Workmanship and Material Warranties Sample Clauses

Workmanship and Material Warranties. The following warranty and workmanship requirements apply to all repairs, modifications, and improvements that the Developer (its contractors or subcontractors) shall make prior to or during the course of the Construction project in order to accomplish the construction process. As used herein, “Applicable Warranty Period” means, with respect to any repair, modification, or improvement by the Developer hereunder, the time period that begins on the date repairs, modifications or improvements to Designated Roads are complete and ending on the date that is twelve (12) months after such completion date.
AutoNDA by SimpleDocs
Workmanship and Material Warranties a) OYA's engineering responsibility, including the selection of material and equipment suitable for the repair of, and modifications and improvements to, the Designated Roads and Non-Project Roads shall be carried out in accordance with generally accepted engineering practices, and OYA's construction responsibility shall be carried out in accordance with sound construction practices, subject to the provisions of Section 3.2. OYA shall require from its construction contractors and subcontractors the same standards of engineering and construction practice. OYA warrants that it shall perform and complete all repairs, modifications and improvements hereunder in a good and workmanlike manner. b) OYA warrants during the Applicable Warranty Period (as defined below) that all repairs, modifications and improvements hereunder shall be free from defects in material and workmanship. OYA shall remedy any defects in the repairs, modifications and improvements performed hereunder, workmanship, materials and equipment, including repairs, modifications and improvements, workmanship, materials and equipment provided by subcontractors, in accordance with Section
Workmanship and Material Warranties. (a) Contractor's engineering responsibility, including the specification and selection of material and equipment suitable for the facilities which are the subject of the Work under this Contract, shall be carried out in accordance with generally accepted engineering practice, and Contractor's construction responsibility shall be carried out in accordance with sound construction practice. Contractor shall require from its subcontractors the same standards of engineering practice and construction practice. All of Contractor's Work under this Contract shall be carried out in accordance with the Drawings to be prepared by Contractor under this Contract. (b) Notwithstanding Subsections 1.19(c) and 1.19(d), Contractor shall remedy any defects in the Work in accordance with Section 1.19.2 below, which appear within two (2) years from the date of Substantial Completion. A "defect" means any and all design, engineering, construction, manufacturing, installation, materials, equipment, Work, tools, or supplies which (i) does not conform to the terms of this Contract, (ii) fails to comply with the standards set forth in Section 1.19.1(a), (iii) is not of specified quality, (or of equal quality for all intended purposes), (iv) is of improper or inferior workmanship, or (v) is not suitable for use under the applicable climatic and range of operating conditions.
Workmanship and Material Warranties i. Developer’s engineering responsibility, including selection of material and equipment suitable for the repair of, and modifications and improvements to, the Roads, Right of Ways and Non-Project Roads (if applicable) shall be carried out in accordance with generally accepted engineering practices. Developer warrants that it shall perform and complete all repairs, modifications and improvements hereunder in a good and workmanlike manner and free of liens. ii. Developer further warrants that all repairs, modifications and improvements shall be free from defects in material and workmanship. Developer will remedy any defects in the repairs, modifications and improvements performed pursuant to this Agreement whether performed by Developer or its Representatives which are discovered during the Applicable Warranty Period. A “defect” means any and all design, engineering, construction, manufacturing, installation, materials, equipment, repairs, modifications or improvements which (i) does not conform to the terms of this Agreement or (ii) fails to comply with the standards set forth in Section 6(C)(i). As used herein, “Applicable Warranty Period” means 12 months following the completion of any repair, modification or improvement of any existing County asset by Developer or its Representatives, or 24 months for any new bridge constructed, repaired, improved or installed by Developer or its Representatives.

Related to Workmanship and Material Warranties

  • WORKMANSHIP AND MATERIALS 1.10.1 Contractor shall furnish all supervision, labor, transportation, materials, tools and equipment necessary to satisfactorily complete the service in a manner consistent with the Project Manager’s plan and schedule. Contractor’s equipment shall be of the size and type appropriate for completing the various types of work described in the contract or any associating Purchase Order. Contractor shall ensure that any equipment considered by the Project Manager to be improper or inadequate for this purpose is removed from the site and replaced with satisfactory equipment. 1.10.2 All work performed under this contract shall be completed in accordance with local, state, and national codes and standards, and other recognized industry standards associated with the work. 1.10.3 The Contractor guarantees that all materials shall be of the best quality, that all work shall be done in a professional manner, and that all aspects of the project will be delivered in good working order, complete and perfect in every respect, and that all systems and materials necessary to make the project completely operational as contemplated by the above description of the project, even if those systems and materials are not specifically described in this Contract, shall be included in the contract price. 1.10.4 Contractor shall ensure that all supplies, equipment and machines shall be kept free of traffic lanes or other areas that may be hazardous. Contractor shall further ensure that all dirt and debris resulting from the work under this contract shall be disposed of at the end of each day or at the completion of work in each building. 1.10.5 Contractor shall, at no additional cost to the State, repair furnishings, equipment, facilities or other property of the State damaged by Contractor, its officers, employees, agents, contractors, subcontractors and invitees. Contractor acknowledges that the determination of the need for, and extent of, any repair work shall be made at the sole discretion of the Project Manager.

  • Quality of Materials and workmanship The Contractor shall ensure that the Construction, Materials and workmanship are in accordance with the requirements specified in this Agreement, Specifications and Standards and Good Industry Practice.

  • Workmanship Warranty Contract warrants that all components or deliverables specified and furnished by or through Contractor under the Project Definition/Work Order meet the completion criteria set forth in the Project Definition/Work Order and any subsequent statement(s) of work, and that services will be provided in a workmanlike manner in accordance with industry standards.

  • MATERIALS AND WORKMANSHIP (a) All equipment, material, and articles incorporated into the work covered by this Agreement shall be new and of the most suitable grade for the purpose intended, unless otherwise specifically provided in this Agreement. (b) Seller shall obtain Company approval of the machinery and mechanical and other equipment to be incorporated into the work. When required by Company, Seller shall also obtain Company's approval of the material or articles which Seller contemplates incorporating into the work. When so directed, Seller shall submit samples for approval at Seller's expense. Machinery, equipment, material, and articles that do not have the required approval shall be installed or used at the risk of subsequent rejection. (c) References in the specifications or drawings to equipment, material, articles, or patented processes by trade name, make, or catalog number, shall be regarded as establishing a standard of quality and shall not be construed as limiting competition. Seller may, with Company's written approval, use any equipment, material, article, or process that is equal to that specified, unless the words "No Substitution" follow the listing of the item in the specifications or drawings. Unless otherwise agreed, modifications due to use of “or equal” supplies, is at Seller’s expense. (d) All work under this Agreement shall be performed in a skillful and workmanlike manner. Company may require, in writing, Seller to remove from the work any employee Company deems incompetent, careless, or otherwise objectionable.

  • Supplier Warranties The warranties made by Supplier with respect to each Product are solely those that are contained in the product insert accompanying such Product. No other affirmation of fact or promise made by Distributor or its Suppliers, whether or not in this Agreement, by words or action shall constitute a warranty. The foregoing warranty does not extend to any Product that is modified or altered, or treated with abuse, negligence or other improper treatment. Standard Limited Warranty. Distributor shall pass on to Subdistributor so that it may pass on to the customers the Supplier’s standard limited warranty for Products, including limitations set for in subsection (b) Limitation of Liability and Warranty below. Except for the stated warranty set forth on, or included with, the Products as delivered to the Subdistributor and /or its customers, the warranty and remedy set forth in this 0 are exclusive and all other warranties, guarantees or representations, express or implied, by Distributor’s Suppliers with respect to the applicable Products, including, without limitation, warranties of merchantability and fitness for particular purpose, and any other obligation or liability of Distributor and its Suppliers to Subdistributor or to any third party with respect to the Products, are hereby excluded. This warranty is contingent upon proper use of a Product in the application for which such Product was intended and does not cover Products that were modified without Distributor or its Supplier’s prior written approval, that have expired or that were subjected to physical, chemical or electrical stress that the products were not originally designed for.

  • Contractor Warranties 7.12.1 If and to the extent Developer obtains general or limited warranties from any Contractor in favor of Developer with respect to design, materials, workmanship, equipment, tools, supplies, software or services, Developer also shall cause such warranty to be expressly extended to TxDOT and any third parties for whom Work is being performed or equipment, tools, supplies or software is being supplied by such Contractor; provided that the foregoing requirement shall not apply to standard, pre-specified manufacturer warranties of mass- marketed materials, products (including software products), equipment or supplies where the warranty cannot be extended to TxDOT using commercially reasonable efforts. TxDOT agrees to forebear from exercising remedies under any such warranty so long as Developer or a Lender is diligently pursuing remedies thereunder. To the extent that any Contractor warranty would be voided by reason of Developer's negligence in incorporating material or equipment into the Work, Developer shall be responsible for correcting such defect. 7.12.2 Contractor warranties (if any) are in addition to all rights and remedies available under the CDA Documents or applicable Law or in equity, and shall not limit Developer’s liability or responsibility imposed by the CDA Documents or applicable Law or in equity with respect to the Work, including liability for design Defects, latent construction Defects, strict liability, breach, negligence, willful misconduct or fraud.

  • Manufacturer Warranties Prior to the transfer to the Interconnected Transmission Owner of title to the Transmission Owner Interconnection Facilities built by the Interconnection Customer, the Interconnection Customer shall produce documentation satisfactory to the Interconnected Transmission Owner evidencing the transfer to the Interconnected Transmission Owner of all manufacturer warranties for equipment and/or materials purchased by the Interconnection Customer for use and/or installation as part of the Transmission Owner Interconnection Facilities built by the Interconnection Customer.

  • Manufacturer’s Warranties If a Lease Vehicle is covered by a Manufacturer’s warranty, the Lessee, during the Vehicle Term for such Lease Vehicle, shall have the right to make any claims under such warranty that the Lessor could make.

  • Workmanship All work under this Agreement shall be performed in a safe manner to a professional standard. The goal of performance under this Agreement is the suppression of wildland fire and other emergency incident responses. The Incident Commander may release from an incident assignment any Contractor employee deemed incompetent, careless, or otherwise objectionable including violation of Harassment Free Workplace Policy. It will be left to the discretion of the Incident Commander to demobilize an entire resource or to allow replacement of the noncompliant personnel. Documentation of the rationale for release will be provided to the CO subsequent to the action. Accordingly, the Contracting Officer may require, in writing, the Contractor remove from use under this Agreement, any employee found incompetent, careless, or otherwise objectionable including violation of Harassment Free Workplace Policy. The Contracting Officer may require other proof of mitigation. Misconduct may result in cancellation of this Agreement. If an employee or crew is terminated, quits, or otherwise is released from the incident for any reason, the Contractor is responsible for returning the employee(s) to the point of hire with a departure time from the Incident Command Post (ICP) no later than 12 hours or time specified by a government official following such decision. The Contractor may, at their discretion, provide such transportation, or request the Incident Management Team (IMT) to arrange for the transportation with all transportation costs deducted from Contractor's payment. If the Contractor does not act in a timely manner (i.e., Contractor's employee(s) not departing from the ICP for return to point of hire within the specified time period), the IMT has authority to transport said employee or arrange for employee's transportation and to deduct all such transportation costs from Contractor's payment.

  • MARKETING MATERIALS AND REPRESENTATIONS (a) The Participant represents and warrants that it will not make any representations concerning a Fund, Creation Units or Shares, other than those consistent with the Prospectus or any Marketing Materials (as defined below) furnished to the Participant by the Distributor. (b) The Participant agrees not to furnish, or cause to be furnished by it or its employees, to any person, or to display or publish, any information or materials relating to a Fund or the Shares, including, without limitation, promotional materials and sales literature, advertisements, press releases, announcements, statements, posters, signs or other similar materials (“Marketing Materials”), unless (i) such Marketing Materials: (a) are either furnished to the Participant by the Distributor, or (b) if prepared by the Participant, are consistent in all material respects with the Prospectus, and clearly indicate that such Marketing Materials are prepared and distributed by the Participant, and (ii) Participant and such Marketing Materials prepared by the Participant comply with applicable FINRA rules and regulations. The Participant shall file all such Marketing Materials that it prepares with FINRA, if required by applicable laws, rules or regulations. (c) The Trust represents and warrants that (i) the Prospectus is effective, no stop order of the SEC has been issued, no proceedings for such purpose have been instituted or, to its knowledge, are being contemplated; (ii) the Prospectus conforms in all material respects to the requirements of all applicable law, and the rules and regulations of the SEC thereunder and does not and will not contain an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein, in light of the circumstances under which they were made, not misleading; (iii) the Shares, when issued and delivered against payment of consideration thereof, as provided in this Agreement, will be duly and validly authorized, issued, fully paid and non-assessable and free of statutory and contractual preemptive rights, rights of first refusal and similar rights; (iv) no consent, approval, authorization, order, registration or qualification of or with any court or governmental agency or body is required for the issuance and sale of the Shares, except the registration of the Shares under the 1933 Act; (v) Shares will be approved for listing on a national exchange; (vi) it will not lend Fund securities pursuant to any securities lending arrangement that would prevent the Trust from settling a Redemption Order when due; (vii) any and all Marketing Materials prepared by the Trust and provided to the Participant in connection with the offer and sale of Shares shall comply with applicable law, including without limitation, the provisions of the 1933 Act and the rules and regulations thereunder and applicable requirements of FINRA, and will not contain any untrue statement of a material fact related to a Fund or the Shares or omit to state therein a material fact required to be stated therein or necessary to make the statements therein not misleading; and (viii) it will not name the Participant in the Prospectus, Marketing Materials, or on the Fund’s website without the prior written consent of Participant, unless such naming is required by law, rule, or regulation. (d) Notwithstanding anything to the contrary in this Agreement, the term Marketing Materials shall not include (i) written materials of any kind that generally mention a Fund without recommending the Fund (including in connection with a list of products sold through Participant or in the context of asset allocations), (ii) materials prepared and used for the Participant’s internal use only, (iii) brokerage communications, including correspondence and institutional communications, as defined under FINRA rules, prepared by the Participant in the normal course of its business, and (iv) research reports; provided, however, that any such materials prepared by Participant comply with applicable FINRA rules and regulations and other applicable laws, rules and regulations.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!