Submission of Design Documents Sample Clauses

Submission of Design Documents. The Engineer shall submit design documents to the Owner at intervals appropriate to the design process and Project schedule for purposes of evaluation. With regard to design, materials or systems, the Engineer shall be entitled to rely on approvals received in writing from the Owner in the further development of the design. Such submittals shall be prepared in the following intervals of the overall hours of design services incurred and invoiced: 1.11.1.5.1. 10% ‐ Schematic Design phase;
Sample 1Sample 2See All (5)
AutoNDA by SimpleDocs
Submission of Design Documents. Contractor shall submit to Owner, periodically through the date of Project Mechanical Completion, current complete copies of the Project Design Document list, and shall submit to Owner, within a reasonable time after the request therefor, each other document and drawing that Owner requires for the construction, operation and maintenance of the Contractor Facilities. If this Agreement is terminated prior to the Project Mechanical Completion Date, Contractor shall furnish Owner with any and all final documents which have been prepared, and the most up-to-date versions of documents which are not yet final.
Sample 1
Submission of Design Documents. 25.2.1 The Developer must prepare, develop and complete, or procure a relevant Contractor to prepare, develop and complete, the Design Documents and progressively submit them, together with all relevant supporting documentation, to Council: (a) on a regular basis, and in any event not less than on a monthly basis during the Design Development Program; (b) in sufficient time to allow Council 10 Business Days to review them; and (c) otherwise: (i) not used; and (ii) from time to time following any amendment to previous Design Documents (including amendments to Final Design Documents), including to take account of any: (A) alterations permitted, approved or required under clause 25.3 or 25.6; (B) Variations directed in a Variation Order; (C) a Developer Works Stage 1 Variation directed by Council under clause 35.2.4(a) or 35.2.4(b); or (D) a Developer Works Stage 1 Variation approved by Council under clause 35.3.1.
Sample 1
Submission of Design Documents. The Owner’s Representative shall review submittals of design documents appropriate to the design process and Project schedule for purposes of compliance with Owner’s submittal requirements for evaluation at the following intervals:
Sample 1

Related to Submission of Design Documents

  • Release of Design Plan The Engineer (1) will not release any roadway design plan created or collected under this contract except to its subproviders as necessary to complete the contract; (2) shall include a provision in all subcontracts which acknowledges the State’s ownership of the design plan and prohibits its use for any use other than the project identified in this contract; and (3) is responsible for any improper use of the design plan by its employees, officers, or subproviders, including costs, damages, or other liability resulting from improper use. Neither the Engineer nor any subprovider may charge a fee for the portion of the design plan created by the State.

  • Effect of Designation (i) If notice designating an Early Termination Date is given under Section 6(a) or (b), the Early Termination Date will occur on the date so designated, whether or not the relevant Event of Default or Termination Event is then continuing. (ii) Upon the occurrence or effective designation of an Early Termination Date, no further payments or deliveries under Section 2(a)(i) or 2(e) in respect of the Terminated Transactions will be required to be made, but without prejudice to the other provisions of this Agreement. The amount, if any, payable in respect of an Early Termination Date shall be determined pursuant to Section 6(e).

  • Schematic Design Documents In accordance with the approved Preliminary Design and Construction Schedule and based upon approval of and comments made by the Owner regarding the Concept Design Studies, the Design Professional shall prepare and submit to the Owner Schematic Design Documents, including drawings and outline specifications. These documents shall represent a further development of the approved design concept, providing additional detail and specificity regarding the intended design solution. Typically, all such documents shall be drawn to scale, indicating materials and assemblies, as appropriate, to convey the design intent and to illustrate the Project’s basic elements, scale and relationship to the Site. All major pieces of furniture and equipment to be fixed or supplied by the CM/GC shall be illustrated to scale. (See ASTM Standard Practice E 1804-02, August 2007, Sections 6.3, 8.2 and 8.3 for guidance on information which is generally developed in Schematic Design.)

  • Certificate of Designation The Certificate of Designation shall have been duly filed with the Secretary of State of the State of Delaware.

  • Certificate of Designations The Certificate of Designations shall have been filed with the Secretary of State of the State of Delaware.

  • Construction Documents Phase Bidding or Negotiation Phase:

  • Construction Documents The architectural and engineering documents setting forth the design for the Project prepared by the Design Professional. Construction Documents include, but are not limited to, the Specifications, the Drawings, the Supplementary Conditions, the General Conditions, and all Addenda.

  • Accuracy of Descriptions and Exhibits The information in the Pre-Pricing Prospectus and the Prospectus under the captions “Risk Factors—Tax Risks,” “Cash Distribution Policy and Restrictions on Distributions,” “Provisions of Our Partnership Agreement Relating to Cash Distributions,” “Business—Regulation of Operations,” “Business—Regulation of Environmental and Occupational Safety and Health Matters,” “Business—Legal Proceedings,” “Management,” “Certain Relationships and Related Party Transactions,” “Conflicts of Interest and Duties,” “Description of Our Common Units,” “Our Partnership Agreement” and “Material Federal Income Tax Consequences,” and the information in the Registration Statement under Items 14 and 15 of Part II, in each case to the extent that it constitutes summaries of statutes, rules or regulations, summaries of legal or governmental proceedings, summaries of provisions of the Amended and Restated Partnership Agreement, or summaries of the terms of the contracts and other documents described and filed, is correct in all material respects; and there are no franchises, contracts, indentures, mortgages, deeds of trust, loan or credit agreements, bonds, notes, debentures, evidences of indebtedness, leases or other instruments, agreements or documents that are required, under the 1933 Act and the 1933 Act Regulations, (i) to be described in the Registration Statement, the General Disclosure Package or the Prospectus or (ii) to be filed as exhibits to the Registration Statement, which have not been so described or filed as required under the 1933 Act and the 1933 Act Regulations. To the CONE Entities’ knowledge, no other party to any such contract or other document has any intention not to render full performance as contemplated by the terms thereof.

  • Accuracy of Descriptions The statements made in the Registration Statement, the General Disclosure Package and the Prospectus (including in each case, the documents incorporated by reference therein) under the captions “Description of Capital Shares” and “Certain Provisions of New York Law and Our Certificate of Incorporation,” insofar as they purport to constitute a summary of the terms of the Company’s common shares, under the caption “Description of the Notes,” insofar as it purports to constitute a summary of the terms of the Securities, and under the captions “Prospectus Supplement Summary— Company Overview; -- Distribution Policy; - Restrictions Relating to Our Common Shares; - Emerging Growth Company Status and The Offering,” “Risk Factors,” “Dividends and Distribution Policy,” “Description of Common Shares,” “Certain Provisions of New York Law and our Certificate of Incorporation and Bylaws,” and “Certain U.S. Federal Income Tax Considerations” insofar as such statements constitute summaries of the terms of statutes, rules or regulations, legal matters or governmental proceedings or agreements, contracts and other documents, are accurate and fair summaries of the terms of such statutes, rules or regulations, legal matters or governmental proceedings or agreements, contracts and other documents in all material respects. All agreements between the Company or any of its Subsidiaries and any other party expressly referenced in the Registration Statement, the General Disclosure Package and the Prospectus are legal, valid and binding obligations of the Company or such Subsidiary, as applicable, enforceable against the Company or such Subsidiaries, as applicable, as appropriate, in accordance with their respective terms, except to the extent that enforceability may be limited by bankruptcy, insolvency, reorganization, fraudulent transfer, moratorium or similar laws affecting creditors’ rights generally and by general equitable principles and, with respect to equitable relief, the discretion of the court before which any proceeding therefor may be brought (regardless of whether enforcement is sought in a proceeding at law or in equity) and, with respect to any indemnification provisions contained therein, except as rights under those provisions may be limited by applicable law or policies underlying such law. The Company’s operating policies, investment guidelines and other policies described in the Registration Statement, General Disclosure Package and Prospectus accurately reflect in all material respects the current intentions of the Company with respect to the operation of its business, and no material deviation from such guidelines or policies is currently contemplated.

  • Construction Document Phase 1.4.1 Based on the approved Design Development Documents, Guaranteed Maximum Price, coordinated models and any further adjustments in the scope or quality of the Project or in the Amount Available for the Construction Contract authorized by the Owner, the Architect/Engineer shall prepare, for approval by the Owner and review by the Construction Manager, Construction Documents consisting of Drawings, Schedules and Specifications derived from the model(s) in accordance with Owner’s written requirements setting forth in detail the requirements for construction of the Project, including, without limitation, the BIM Execution Plan and “Facility Design Guidelines”. The Plans, Drawings and Specifications for the entire Project shall be so prepared that same will call for the construction of the building and related facilities, together with its built-in permanent fixtures and equipment which will cost not more than the Guaranteed Maximum Price accepted by Owner, or the Amount Available for the Construction Contract established by Owner if no Guaranteed Maximum Price proposal has been accepted by Owner. The Architect/Engineer will be responsible for managing the design to stay within such Guaranteed Maximum Price proposal or Amount Available for the Construction Contract. The Architect/Engineer shall review the Construction Documents as they are being prepared at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Construction Documents. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.4.2 As a part of Construction Documents Phase, Architect/Engineer shall accomplish model coordination, aggregation and “clash detection” to remove conflicts in design between systems, structures and components. Architect/Engineer shall demonstrate and provide written assurance to Owner that all conflicts/collisions between models have been resolved. 1.4.3 The Architect/Engineer shall consult with the Owner and Construction Manager on matters such as construction phasing and scheduling, bid or proposal alternates, liquidated damages, the construction contract time period, and other construction issues appropriate for the Project. The Architect/Engineer shall assist the Owner and Construction Manager in the preparation of the necessary bidding information, bidding forms, RFP information, and RFP forms, and the Conditions of the Contract. 1.4.4 The Architect/Engineer shall assist the Owner in connection with the Owner’s responsibility and procedures for obtaining approval of all building and accessibility authorities having jurisdiction over the Project. 1.4.5 The Architect/Engineer shall provide coordination and inclusion of sequence of operations for all operable systems in the facility as defined by Owner during Design Development. 1.4.6 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.4.7 The Architect/Engineer shall participate in a final review of the Construction Documents and model(s) with the Owner and Construction Manager at the Project location or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Construction Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments. 1.4.8 Before proceeding into the Bidding and Proposal Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Construction Documents and approval of the Final Amount Available for the Construction Contract as approved by the Board of Regents.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!