Installation Drawings definition

Installation Drawings. ’ means the drawings, prepared by the contractor for approval by the consulting engineer, which show details of the contractor’s proposals for the execution of the engineering system;
Sample 1
Installation Drawings means those drawings used by the Contractor for installation purposes which show the setting out detail and the overall integration of the Works with the work of the Civil Infrastructure Contractors and Designated Contractors.
Sample 1
Installation Drawings means a drawing based on the detailed design or coordination drawing with the primary purpose of defining that information needed by the tradesmen on site to install the works. The main features of installation drawings shall be as follows:- • Plan layouts shall be to a scale of at least 1:50 and be accompanied by cross-sections to a scale of at least 1:20 for all congested areas.• The drawing shall be spatially co-ordinated, i.e. there shall be no physical clashes between the system components when installed at the scaled-off positions shown on the drawings• Allowances shall be made, and shown on the drawings, for inclusion of all supports and fixings necessary to installed the works• The spaces between pipe and ducts runs shown on the drawings shall make allowance for the service at its widest point. Insulation, standard fitting dimensions and joint widths shall therefore have been allowed for on the drawings.• The drawing shall make allowances for installation detail provided from shop drawings.• The drawings shall make allowances for installation working space, space to facilitate commissioning and space to allow on-going operation and maintenance in accordance with the relevant health and safety requirements.• Allowances shall be made for plant and equipment including those that are chose as alternatives to the designer’s specified option.• Dimensions shall be provided where the positioning of the services is considered shall be important enough not to leave to the tradesman on site.• Plant room layouts shall be to a scale of at least 1:20 and be accompanied by cross sections and elevations to a scale 1:20.• All conduit routes and sizes shall be shown whether surface mounted or buried within the building fabric.
Sample 1

Examples of Installation Drawings in a sentence

  • Layout and Installation Drawings shall be completed by the Contractor in accordance with the approved schedule.

  • Shipboard Installation Drawings (SIDS) will be utilized in the development, acquisition, and cataloging AIT/SCD supportability material and tooling.

  • As applicable, the following types of data will be required: • Fabrication, Erection/ Placement Details:- Laying plans for large diameter pipelines- Drawings, lists and schedules for special structures • Outline, Dimension, Assembly and Installation Drawings- Terminal connection diagrams for all electrical power and lighting, and for all types of instrumentation and control circuits.

  • CLIN 0005 (1005-9005) - Develop LCS Freedom CS Space Arrangement Drawings, CS Installation and Interface Control Drawings, in accordance with Paragraph 3.4: The Contractor shall review, develop, update, and modify the CS Space Arrangements, CS Installation Drawings, and CS Interface Controls Drawings, which includes CS Topside and below deck.

  • Duties include verifying that the Ship Installation Drawings are accurate and reflect the guidance provided from the Technical Data Package.

  • CLIN 0006 (1006-9006) - Develop LCS Independence CS Space Arrangement Drawings, CS Installation and Interface Control Drawings, in accordance with Paragraph 3.4: The Contractor shall review, develop, update, and modify the CS Space Arrangements, CS Installation Drawings, CS Interface Controls Drawings, and Ship Installation Drawings (SIDs), which includes CS Topside and below deck.

  • Design report, Low voltage power balance calculation note, Main switch board schematic diagram, Lighting schematic diagrams, Earthing and bonding system schematic diagrams, Preliminary BOQ and equipment schedule, Typical Installation Drawings, Calculation notes for low voltage (station electrical loads, short circuit, cables, lighting…), Schematic diagrams, Main switch board schematic diagram,Distribution boards schematic diagrams.

  • Layout and Installation Drawings, submitted for review by the RIOC/LiRo PM, shall include all utilities, structures, equipment, pipes, valves, fittings, drains, ventilation ducts, all electrical, heating, ventilating and other conduits, electrical cable trays, lighting fixture layouts and circuiting, instrumentation, power supply, alarm circuits, etc., under this Contract.

  • CS Installation and Interface Control Drawings, in accordance with Paragraph 3.4: The Contractor shall review, develop, and provide recommendations as necessary to the new CS Space Arrangements, CS Installation Drawings, CS Interface Controls Drawings, and Ship Installation Drawings (SIDs), which includes CS Topside and below deck.

  • Duties include initiating LARs to request the Planning Yard to develop Ship Installation Drawings, review LARs from the Planning Yard requesting system information for interfacing alterations and responding accordingly.


More Definitions of Installation Drawings

Installation Drawings means drawings, prepared by the Contractor for approval by the Consulting Engineer, which show details of the Contractor's proposals for the execution of the Engineering Systems.
Sample 1

Related to Installation Drawings

  • Construction Drawings means those drawings containing the technical details associated with the design, construction and installation of the Infrastructure;

  • Contract Drawings means only those drawings specifically entitled as such and listed in the Specifications or in any Addendum, or any drawings furnished by the Commissioner, pertaining or supplemental thereto.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Working Drawings means the final working drawings approved by Landlord, as amended from time to time by any approved changes thereto, and “Work” means all improvements to be constructed in accordance with and as indicated on the Working Drawings, together with any work required by governmental authorities to be made to other areas of the Building as a result of the improvements indicated by the Working Drawings. Landlord’s approval of the Working Drawings shall not be a representation or warranty of Landlord that such drawings are adequate for any use or comply with any Law, but shall merely be the consent of Landlord thereto. Tenant shall, at Landlord’s request, sign the Working Drawings to evidence its review and approval thereof. After the Working Drawings have been approved, Tenant shall cause the Work to be performed in accordance with the Working Drawings.

  • As-built drawings, as used in this clause, means drawings submitted by the Contractor or subcontractor at any tier to show the construction of a particular structure or work as actually completed under the contract. “As-built drawings” shall be synonymous with “Record

  • Shop Drawings means drawings, submitted to the PHA by the Contractor, subcontractor, or any lower tier subcontractor, showing in detail (1) the proposed fabrication and assembly of structural elements and (2) the installation (i.e., form, fit, and attachment details) of materials of equipment. It includes drawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance and test data, and similar materials furnished by the Contractor to explain in detail specific portions of the work required by the contract. The PHA may duplicate, use, and disclose in any manner and for any purpose shop drawings delivered under this contract.

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • Installation Works means, as the context so requires,

  • Tenant Improvements Defined in Exhibit B, if any.

  • Shop Drawing means any and all drawings, diagrams, layouts, explanations, illustrations, manufacturer's drawings or other written or graphic materials which illustrate any portion of the construction work.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Installation Site means the site at which the Product is originally installed.

  • Space Plan means the space plan to be prepared by Tenant in accordance with paragraph 2 below and approved by Landlord and Tenant, and showing the general configuration of the Tenant Improvements.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Tenant Improvement Allowance in the maximum amount of $200.00 per rentable square foot in the Premises, which is included in the Base Rent set forth in the Lease; and

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Telecommunications Equipment means equipment, other than Customer Premises Equipment, used by a Carrier to provide Telecommunications Services, and include software integral to such equipment, including upgrades.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • Installation Fee means charges payable by the Customer for the installation of the service as provided in the Order Form;

  • electrical installation means an electrical installation as defined in the Regulations;

  • New Work means any Services/Deliverables outside the scope of the Contract and not specifically provided under any Statement of Work, that once added will result in the need to provide the Contractor with additional consideration.

  • piece-work means any system by which earnings are calculated upon the quantity or output of work performed;

  • The DRAWINGS / MAPS means the drawing/map or drawings/maps mentioned in NIT and any modifications of them approved by the Employer or any further Working drawings/maps or sketches by the Employer or any further working drawings/maps or sketches which may be furnished or approved in writing by the Employer.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;