Xxxxxxx Xxxxx Remedial Action Plan or RAP Modification Plan Sample Clauses

Xxxxxxx Xxxxx Remedial Action Plan or RAP Modification Plan. [Per Plan]. This pay item is used for a soil source removal or greater than 200 cubic yards without dewatering design or geotechnical design. The report is also used for modifications such as a limited pumping event which includes on-site treatment and disposal of recovered water or short term intermittent episodic remediation with mobile sparging/SVE system or multi-phase extraction equipment. The report includes updated maps and design drawings. The report must be signed and sealed by a registered P.E. REMAINDER OF XXXX INTENTIONALLY LEFT BLANK
AutoNDA by SimpleDocs
Xxxxxxx Xxxxx Remedial Action Plan or RAP Modification Plan. [Per Plan]. This pay item is used for short term remediation of either a single event or multiple episodic events with portable remediation equipment which does not involve an on-site treatment process for recovered water or air emissions. The use of the report is generally limited to short-term or episodic biosparging with mobile equipment or short-term groundwater recovery which meets the requirements for interim source removal of Rule 62-780.300(2) where the site could achieve NFA or qualify for Remediation by Natural Attenuation; or modifications that involve mainly minor system changes such as addition of a recovery well/sparging well to an existing system with that technology, or adding a treatment process to an existing system which involves one or two items. The report includes updated maps and design drawings. The report must be signed and sealed by a registered X.X.
Xxxxxxx Xxxxx Remedial Action Plan or RAP Modification Plan. [Per Plan]. This pay item is used for a soil source removal of greater than 200 cubic yards with dewatering design or geotechnical design, and for large diameter auger soil source removal design. This template is also used for bioremediation or chemical oxidation RAPs. The report must compare the conceptual designs and costs of at least three bioremediation or chemical oxidation vendors and recommend detail design of one based on cost-effectiveness. The report includes all appropriate tables, figures, maps and construction drawings. Although the specific design details may be recommended by a vendor, the preapproval contractor’s P.E. must certify that the design is their own responsibility and the implementation of the design will provide a reasonable assurance of performing complete site rehabilitation in accordance with 62-780, F.A.C. The report must be signed and sealed by a registered X.X.

Related to Xxxxxxx Xxxxx Remedial Action Plan or RAP Modification Plan

  • Remedial Action Plan (if applicable) Provide a detailed description of Xxxxxx's course of action and plan to achieve the missed Construction Milestones and all subsequent Construction Milestones by the Guaranteed Commercial Operation Date using the outline provided below.

  • Please see the current Washtenaw Community College catalog for up-to-date program requirements Secondary / Post-Secondary Program Alignment Welding HIGH SCHOOL COURSE SEQUENCE 9th Grade 10th Grade 11th Grade 12th Grade English 9 Algebra I World History/Geography Biology World Language Phys Ed/Health English 10 Geometry U.S. History/Geography Physics or Chemistry World Language Visual/Performing/Applied Arts English 11 Algebra II Civics/Economics Welding English 12 Math Credit Science Credit Welding WASHTENAW COMMUNITY COLLEGE Welding Associate in Applied Science Semester 1 Math Elective(s)* 3 WAF 105 Introduction to Welding Processes 2 WAF 111 Oxy-fuel Welding 4 WAF 112 Shielded Metal Arc Welding 4 Semester Total 13 Semester 2 Speech Elective(s) 3 WAF 106 Blueprint Reading for Welders 3 WAF 123 Advanced Oxy-fuel Welding 4 WAF 124 Advanced Shielded Metal Arc Welding 4 Semester Total 14 Semester 3 Arts/Human. Elective(s) 3 Computer Lit. Elective(s) 3 WAF 215 Advanced Gas Tungsten Arc Welding 4 WAF 288 Gas Metal Arc Welding 4 Semester Total 14 Semester 4 WAF 200 Layout Theory Welding 3 WAF 210 Welding Metallurgy 3 Soc. Sci. Elective(s) 3 WAF 226 Specialized Welding Procedures 4 Semester Total 13 Semester 5 Nat. Sci. Elective(s) 4 WAF 227 Basic Fabrication 3 WAF 229 Shape Cutting Operations 3 Writing Elective(s) 3 Semester Total 13 Program Totals 67

  • Retainage for Unacceptable Corrective Action Plan or Plan Failure If the corrective action plan is unacceptable to the Department or Customer, or implementation of the plan fails to remedy the performance deficiencies, the Department or Customer will retain ten percent (10%) of the total invoice amount. The retainage will be withheld until the Contractor resolves the performance deficiencies. If the performance deficiencies are resolved, the Contractor may invoice the Department or Customer for the retained amount. If the Contractor fails to resolve the performance deficiencies, the retained amount will be forfeited to compensate the Department or Customer for the performance deficiencies.

  • Remediation Plan If deficiencies or weaknesses are cited on the evaluation form, the evaluator, working with the evaluatee, shall develop a written remediation plan for the purpose of assisting the evaluatee to improve. The remedial action plan shall be attached to the evaluation document and shall contain:

  • Corrective Action Plan Within fifteen (15) Business Days following the establishment of the Joint Remediation Committee, the Purchasers, in consultation with the Sellers, shall prepare and submit to the Joint Remediation Committee an initial draft of the Corrective Action Plan. The parties shall work in good faith through the Joint Remediation Committee to finalize the Corrective Action Plan within fifteen (15) Business Days of the Purchasers’ submission of the initial draft of the Correct Action Plan. At the end of such period, if the Sellers reasonably determine that the Corrective Action Plan proposed by the Purchasers (as may be modified over the course of such period) would not reasonably be expected to satisfactorily address the Major Default, then the Sellers may escalate the issue to the Head of Commercial Capital (or equivalent leader of any successor business unit) of the Seller Group and the Chief Executive Officer of the Bank Assets Purchaser (the “Senior Executives”) and the Senior Executives shall work collaboratively (including with the Joint Remediation Committee) to develop a mutually agreeable Corrective Action Plan within fifteen (15) Business Days.

  • Proposal of Corrective Action Plan In addition to the processes set forth in the Contract (e.g., service level agreements), if the Department or Customer determines that there is a performance deficiency that requires correction by the Contractor, then the Department or Customer will notify the Contractor. The correction must be made within a time-frame specified by the Department or Customer. The Contractor must provide the Department or Customer with a corrective action plan describing how the Contractor will address all performance deficiencies identified by the Department or Customer.

  • Action Plan (1) Within thirty (30) days, the Board shall adopt, implement, and thereafter ensure Bank adherence to a written action plan detailing the Board's assessment of what needs to be done to address the regulatory recommendations outlined in the Report of Examination (XXX) and the requirements of this Agreement to improve the Bank, specifying how the Board will implement the plan, and setting forth a timetable for the implementation of the plan.

  • Reportable Events Involving the Xxxxx Law Notwithstanding the reporting requirements outlined above, any Reportable Event that involves solely a probable violation of section 1877 of the Social Security Act, 42 U.S.C. §1395nn (the Xxxxx Law) should be submitted by Practitioner to CMS through the self-referral disclosure protocol (SRDP), with a copy to the OIG. If Practitioner identifies a probable violation of the Xxxxx Law and repays the applicable Overpayment directly to the CMS contractor, then Practitioner is not required by this Section III.G to submit the Reportable Event to CMS through the SRDP.

  • Sale of Note; Change of Loan Servicer; Notice of Grievance The Note or a partial interest in the Note (together with this Security Instrument) can be sold one or more times without prior notice to Borrower. A sale might result in a change in the entity (known as the “Loan Servicer”) that collects Periodic Payments due under the Note and this Security Instrument and performs other mortgage loan servicing obligations under the Note, this Security Instrument, and Applicable Law. There also might be one or more changes of the Loan Servicer unrelated to a sale of the Note. If there is a change of the Loan Servicer, Borrower will be given written notice of the change which will state the name and address of the new Loan Servicer, the address to which payments should be made and any other information RESPA requires in connection with a notice of transfer of servicing. If the Note is sold and thereafter the Loan is serviced by a Loan Servicer other than the purchaser of the Note, the mortgage loan servicing obligations to Borrower will remain with the Loan Servicer or be transferred to a successor Loan Servicer and are not assumed by the Note purchaser unless otherwise provided by the Note purchaser. Neither Borrower nor Lender may commence, join, or be joined to any judicial action (as either an individual litigant or the member of a class) that arises from the other party’s actions pursuant to this Security Instrument or that alleges that the other party has breached any provision of, or any duty owed by reason of, this Security Instrument, until such Borrower or Lender has notified the other party (with such notice given in compliance with the requirements of Section 15) of such alleged breach and afforded the other party hereto a reasonable period after the giving of such notice to take corrective action. If Applicable Law provides a time period which must elapse before certain action can be taken, that time period will be deemed to be reasonable for purposes of this paragraph. The notice of acceleration and opportunity to cure given to Borrower pursuant to Section 22 and the notice of acceleration given to Borrower pursuant to Section 18 shall be deemed to satisfy the notice and opportunity to take corrective action provisions of this Section 20.

  • CFR Part 200 or Federal Provision - Xxxx Anti-Lobbying Amendment - Continued If you answered "No, Vendor does not certify - Lobbying to Report" to the above attribute question, you must download, read, execute, and upload the attachment entitled "Disclosure of Lobbying Activities - Standard Form - LLL", as instructed, to report the lobbying activities you performed or paid others to perform. 2 CFR Part 200 or Federal Provision - Federal Rule Compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). (Contracts, subcontracts, and subgrants of amounts in excess of $100,000) Pursuant to the above, when federal funds are expended by ESC Region 8 and TIPS Members, ESC Region 8 and TIPS Members requires the proposer certify that in performance of the contracts, subcontracts, and subgrants of amounts in excess of $250,000, the vendor will be in compliance with all applicable standards, orders, or requirements issued under section 306 of the Clean Air Act (42 U.S.C. 1857(h)), section 508 of the Clean Water Act (33 U.S.C. 1368), Executive Order 11738, and Environmental Protection Agency regulations (40 CFR part 15). Does vendor certify compliance? Yes

Time is Money Join Law Insider Premium to draft better contracts faster.