AND ADDITIONAL COPIES. For purposes of this Agreement, "Software" shall include (and the terms and conditions of this Agreement shall apply to) any upgrades, updates, bug fixes or modified versions (collectively, "Upgrades") or backup copies of the Software licensed or provided to Customer by Brocade or its authorized distributor; provided that Customer has paid the applicable license fees and holds the corresponding license keys for such copies or Upgrades. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, CUSTOMER HAS NO LICENSE OR RIGHT TO USE ANY SUCH ADDITIONAL COPIES OR UPGRADES 29 30 UNLESS (1) CUSTOMER, AT THE TIME OF ACQUIRING SUCH COPY OR UPGRADE, ALREADY HOLDS A VALID LICENSE AND THE CORRESPONDING LICENSE KEYS TO THE ORIGINAL SOFTWARE; (2) SUCH ADDITIONAL COPIES OR UPGRADES ARE USED ONLY ON THE BROCADE EQUIPMENT FOR WHICH THE ORIGINAL SOFTWARE IS LICENSED; AND (3) CUSTOMER IS THE ORIGINAL END USER PURCHASER OR LESSEE OF SUCH BROCADE EQUIPMENT. Except as explicitly provided for in the Limited Warranty section below, Brocade reserves the right to charge additional fees for such additional copies and Upgrades. NOTICES OF PROPRIETARY RIGHTS. Customer may make such backup copies of the Software as may be necessary for Customer's lawful use, provided Customer affixes to such copies all trademark, copyright, patent, and notices of other proprietary rights on any such copies, in whatever form, of the Software in the same form and manner that such notices appear in the Software. Except as expressly authorized in this Agreement, Customer shall not make any copies or duplicates of any Software without the prior written permission of Brocade.

AND ADDITIONAL COPIES. NOTWITHSTANDING ANY OTHER PROVISION OF THE AGREEMENT: (1) CUSTOMER HAS NO LICENSE OR RIGHT TO MAKE OR USE ANY ADDITIONAL COPIES OR UPGRADES UNLESS CUSTOMER, AT THE TIME OF MAKING OR ACQUIRING SUCH COPY OR UPGRADE, ALREADY HOLDS A VALID LICENSE TO THE ORIGINAL SOFTWARE AND HAS PAID THE APPLICABLE FEE TO AN APPROVED SOURCE FOR THE UPGRADE OR ADDITIONAL COPIES; (2) USE OF UPGRADES IS LIMITED TO CISCO EQUIPMENT SUPPLIED BY AN APPROVED SOURCE FOR WHICH CUSTOMER IS THE ORIGINAL END USER PURCHASER OR LESSEE OR OTHERWISE HOLDS A VALID LICENSE TO USE THE SOFTWARE WHICH IS BEING UPGRADED; AND (3) THE MAKING AND USE OF ADDITIONAL COPIES IS LIMITED TO NECESSARY BACKUP PURPOSES ONLY. copies or duplicates of any Software without the prior written permission of Cisco.

AND ADDITIONAL COPIES. Notwithstanding any other provision of the XXXX: (1) You have no license or right to make or use any additional copies or upgrades unless you, at the time of making or acquiring such copy or upgrade, already hold a valid license to the original DONIT Service and have paid the applicable fee to an approved source for the upgrade or additional copies; (2) use of upgrades is limited to DONIT Service supplied by an approved source for which you are the original end user purchaser or otherwise hold a valid license to use DONIT Service which is being upgraded; and (3) the making and use of additional copies is limited to necessary backup purposes only. Updates will be deemed a part of the DONIT Services for all purposes under this XXXX. Updates may include both additions to and removals of particular functionality offered by a DONIT Services or may replace it entirely, and the content and functionality of such updates is at the sole discretion of DONIT. DONITor your Device may offer you the option to decline or delay Updates, but you must download and permit installation of all available Updates to obtain maximum benefit from the DONIT Services. DONIT may stop providing support for a DONIT Services until you have accepted and installed all Updates. DONIT will determine when and if Updates are appropriate and has no obligation to make any Updates available to you. DONIT in its sole discretion may stop providing Updates for any version of the DONIT Services other than the most current version, or Updates supporting use of the DONIT Services in connection with any versions of operating systems, email programs, browser programs and other software with which the DONIT Services is designed to operate. PROPRIETARY NOTICES You agree to maintain and reproduce all copyright, proprietary, and other notices on all copies, in any form, of DONIT Service in the same form and manner that such copyright and other proprietary notices are included on DONIT Service. Except as expressly authorized in the XXXX, Customer shall not make any copies or duplicates of any Software without the prior written permission of DONIT. EXPORT, RE-EXPORT, TRANSFER AND USE CONTROLS DONIT Service or direct products thereof supplied by DONIT under the XXXX are subject to export controls under the laws and regulations of the Republic of Slovenia and any other applicable countries' laws and regulations. Information regarding compliance with export, re- export, transfer and use are part of Terms of use. Y...

Related to AND ADDITIONAL COPIES

ALTERATIONS AND ADDITIONS Tenant shall not make, or suffer to be made, any alteration or addition to the Premises, or any part thereof, without the written consent of Landlord first had and obtained by Tenant, but at the cost of Tenant, and any addition to, or alteration of, the Premises, except moveable furniture and trade fixtures, shall at once become a part of the Premises and belong to Landlord. If Landlord consents to the making of any alteration, addition, or improvement to or of the Premises by Tenant, the same shall be made by Landlord at Tenant’s sole cost and expense. Any modifications to the building or building systems required by governmental code or otherwise as a result of Tenant’s alterations, additions or improvements shall be made at Tenant’s sole cost and expense. Tenant shall retain title to all moveable furniture and trade fixtures placed in the Premises. All heating, lighting, electrical, air conditioning, partitioning, drapery, carpeting and floor installations made by Tenant, together with all property that has become an integral part of the Premises, shall not be deemed trade fixtures. Tenant agrees that it will not proceed to make any alterations or additions, without having obtained consent from Landlord to do so, and until five (5) days from the receipt of such consent, in order that Landlord may post appropriate notices to avoid any liability to contractors or material suppliers for payment for Tenant’s improvements. Tenant will at all times permit such notices to be posted and to remain posted until the completion of work. Tenant shall, if required by Landlord, secure at Tenant’s own cost and expense, a completion and lien indemnity bond, satisfactory to Landlord, for such work. Tenant further covenants and agrees that any mechanic’s lien filed against the Premises or against the Complex for work claimed to have been done for, or materials claimed to have been furnished to Tenant, will be discharged by Tenant, by bond or otherwise, within ten (10) days after the filing thereof, at the cost and expense of Tenant. Any exceptions to the foregoing must be made in writing and executed by both Landlord and Tenant. Pursuant to California Civil Code Section 1938, Landlord hereby notifies Tenant that as of the Effective Date, the Premises and Building have not undergone inspection by a “Certified Access Specialist” to determine whether the Premises meets all applicable construction related accessibility standards under California Civil Code Section 55.53
Alterations, Modifications and Additions Company will, or will cause a Permitted Lessee to, make (or cause to be made) such alterations and modifications in and additions to the Airframe and the Engines as are required from time to time to meet the applicable requirements of the FAA or any applicable government of any other jurisdiction in which the Aircraft is then registered; except for (i) immaterial and non-recurring violations with respect to which corrective measures are being taken promptly by Company (or, if a Lease is then in effect, any Permitted Lessee) upon discovery thereof and (ii) any law, rule, regulation or order the validity or application of which is being contested in good faith by Company (or, if a Lease is then in effect, any Permitted Lessee) in any manner which does not involve any material risk of sale, loss or forfeiture of the Aircraft and does not materially adversely affect Loan Trustee’s interest in the Aircraft. In addition, Company (or any Permitted Lessee), at its own expense, may from time to time add further parts or accessories and make or cause to be made such alterations and modifications in and additions to the Airframe or any Engine as Company (or any Permitted Lessee) deems desirable in the proper conduct of its business, including, without limitation, removal (without replacement) of Parts; provided that no such alteration, modification or addition shall materially diminish the value or utility of the Airframe or such Engine below its value or utility immediately prior to such alteration, modification or addition, assuming that the Airframe or such Engine was then in the condition required to be maintained by the terms of this Indenture, except that the value (but not the utility) of the Airframe or any Engine may be reduced by the value of any such Parts that are removed that Company (or such Permitted Lessee) deems obsolete or no longer suitable or appropriate for use on the Airframe or any Engine. For the avoidance of doubt, Company may make alterations in the passenger configuration of the Aircraft and such alterations shall not be subject to the immediately preceding sentence. All Parts incorporated or installed in or attached or added to the Airframe or any Engine as the result of such alteration, modification or addition shall, without further act, be subject to the Lien of this Indenture. Notwithstanding the foregoing, Company (or any Permitted Lessee) may, at any time, remove any Part from the Airframe or any Engine if such Part: (i) is in addition to, and not in replacement of or substitution for, any Part originally incorporated or installed in or attached to the Airframe or such Engine at the time of delivery thereof to Company or any Part in replacement of, or substitution for, any such Part, (ii) is not required to be incorporated or installed in or attached or added to the Airframe or such Engine pursuant to the first sentence of this Section 7.04(c) and (iii) can be removed from the Airframe or such Engine without materially diminishing the value or utility required to be maintained by the terms of this Indenture that the Airframe or such Engine would have had had such Part never been installed on the Airframe or such Engine. Upon the removal by Company (or any Permitted Lessee) of any Part as permitted by this Section 7.04(c), such removed Part shall, without further act, be free and clear of all rights and interests of Loan Trustee and the Lien of this Indenture and shall no longer be deemed a Part hereunder. Upon request of Company from time to time, Loan Trustee shall execute and deliver to Company instruments reasonably requested by Company confirming the release of any such removed Part from the Lien of this Indenture. Loan Trustee acknowledges that it has no interest in the Excluded Equipment. Notwithstanding the provisions of this Section 7.04(c) or any other term or condition of this Indenture, Company (or any Permitted Lessee) may from time to time install on, and remove from, the Aircraft equipment that is owned by, leased to or conditionally sold to Company (or any Permitted Lessee) (and title to such equipment shall remain vested in Company, such Permitted Lessee, or the lessor or the conditional vendor thereof) if (1) such equipment is Excluded Equipment and (2) the location affected by any such removal, if damaged, is repaired prior to return, in a workmanlike manner, to a condition suitable for commercial passenger service; provided that all costs of installation, removal and replacement shall be the responsibility of Company.
CHANGES AND ADDITIONS Modifications, supplements, and annexes to this Agreement constitute an essential part of it and are legally binding when they are documented in writing and endorsed by the duly authorized representatives of the Parties.
Interpretive and Additional Provisions In connection with the operation of this Agreement, the Custodian and each Fund on behalf of each of the Portfolios, may from time to time agree on such provisions interpretive of or in addition to the provisions of this Agreement as may in their joint opinion be consistent with the general tenor of this Agreement. Any such interpretive or additional provisions shall be in a writing signed by all parties and shall be annexed hereto, provided that no such interpretive or additional provisions shall contravene any applicable federal or state regulations or any provision of a Fund’s Governing Documents. No interpretive or additional provisions made as provided in the preceding sentence shall be deemed to be an amendment of this Agreement.
Amendments; Waivers; No Additional Consideration No provision of this Agreement may be waived or amended except in a written instrument signed by the Company, Parent and the Shareholders. No waiver of any default with respect to any provision, condition or requirement of this Agreement shall be deemed to be a continuing waiver in the future or a waiver of any subsequent default or a waiver of any other provision, condition or requirement hereof, nor shall any delay or omission of any Party to exercise any right hereunder in any manner impair the exercise of any such right.
Description of Goods or Services and Additional Terms and Conditions The Contractor shall perform as set forth in Exhibit A. For purposes of this Contract, to perform and the performance in Exhibit A is referred to as “Perform” and the “Performance.”
Specifications of Certain Matters Anything referred to in this Annex as being specified in Paragraph 11 also may be specified in one or more Confirmations or other documents and this Annex will be construed accordingly.
Statements Required in Certificate and Opinion Each certificate and opinion with respect to compliance with a condition or covenant provided for in this Indenture shall include: (1) a statement that the Person making such certificate or opinion has read such covenant or condition; (2) a brief statement as to the nature and scope of the examination or investigation upon which the statements or opinions contained in such certificate or opinion are based; (3) a statement that, in the opinion of such Person, it or he has made such examination or investigation as is necessary to enable it or him to express an informed opinion as to whether or not such covenant or condition has been complied with; and (4) a statement as to whether or not, in the opinion of such Person, such covenant or condition has been complied with.
Additional Limitation of Liability The parties hereto are expressly put on notice that a Certificate of Trust, referring to the Trust’s Agreement and Declaration of Trust (the “Certificate”), is on file with the Secretary of the State of Delaware. The Certificate was executed by a trustee of the Trust on behalf of the Trust as trustee, and not individually, and, as provided in the Trust’s Agreement and Declaration of Trust, the obligations of the Trust are not binding on the Trust’s trustees, officers or shareholders individually but are binding only upon the assets and property of the Trust, or the particular series in question, as the case may be. Further, the liabilities and obligations of any series of the Trust shall be enforceable only against the assets belonging to such series, and not against the assets of any other series.
LIMITATION OF LIABILITY OF THE MANAGER The Manager shall not be liable for any error of judgment or mistake of law or for any loss suffered by the Fund in connection with the matters to which this Agreement relates, except a loss resulting from willful misfeasance, bad faith or gross negligence on the Manager's part in the performance of its duties or from reckless disregard by it of its obligations and duties under this Agreement.

AND ADDITIONAL COPIES Sample Clauses

Filter & Search

Related Clauses

Related to AND ADDITIONAL COPIES