Road Markings Sample Clauses

Road Markings. Raised rib road markings shall be used in locations specified by the Highway Authority Engineer. When used there should be no gap within the line. Removal of Road Markings If road markings require removal, the process of removal shall be approved by the Highway Authority Engineer.
Sample 1Sample 2
AutoNDA by SimpleDocs
Road Markings. B5706 SETTING OUT THE ROAD MARKINGS Add the following: “Where road markings are to be replaced after milling/overlay seal, it is essential that all existing barrier lines and other road marking lines be accurately referenced before commencement of milling or other operations which will obliterate the existing road markings. The position of barrier lines shall be re-assessed on site by the Engineer before the Contractor commences with the road marking.” B5707 APPLYING THE PAINT Add the following: “The Contractor’s establishment on site and general obligation shall be deemed to fully include the establishment of the road-marking team, irrespective of the number of times the road- marking team is required to be onsite or is required to move within the site.” B5711 GENERAL Insert the following into the last sentence of the last paragraph between “black paint” and “or chemical paint remover”: “, bituminous emulsion, slurry” Add the following to the last paragraph: “Where black paint is used, it shall be matt.” Add the following new clause: “B5715 REMOVAL OF EXISTING ROAD STUDS The existing road studs shall be removed from the road surface prior to milling.” B5714 MEASUREMENT AND PAYMENT ITEM UNIT
Sample 1
Road Markings. (i) The Design shall ensure that all road markings shall be ‘extruded’ thermoplastic material.
Sample 1
Road Markings. All road markings shall be subjected to routine inspection at least once every year. These inspections shall be aimed at determining the extent of degradation of the markings due to: □ Normal wear and tear or damage; □ Spread due to movement of the road surface or plasticity of the material; □ Loss of colour; and □ Reduction in retro-reflective properties. Apart from subjective inspections of retro-reflective properties, all inspections shall be carried out in daylight conditions. In all cases where the level of degradation exceeds the limits set out in the Operation Manual corrective maintenance shall be undertaken within a period of six months.
Sample 1
Road Markings. Road marking with hot laid thermoplastic paint of approved quality shall be provided as per MORT&H Specifications /IRC Standards. The road/ traffic marking including kerb marking shall be provided as per IRC guidelines.
Sample 1

Related to Road Markings

  • Markings 4.8.1. Every hose shall bear, at intervals of not greater than 0.5 m, the following clearly legible and indelible identification markings consisting of characters, figures or symbols.

  • Training Materials Training Materials will be provided for each student. Training Materials may be used only for either (i) the individual student’s reference during Boeing provided training and for review thereafter or (ii) Customer’s provision of training to individuals directly employed by the Customer.

  • Patent Marking LICENSEE shall xxxx all Licensed Products made, used or sold under the terms of this Agreement, or their containers, in accordance with the applicable patent marking laws.

  • Alcohol Use Alcohol use is the consumption of any beverage, mixture or preparation including any medication containing alcohol.

  • Publicity and Use of Trademarks or Service Marks 34.1 A Party, its Affiliates, and their respective contractors and Agents, shall not use the other Party’s trademarks, service marks, logos or other proprietary trade dress, in connection with the sale of products or services, or in any advertising, press releases, publicity matters or other promotional materials, unless the other Party has given its written consent for such use, which consent the other Party may grant or withhold in its sole discretion.

  • Logo The Secretary [of Transportation] shall design a logo to be displayed by a facility designated under this section.’’ VENDING MACHINES; PLACEMENT IN REST, RECREATION, AND SAFETY REST AREAS; STATE OPERATION OF MA- CHINES Pub. L. 97–424, title I, § 111, Jan. 6, 1983, 96 Stat. 2106, provided that notwithstanding section 111 of this title before Oct. 1, 1983, any State could permit placement of vending machines in rest and recreation areas and in safety rest areas constructed or located on rights-of- way of National System of Interstate and Defense Highways [now Xxxxxx X. Xxxxxxxxxx System of Inter- state and Defense Highways] in such State. Such vend- ing machines could only dispense such food, drink, and other articles as the State highway department deter- mined were appropriate and desirable. Such vending machines could only be operated by the State. In per- mitting the placement of vending machines under this section, the State had to give priority to vending ma- chines which were operated through the State licensing agency designated pursuant to section 2(a)(5) of the Act of June 20, 1936, known as the Xxxxxxxx-Xxxxxxxx Act (20 U.S.C. 107a(a)(5)). DEMONSTRATION PROJECT FOR VENDING MACHINES IN REST AND RECREATION AREAS Pub. L. 95–599, title I, § 153, Nov. 6, 1978, 92 Stat. 2716, authorized Secretary of Transportation to implement a demonstration project respecting placement of vending machines in rest and recreation areas and to report not later than two years after Nov. 6, 1978, on results of such project. REVISION OF AGREEMENTS RELATING TO UTILIZATION OF SPACE ON RIGHTS-OF-WAY Pub. L. 87–61, title I, § 104(b), June 29, 1961, 75 Stat. 123, authorized Secretary of Commerce [now Transpor- tation], on application, to revise any agreement made prior to June 29, 1961, to extent that such agreement re- lates to utilization of space on rights-of-way on Na- tional System of Interstate and Defense Highways [now Xxxxxx X. Xxxxxxxxxx System of Interstate and De- fense Highways] to conform to section 111 of this title as amended by subsection (a). § 112. Letting of contracts

Time is Money Join Law Insider Premium to draft better contracts faster.