (i) any purchase agreement pursuant to which Seller acquired any of the Sale Containers, (ii) warranties by the manufacturers or original sellers of the Sale Containers, in each case, to the extent (but only to the extent) that such purchase agreement or warranty relates to a Sale Container, and (iii) any security deposit(s) held by Seller under a Lease to the extent (but only to the extent) that such security deposit relates to a Sale Container; d. All proceeds of the Sale Containers to the extent accrued on or after the Effective Date, including, without limitation, payments of rent, termination values, casualty values and insurance payments accrued with respect to the Sale Containers on or after the Effective Date; and e. All books, files, papers, correspondence, databases, documents, records and other documentation thereof regarding any of the Sale Containers that are maintained on behalf of Seller by CCC in the ordinary course of business (the “Books and Records”); provided, however, that, as long as CCC’s affiliate, Cronos Containers (Cayman) Ltd., a company organized and existing under the laws of the Cayman Islands (“CAY”), manages the Sale Containers for Buyer, then and in such event the Books and Records shall be maintained by and in the possession of CAY, except as otherwise directed by Buyer as owner of the Sale Containers.

  • Information to be Supplied (a) The information supplied or to be supplied by the Company for inclusion or incorporation by reference in (i) the Registration Statement will, at the time the Registration Statement is filed with the SEC and at the time it becomes effective under the Securities Act, not contain any untrue statement of a material fact or omit to state any material fact required to be stated therein or necessary in order to make the statements therein not misleading and (ii) the Schedule 13E-3 will, at the time it is first filed with the SEC and at any time it is amended or supplemented, not contain any untrue statement of a material fact or omit to state any material fact required to be stated therein or necessary in order to make the statements therein not misleading. (b) The Proxy Statement will, at the time of the mailing thereof and at the time of the Company Stockholder Meeting, not contain any untrue statement of a material fact or omit to state any material fact required to be stated therein or necessary in order to make the statements therein, in light of the circumstances under which they are made, not misleading or omit to state any material fact necessary to correct any statement in any earlier communication with respect to the solicitation of proxies for the Company Stockholder Meeting which has become untrue or misleading. (c) The Registration Statement and the Schedule 13E-3 (in each case with respect to information provided by or incorporated by reference from, the Company) and the Proxy Statement will comply as to form in all material respects with the provisions of the Securities Act and the Exchange Act. (d) Notwithstanding the foregoing, the Company makes no representation or warranty with respect to any statements made or incorporated by reference in the Registration Statement, the Proxy Statement or the Schedule 13E-3 based on information supplied by Holding or Acquiror for inclusion or incorporation by reference therein.

  • Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

  • Purchase of Products You agree to purchase from Us the hardware products, software licenses and services listed on the Order Form, together with all existing accessories, attachments, replacements, and additions (collectively the “Products”) upon the terms stated herein. For the avoidance of doubt, postage meters for use in mailing machines are excluded from the definition of Products. This Purchase Agreement is binding on You as of the date You sign it. This Purchase Agreement is not binding on Us until We sign it or until the Products are shipped, whichever happens first.

  • Assets to be Purchased At Closing (as hereinafter defined) subject to the terms and conditions of this Agreement, Seller shall sell to Buyer, and Buyer shall purchase from Seller, all or substantially all of Seller's assets utilized in the operation of Seller's Boulder Facility (the "Business"), free and clear of all liens, encumbrances, and charges (the "Assets"), which Assets shall include without limitation the following: (a) all inventory owned, used or held for use with respect to Seller's Business, including parts, materials, packaging, works in progress and finished goods located at Seller's Boulder Facility at the close of business on the date of Closing, as hereinafter defined on the attached Schedule 1(a) (the "Inventory"); (b) all of Seller's right, title and interest in and to those certain fixed assets that are described on the attached Schedule 1(b) (the "Fixed Assets"); (c) all of Seller's right, title and interest in and to any and all licenses and permits, to the extent assignable, whether state, federal, county, municipal, or otherwise material to the operation of the Boulder Facility, leases, equipment warranties, maintenance contracts, service contacts and other commitments as may be assumed in writing by Buyer or as set forth on the attached Schedule 1(c); and (d) all of Seller's right, title and interest in and to the general intangibles and goodwill associated with the operation of the Assets at Seller's Boulder Facility, including all telephone numbers used by Seller at the Boulder Facility, access to certain books and records of Seller which pertain to the Boulder Facility Business, including sales, customer lists and suppliers, paid invoices, repair orders, employee records for the last three years, yellow page advertising (subject to Section 12.1), copies of pending sales orders, work in process and all other documents associated with the Boulder Business (the "Company Records").

  • Purchase Orders Unless otherwise authorized in writing by the Commissioner, no Product is to be delivered or furnished by Contractor until transmittal of an official Purchase Order from the Authorized User. Unless terminated or cancelled pursuant to the authority vested in the Commissioner, Purchase Orders shall be effective and binding upon the Contractor when placed in the mail or electronically transmitted prior to the termination of the contract period, addressed to the Contractor at the address for receipt of orders set forth in the Contract or in the Contract Award Notification. All Purchase Orders issued pursuant to Contracts let by the Commissioner must bear the appropriate Contract number and, if necessary, required State approvals. As deemed necessary, the Authorized User may confirm pricing and other Product information with the Contractor prior to placement of the Purchase Order. The State reserves the right to require any other information from the Contractor which the State deems necessary in order to complete any Purchase Order placed under the Contract. Unless otherwise specified, all Purchase Orders against Centralized Contracts will be placed by Authorized Users directly with the Contractor and any discrepancy between the terms stated on the vendor’s order form, confirmation or acknowledgment, and the Contract terms shall be resolved in favor of the terms most favorable to the Authorized User. Should an Authorized User add written terms and conditions to the Purchase Order that conflict with the terms and conditions of the Contract, the Contractor has the option of rejecting the Purchase Order within five business days of its receipt but shall first attempt to negotiate the additional written terms and conditions in good faith with the Authorized User, or fulfill the Purchase Order. Notwithstanding the above, the Authorized User reserves the right to dispute any discrepancies arising from the presentation of additional terms and conditions with the Contractor. If, with respect to an Agency Specific Contract let by the OGS Commissioner, a Purchase Order is not received by the Contractor within two weeks after the issuance of a Contract Award Notification, it is the responsibility of the Contractor to request in writing that the appropriate Authorized User forward a Purchase Order. If, thereafter, a Purchase Order is not received within a reasonable period of time, the Contractor shall promptly notify in writing the appropriate purchasing officer in OGS. Failure to timely notify such officer may, in the discretion of the OGS Commissioner and without cost to the State, result in the cancellation of such requirement by the OGS Commissioner with a corresponding reduction in the Contract quantity and price.

  • Firm Orders On a rolling basis during the term of the Product Agreement, Client will issue an updated [***] forecast on or before the [***]. This forecast will start on [***]. Unless otherwise agreed in the Product Agreement, the first [***] of this updated forecast will be considered binding firm orders. Concurrent with the [***] forecast, Client will issue a new firm written order in the form of a purchase order or otherwise (“Firm Order”) by Client to purchase and, when accepted by Patheon, for Patheon to manufacture and deliver the agreed quantity of the Products. The Delivery Date will not be less than [***] following the date that the Firm Order is submitted. Firm Orders submitted to Patheon will specify Client's purchase order number, quantities by Product type, monthly delivery schedule, and any other elements necessary to ensure the timely manufacture and shipment of the Products. The quantities of Products ordered in those written orders will be firm and binding on Client and may not be reduced by Client. Further, for [***] of the [***] forecast, Client commits that its Firm Orders for each of those months will be no less than [***], respectively, of the forecasted amounts for [***]. If Client orders less than the agreed volume, the parties will meet to discuss how to smooth production to meet demand. If it is not possible to smooth production to meet forecasted demand, Client will compensate Patheon for not meeting the Firm Order commitment by paying the [***] for the shortfall between what Client actually ordered and its Firm Order commitment as set forth above or as otherwise provided for in the applicable Product Agreement. The forgoing shall be Patheon’s sole and exclusive remedy for Client’s failure to meet the Firm Order commitment. No amounts shall be payable to Patheon if Client is unable to make the Firm Order commitment because of Force Majeure or because the Product is taken off the market due in response to an action by an Authority or otherwise as required by Applicable Law. Patheon commits to make [***] of the forecasted amounts available to Client, and will reserve [***] of its capacity to meet that commitment. Patheon shall notify Client as soon as possible of impending capacity constraints in relation to Client’s forecasts and/or changes in Client’s demands.

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Packaging Materials and Containers for Retail Sale 1. When packaging materials and containers in which a good is packaged for retail sales are classified in the Harmonized System with the good, they shall not be taken into account in determining whether all non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4.03. 2. When the good is subject to a requirement of regional value content, the value of these packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.

  • Manufacturers Promptly after obtaining actual knowledge thereof, notice of any Manufacturer Event of Default or termination or replacement of a Manufacturer Program;

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!