Tier 1 Evaluation definition

Tier 1 Evaluation means an evaluation by an Engineer in accordance with Chapters 2.0 and 3.0 of ASCE/SEI 31. A Tier 1 Evaluation must include the appropriate Structural, Nonstructural and Geologic Site Hazards and Foundation Checklists.
Tier 1 Evaluation means an evaluation by an Engineer in accordance with Chapters 2.0 and 3.0 of ASCE/SEI 31. A Tier
Tier 1 Evaluation means a comparison of CoC exposure point concentrations in soil or sediment with chemical-specific TRGs for the evaluation of human health and environmental impacts and an evaluation of ecological impacts through completion of an Ecological Checklist. Ecological evaluations are used to determine whether ecological receptors of concern are present and may include, but are not limited to, the collection of field observation data for any readily apparent harm on the ecological receptors of concern.

Examples of Tier 1 Evaluation in a sentence

  • A Tier 1 Evaluation must include the appropriate Structural, Nonstructural and Geologic Site Hazards and Foundation Checklists.

  • Each of the evaluation statements on this checklist shall be marked compliant (C), non-compliant (NC), or not applicable (N/A) for a Tier 1 Evaluation.

  • Tier 1 Evaluation Procedures (1) The basic methodology for a Tier 1 Evaluation shall be the comparison of the highest concentration of each contaminant in each media to the TRGs provided in the Tier 1 TRG table.

  • A Tier 1 Evaluation must include the appropriate Structural, Nonstructural and Geologic Site Hazards and Foundation Checklists.· “Tier 2 Evaluation” means an evaluation by an Engineer in accordance with Chapter 4.0 of ASCE/SEI 31.

  • Additional Site Assessment may be required to fully evaluate the current and future exposure pathways identified in the Tier 1 Evaluation.

  • The submission must include the checklists and backup calculations from the Tier 1 Evaluation.

  • If the exposure point concentrations (see Tier 1 Evaluation for an explanation of the representative concentrations) of the CoCs are below the RBSLs, further assessment and/or cleanup is not necessary (see No Further Action Decisions).

  • For a Tier 1 Evaluation, the following default values may beassumed: f' c of 3000 psi for concrete, Fy of 40 ksifor reinforcing steel, Fy of 36 ksi for structural steel, f'm of 1500 psi for masonry.

  • Prior to conducting a Tier 1 Evaluation, all available documents shall be collected and reviewed.

  • Tier 2 Evaluation Options (1) Tier 2 Evaluation is a more in-depth evaluation of site-specific conditions beyond the Tier 1 Evaluation methodology.


More Definitions of Tier 1 Evaluation

Tier 1 Evaluation means an evaluation by an Engineer in accordance with Chapters

Related to Tier 1 Evaluation

  • Clinical evaluation means a systematic and planned process to continuously generate, collect, analyse and assess the clinical data pertaining to a device in order to verify the safety and performance, including clinical benefits, of the device when used as intended by the manufacturer;

  • Site evaluation means a comprehensive analysis of soil and site conditions for an OWTS.

  • Performance evaluation means evaluation of work and program participation as well as other areas of behavior.

  • Tier 1 Help Desk means Customer's point of contact(s) to provide all Tier 1 Support within Customer's organization(s).

  • Tier 3 Wire Centers are those Embarq Wire Centers that are not Tier 1 or Tier 2 Wire Centers.

  • Summative evaluation means the comprehensive, end-of-cycle appraisal and shall incorporate the results of the minimum required observations, any additional observations, and required component-level data. At the discretion of the Evaluator, it may also include additional announced or unannounced observation data beyond the required observation data provided by other Credentialed Observers.

  • Tier 1 Support means the Technical Support provided by the Tier 1 Help Desk.

  • Tier 1 means the portion of the design-related information contained in the generic DCD that is approved and certified by this appendix (Tier 1 information). The design descriptions, interface requirements, and site parameters are derived from Tier 2 information. Tier 1 information includes:

  • Tier 1 Capital means Additional Tier 1 Capital or any item that qualifies as common equity tier 1 capital pursuant to National Regulations.

  • Independent educational evaluation means an evaluation conducted by a qualified examiner who is not employed by the public agency responsible for the education of the child in question.

  • Tier 2 means the portion of the design- related information contained in the generic DCD that is approved but not certified by this appendix (Tier 2 information). Compli- ance with Tier 2 is required, but generic changes to and plant-specific departures from Tier 2 are governed by Section VIII of this appendix. Compliance with Tier 2 pro- vides a sufficient, but not the only accept- able, method for complying with Tier 1. Compliance methods differing from Tier 2 must satisfy the change process in Section VIII of this appendix. Regardless of these dif- ferences, an applicant or licensee must meet the requirement in Section III.B of this ap- pendix to reference Tier 2 when referencing Tier 1. Tier 2 information includes:

  • Annual summative evaluation rating means an annual evaluation rating that is based on appraisals of educator practice and student performance, and includes all measures captured in a teacher’s evaluation rubric. The four summative performance categories are ineffective, partially effective, effective, and highly effective.

  • Baseline means the “Initial Small Business Lending Baseline” set forth on the Initial Supplemental Report (as defined in the Definitive Agreement), subject to adjustment pursuant to Section 3(a).

  • Tier 2 Support means the Esri Technical Support provided to the Tier 1 Help Desk when a Case cannot be resolved through Tier 1 Support.

  • Tier 2 Capital has the meaning given to the term “Tier 2 capital” in 12 C.F.R. Part 217, as amended, modified and supplemented and in effect from time to time or any replacement thereof.

  • Evaluation Criteria means the criteria set out under the clause 27 (Evaluation Process) of this Part C, which includes the Qualifying Criteria, Functional Criteria and Price and Preferential Points Assessment.

  • Baseline actual emissions means the rate of emissions, in tons per year, of a regulated new source review (NSR) pollutant, as determined in accordance with Parts (A) through (C) of this Subparagraph:

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • H1, H2 etc means First Highest, Second Highest Offers etc. in Disposal Tenders means

  • Clinical review criteria means the written screening procedures, decision abstracts, clinical protocols, and practice guidelines used by a health carrier to determine the necessity and appropriateness of health care services.

  • Established catalog price means the price included in a catalog, price list, schedule, or other form that:

  • Bid with Lowest Evaluated Cost means the bid quoting lowest cost amongst all those bids evaluated to be substantially responsive;

  • Established catalogue price means the price included in a catalogue, price list, schedule, or other form that:

  • Peer review means evaluation of professional services rendered by a professional practitioner.

  • eligible Categories means Categories (1), (2) and (3) set forth in the table in paragraph 1 of Schedule 1 to this Agreement;

  • Minor source baseline date means the earliest date after the trigger date on which a major stationary source or a major modification subject to 40 CFR 52.21 or to regulations approved pursuant to 40 CFR 51.166 submits a complete application under the relevant regulations. The trigger date is: