Additional Electrical Equipment Sample Clauses

Additional Electrical Equipment. Tenant will not install or use electrically-operated equipment in excess of the design capacity of the Premises (as such design standards may be set forth within the Lease or otherwise established by Landlord if not so set forth) and Tenant will not install or operate in the Premises any electrically-operated equipment or machinery other than that commonly used in a normal office operation without first obtaining the prior written consent of the Landlord. Landlord may condition any consent required under this Paragraph 5.1(iv) upon the installation of separate meters and/or transformers or electrical panels for such equipment or machinery, or upon determination of electrical usage for such equipment or machinery by electrical engineering survey or any other commonly accepted method, at Tenant’s expense and the payment by Tenant of additional rent as compensation for the additional consumption of electricity occasioned by the operation of such additional equipment or machinery, at the rates and in the manner set forth in Paragraph 5.1(ii) above. Any such equipment to which Landlord so consents is herein called “Additional Electrical Equipment”. Landlord shall replace, when and as requested by Tenant, light bulbs and tubes, and ballasts, within the Premises which are Building standard, the cost of which Building standard replacement light bulbs and tubes, and ballasts, plus the labor cost for such replacement, shall be included in Operating Expenses. At Landlord’s option such undertaking of Landlord shall not include bulbs or tubes for any non-Building standard lighting, high hats, or other specialty lighting of Tenant, which shall be and remain the responsibility of Tenant.
AutoNDA by SimpleDocs
Additional Electrical Equipment. Tenant will not install or use electrically-operated equipment in excess of the design capacity of the Premises (as such design standards may be set forth within the Lease or otherwise established by Landlord if not so set forth) and Tenant will not install or operate in the Premises any electrically-operated equipment or machinery other than that commonly used in a normal office operation without first obtaining the prior written consent of the Landlord. Landlord may condition any consent required under this Paragraph 5.1(e) upon the installation of transformers or electrical panels for such equipment or machinery. Landlord shall replace, when and as requested by Tenant, light bulbs and tubes, and ballasts, within the Premises which are Building standard, the cost of which Building standard replacement light bulbs and tubes, and ballasts, plus the labor cost for such replacement, shall be included in Operating Expenses. At Landlord’s option such undertaking of Landlord shall not include bulbs or tubes for any non-Building standard lighting, high hats, or other specialty lighting of Tenant, which shall be and remain the responsibility of Tenant.
Additional Electrical Equipment. Tenant will not install or ------------------------------- use electrically-operated equipment in excess of the design capacity of the Demised Premises (as such design standards may be set forth in Exhibit "F" attached hereto or otherwise established by Landlord if not so set forth) and Tenant will not install or operate in the Demised Premises any electrically-operated equipment or machinery other than that commonly used in a normal office operation without first obtaining the prior written consent of the Landlord. Landlord may condition any consent required under this Paragraph 5.1
Additional Electrical Equipment. At the request, and at the expense, of the previous occupant of the Expansion Space, Landlord installed one (1) additional high voltage panel and one additional low voltage panel with associated transformers in the base building electrical closet on floor 3 of the Building (the "Additional Electrical Equipment"), and a meter to measure the electricity used through the Additional Electrical Equipment. Tenant shall have the right to use the Additional Electrical Equipment, and shall pay on demand the actual metered cost of electricity consumed through the Additional Electrical Equipment, plus any actual accounting expenses incurred by Landlord in connection with the metering thereof.
Additional Electrical Equipment. Tenant will not install or use electrically-operated equipment in excess of the design capacity of the Demised Premises (as established by Landlord if not so set forth) and Tenant will not install or operate in the Demised Premises any electrically-operated equipment or machinery other than that commonly used in a normal operation without first obtaining the prior written consent of the Landlord. Landlord may reasonably condition any consent required under this Paragraph 5 (E) upon the installation of separate meters (and transformers or electrical panels) for such equipment or machinery at Tenant's expense and the payment by Tenant of additional rent as compensation for the additional consumption of electricity occasioned by the operation of such additional equipment or machinery, at the rates and in the manner set forth in Paragraph 5(C) above. Tenant shall replace, at its sole cost, all light bulbs and tubes, and ballasts within the Demised Premises.
Additional Electrical Equipment. Lessee will not install or use electrically-operated equipment in excess of the design capacity of the Demised Premises (as such design standards may be established by Lessor) and Lessee will not install or operate in the Demised Premises any electrically-operated equipment or machinery other than that commonly used in a normal office operation without first obtaining the prior written consent of the Lessor. Lessor may condition any consent required under this Paragraph 22(e) upon the installation of separate meters (and transformers or electrical panels) for such equipment or machinery at Lessee's expense and the payment by Lessee of additional rent as compensation for the additional consumption of electricity occasioned by the operation of such additional equipment or machinery, at the rates and in the manner set forth in Paragraph 22(a) or (b) above.
Additional Electrical Equipment. Tenant will not install or use electrically-operated equipment in excess of the design capacity of the Demised Premises (as such
AutoNDA by SimpleDocs
Additional Electrical Equipment. If Tenant from time to time -------------------------------- shall require additional electrical power for use in the Premises in excess of the quantity being previously supplied to the Premises, Tenant may obtain such additional electrical power from the Port Authority so long as Tenant's use of electrical power will not exceed the capacity of existing feeders to the Building or the risers, conduits, transformers, cables, switches, meters, switchboards or wiring installations and Tenant's use of electrical power will not, in Landlord's reasonable judgment, overload such installations or interfere with the use thereof by other lessees and occupants of the Building. If, in Landlord's reasonable judgment, such excess requirements cannot be furnished unless additional risers, conduits, feeders, transformers, cables, switches, meters, switchboards or installations are installed in the Premises or the Building, Landlord, upon written request of Tenant, will, to the extent that such excess requirements can in Landlord's reasonable opinion be practically and safely met without undue interference with the use and occupancy of other lessees and occupants, proceed with reasonable diligence to install such additional risers, conduits, feeders, transformers, cables, switches, meters, switchboards or installations provided the same and the use thereof (i) shall be permitted by the Port Authority, (ii) shall not cause permanent damage to the Building or the Premises or create a dangerous condition or entail unreasonable Alterations or unreasonably interfere with, or disturb other lessees or occupants of the Building or increase the premiums for any insurance on the Building, and (iii) shall comply with applicable laws; but no risers, conduits, feeders, transformers, cables, switches, meters, switchboards or installations may be installed without Tenant's first submitting plans and obtaining the prior written consent of Landlord (which shall not be unreasonably withheld) and the Port Authority. Tenant shall pay all costs and expenses incurred by Landlord in connection with such installation of additional risers, etc., within thirty (30) days after receipt of an invoice and documentation substantiating all charges. All meters and all panel boards, feeders, risers, wiring, transformers, switches, switchboards and other conductors or equipment required for the Premises to receive electrical power directly from the Port Authority and/or public utility shall be installed by L...

Related to Additional Electrical Equipment

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Additional Equipment Additional Equipment may from time to time be added as the subject matter of this Agreement as agreed on by the parties. Any additional property will be added in an amendment describing the property, the monthly rental, security deposit, and stipulated loss value of the additional Equipment. All amendments must be in writing and signed by both parties. Other than by this amendment procedure, this Agreement may not be amended, modified, or altered in any manner except in writing signed by both parties.

  • Special Equipment The Employer agrees to provide specialty tools, emergency supplies/equipment, testing equipment and safety equipment as needed to perform required duties as determined and authorized by the Chief or designee. The emergency supplies/equipment will include appropriate survival provisions and equipment for each permanent Maintenance Mechanic 4 and the Law Enforcement Communications Systems Supervisor when they are performing duties that would require such provisions and equipment. When necessary, the employer will replenish used or expired survival provisions and damaged and unusable equipment. All supplies and equipment will be returned to the employer when the employee is no longer performing the duties that would require the survival provisions and/or equipment.

  • Rental Equipment 7.1 We will at all times own all Rental Equipment supplied to you. You will not let, sell, charge, assign, sub-license or allow a third party to use the Rental Equipment nor remove any labels, and shall not prejudice our rights in the Rental Equipment in any way. We may replace the Rental Equipment from time to time either with your prior consent or provided that the replacement Rental Equipment is of a specification that is at least equal to the Rental Equipment originally supplied and such change does not materially disrupt the provision of the Services. 7.2 Subject to the other terms of this paragraph 7, we (or our authorised representative) shall, during our usual working hours: 7.2.1 where necessary install the Rental Equipment at your premises at a time and date agreed with you; and 7.2.2 use our reasonable endeavours to repair any faults to the Rental Equipment in accordance with our standard procedures (which are available on request). 7.3 It is your responsibility to look after the Rental Equipment that is in your possession or custody and you agree to pay for the Rental Equipment to be replaced or repaired if it is lost, stolen or damaged. 7.4 You will notify us promptly of any faults which occur, any repairs which become necessary, and of any loss, theft or damage to the Rental Equipment. 7.5 You agree that you will only use the Rental Equipment in conjunction with the relevant Services and shall comply with our reasonable instructions in relation to its use. 7.6 You shall be responsible for maintaining adequate cover in place to insure the Rental Equipment while it remains in your possession and custody. You will also be responsible for obtaining and, where appropriate, paying for all necessary licenses, consents and approvals required for the installation and use of the Rental Equipment. 7.7 You will not (and you will ensure that no-one else will) repair, alter, modify or maintain, or make any additions or attachments to, or otherwise alter, the Rental Equipment without our prior written consent. We will not be liable for any costs or charges incurred, faults caused by, or repairs required as a result of, installation or programming of Rental Equipment that is carried out by any other person (other than our employees or agents). You agree to indemnify us for all losses, damages and expenses that are brought against or incurred by us, arising as a result of the same. 7.8 On expiry or termination of the Agreement or the relevant Service, all Rental Equipment must be returned to us in reasonable condition, subject to reasonable wear and tear. If you fail to return or make available for collection the Rental Equipment in a reasonable condition or at all we may, at our option, invoice you for a sum equal to the original cost of the Rental Equipment less any depreciation together with any costs reasonably incurred by us. 7.9 In the event that you return Rental Equipment to us and it is not received by us, in the absence of reasonable evidence that the Rental Equipment has been delivered to us you accept that you shall remain liable for the Rental Equipment.

  • Capital Equipment Collaborator’s commitment, if any, to provide ICD with capital equipment to enable the research and development activities under the Research Plan appears in Appendix B. If Collaborator transfers to ICD the capital equipment or provides funds for ICD to purchase it, then ICD will own the equipment. If Collaborator loans capital equipment to ICD for use during the CRADA, Collaborator will be responsible for paying all costs and fees associated with the transport, installation, maintenance, repair, removal, or disposal of the equipment, and ICD will not be liable for any damage to the equipment.

  • Metering Equipment 13.01. Utility will furnish, install, own and maintain metering equipment capable of measuring the flow of kilowatt-hours (kWh) of energy. The Customer's service associated with the CRG will be metered at a single metering point. The metering equipment will measure energy delivered by Utility to Customer and also measure energy delivered by Customer to Utility. Customer agrees to provide safe and reasonable access to the premises for installation of this equipment and its future maintenance or removal.

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • Testing of Metering Equipment Connecting Transmission Owner shall inspect and test all of its Metering Equipment upon installation and at least once every two (2) years thereafter. If requested to do so by NYISO or Developer, Connecting Transmission Owner shall, at Developer’s expense, inspect or test Metering Equipment more frequently than every two (2) years. Connecting Transmission Owner shall give reasonable notice of the time when any inspection or test shall take place, and Developer and NYISO may have representatives present at the test or inspection. If at any time Metering Equipment is found to be inaccurate or defective, it shall be adjusted, repaired or replaced at Developer’s expense, in order to provide accurate metering, unless the inaccuracy or defect is due to Connecting Transmission Owner’s failure to maintain, then Connecting Transmission Owner shall pay. If Metering Equipment fails to register, or if the measurement made by Metering Equipment during a test varies by more than two percent from the measurement made by the standard meter used in the test, Connecting Transmission Owner shall adjust the measurements by correcting all measurements for the period during which Metering Equipment was in error by using Developer’s check meters, if installed. If no such check meters are installed or if the period cannot be reasonably ascertained, the adjustment shall be for the period immediately preceding the test of the Metering Equipment equal to one-half the time from the date of the last previous test of the Metering Equipment. The NYISO shall reserve the right to review all associated metering equipment installation on the Developer’s or Connecting Transmission Owner’s property at any time.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

  • Installation Services The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!