Formation and Composition The Parties to this agreement will maintain a Joint Administration and Dispute Resolution Committee (JADRC) consisting of five (5) representatives of the employers and five (5) representatives of the Provincial Bargaining Council.
Board Composition (a) On the date of this Agreement, the Company shall cause the Person(s), if any, listed on Schedule B to be designated as Minority Shareholder Observers (as defined below) with all rights set forth in Section 2.1(d) (it being understood that at any time after the date hereof until the date that the Minority Shareholder Observer(s) are appointed to the Board as directors pursuant to the immediately following sentence, the Company shall, promptly upon receipt of a written request from the Minority Shareholder Representative, cause any Person(s) named in such written request to be designated as Minority Shareholder Observer(s); provided, that there may be no more than two Minority Shareholder Observers at any one time). As soon as reasonably practicable following receipt of the Company Shareholder Approval and in any case within one Business Day thereafter, the Board shall increase the size of the Board by two directors and cause such persons to be appointed to the Board as directors; provided, that if the Company Shareholder Approval is not obtained by the date that is 30 days prior to the Designation Date for the Next Annual Meeting, (i) the Company shall take all commercially reasonable actions necessary to cause the election of two Minority Shareholder Observers to the Board as directors at the Next Annual Meeting or (ii) if the Minority Shareholders no longer beneficially own, in the aggregate, 66% or more of the Minority Shares, the Company shall take all commercially reasonable actions necessary to cause the election of one Minority Shareholder Observer, designated by the Minority Shareholder Representative on behalf of the Minority Shareholders, to be elected to the Board as director at the Next Annual Meeting; in each case, the Company’s obligations to take all commercially reasonable actions necessary to cause the election of such Minority Shareholder Observers to the Board as directors shall include the obligation of the Company to take all actions to cause such Minority Shareholder Observers to be nominated by the Board, including the Governance Committee, for election at the Next Annual Meeting. Thereafter, and for so long as (i) the Minority Shareholders continue to beneficially own, in the aggregate, 66% or more of the Minority Shares (the “Two Designee Threshold”), the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate two directors for election to the Board and (ii)(x) the Minority Shareholders continue to beneficially own, in the aggregate, 10% or more of the then outstanding Equity Securities, or (y) the Minority Shareholders beneficially own, in the aggregate, less than 10% of the then outstanding Equity Securities but such Minority Shareholders continue to beneficially own, in the aggregate, 33% or more of the Minority Shares (“One Designee Threshold”), then the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate one director for election to the Board (each such director nominee, including such initial nominees, a “Minority Shareholder Designee”), such percentages in each case calculated on a fully diluted basis giving effect to any securities, warrants, options or other rights convertible into or exchangeable or exercisable for equity securities of the Company, whether or not subject to contingencies or passage of time, or both; provided, that, if the Minority Shareholders’ beneficial ownership, in the aggregate, of Equity Securities (x) falls below the Two Designee Threshold, then one Minority Shareholder Designee, designated by the Minority Shareholder Representative on behalf of the Minority Shareholders, shall resign from the Board as promptly as practicable upon the Minority Shareholder Representative becoming aware of the Minority Shareholders falling below such threshold, or (y) falls below the One Designee Threshold, then the Minority Shareholder Designee shall resign from the Board as promptly as practicable upon the Minority Shareholder Representative becoming aware of the Minority Shareholders falling below such threshold. So long as the Minority Shareholder Representative, on behalf of the Minority Shareholders, has the right to designate at least one director for election to the Board, one Minority Shareholder Designee designated by the Minority Shareholder Representative on behalf of the Minority Shareholders shall be entitled to serve on each committee of the Board except as prohibited by applicable law or stock exchange requirements; provided, that if such Minority Shareholder Designee is so prohibited, such Minority Shareholder Designee shall nonetheless have the right to participate as a non-voting observer on such committee (any such observer, a “Committee Observer”). In each case, the Company shall take all commercially reasonable actions necessary to cause the appointment of such Minority Shareholder Designee(s) (x) to the Board (including taking all actions to cause such Minority Shareholder Designee(s) to be nominated by the Board, including the Governance Committee, for election at each annual meeting of the shareholders of Company (or at any special shareholder meeting of the Company at which the Board is to be elected)) and (y) to the applicable committee of the Board (including taking all actions to cause such Minority Shareholder Designee(s) to be elected by the Board to serve on such committee of the Board).
(b) Each Minority Shareholder Designee shall comply in all respects with the Company’s corporate governance guidelines as in effect from time to time, in each case as determined by the Board’s Corporate Governance and Nominating Committee (the “Governance Committee”); provided, that the Company hereby acknowledges and agrees that the initial Minority Shareholder Designees comply with such corporate governance guidelines. The Minority Shareholder Representative shall notify the Company of any proposed Minority Shareholder Designee in writing no later than the latest date on which shareholders of the Company may make nominations to the Board in accordance with the Code of Regulations (such date, the “Designation Date”), together with all information concerning such nominee required to be delivered to the Company by the Code of Regulations and such other information reasonably requested by the Company; provided, that the Company shall give the Shareholder Representative 30 days written notice of the Designation Date; provided, further, that that in the event the Minority Shareholder Representative fails to provide any such notice, the Minority Shareholder Designees shall be the person(s) then serving as the Minority Shareholder Designees as long as the Minority Shareholder Representative provides such information to the Company promptly upon request by the Company.
(c) In the event of the death, disability, resignation or removal of a Minority Shareholder Designee, the Board will promptly elect to the Board a replacement director designated by the Minority Shareholder Representative, subject to the fulfillment of the requirements set forth in first sentence of Section 2.1(b), to fill the resulting vacancy, and such individual shall then be deemed a Minority Shareholder Designee for all purposes under this Agreement. In the event the Minority Shareholder Representative fails to designate a replacement director to fill any such vacancy, such Board seat shall remain vacant until the Minority Shareholder Representative designates such replacement director to fill such vacancy.
(d) So long as the Minority Shareholder Representative on behalf of the Minority Shareholders has the right to designate any Minority Shareholder Designee for election to the Board pursuant to Section 2.1(b), the Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to designate a non-voting observer to the Board in lieu of, or as a replacement for, any Minority Shareholder Designee (any such observer, a “Minority Shareholder Observer”). Each Minority Shareholder Observer shall be entitled to (x) attend all meetings of the Board and each applicable committee of the Board except as prohibited by applicable law or stock exchange requirements and (y) receive all materials with respect to such meetings. The Minority Shareholder Representative on behalf of the Minority Shareholders shall have the right to remove or replace any Minority Shareholder Observer at any time from time to time, subject to compliance with the first sentence of Section 2.1(b). The Company shall (x) notify each Minority Shareholder Observer of all meetings of the Board (and the applicable committees thereof) using the same form of communication used to notify the directors on the Board and (y) provide each Minority Shareholder Observer with copies of all notices, minutes, consents and other materials provided to the directors on the Board no later than the time that such materials are provided to the directors. Each Minority Shareholder Observer shall be entitled to reimbursement for reasonable out-of-pocket expenses incurred in attending meetings of the Board (and the applicable committees thereof) to the same extent as directors on the Board.
(e) If a Committee Observer is designated pursuant to Section 2.1(a), such Committee Observer shall be entitled to (x) attend all meetings of each committee of the Board except as prohibited by applicable law or stock exchange requirements and (y) receive all materials with respect to such meetings. The Company shall (x) notify each Committee Observer of all meetings of the committees of the Board using the same form of communication used to notify the members of such committee and (y) provide each Committee Observer with copies of all notices, minutes, consents and other materials provided to the members of such committee no later than the time that such materials are provided to the members. Each Committee Observer shall be entitled to reimbursement for reasonable out-of-pocket expenses incurred in attending meetings of the committees of the Board to the same extent as members of such committees.
Compositions any corporate action, legal proceedings or other procedures or steps are taken, or negotiations commenced, by any Security Party or by any of its creditors with a view to the general readjustment or rescheduling of all or part of its Indebtedness or to proposing any kind of composition, compromise or arrangement involving such company and any of its creditors; or
Committee Composition The Redeployment Committee shall be comprised of equal numbers of representatives of the Hospital and of the Union. The number of representatives will be determined locally. Where for the purposes of HTAP (the Ontario Hospital Training and Adjustment Panel) there is another hospital-wide staffing and redeployment committee created or in existence, Union members of the Redeployment Committee shall serve on any such hospital-wide staffing committee established with the same or similar terms of reference, and the number of Union members on such committee will be proportionate to the number of its bargaining unit members at the particular Hospital in relation to other staff groups. Meetings of the Redeployment Committee shall be held during normal working hours. Time spent attending such meetings shall be deemed to be work time for which the representative(s) shall be paid by the Hospital at his or her regular or premium rate as may be applicable. Each party shall appoint a co-chair for the Redeployment Committee. Co-chairs shall chair alternative meetings of the Committee and will be jointly responsible for establishing the agenda of the Committee meetings, preparing minutes and writing such correspondence as the Committee may direct.
Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time.
(b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.
Review of Materials During the term of this Agreement, Client shall ensure that all prospectuses, statements of additional information, registration statements, proxy statements, reports to shareholders, advertising and sales literature or other materials prepared for distribution to Fund shareholders or the public, which refer to the Subadviser in any way, prepared by employees or agents of Client or its affiliates are consistent with information previously provided by Subadviser. Subadviser shall promptly notify the Client of any changes to information pertaining to the Subadviser and stated in the materials described in this Section 6(g).
Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.
2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.
Product Testing No later than [**] prior to a scheduled Delivery ARIAD US shall send to ARIAD SWISSCO the Delivery Documents for review. Following such review, unless within [**] of receipt of the Delivery Documents ARIAD SWISSCO gives written notice of rejection of the Product to be delivered, stating the reasons for such rejection, the Delivery shall proceed, and both Parties shall organize the same. Upon arrival at ARIAD SWISSCO nominated site it shall visually inspect the shipment of the Product to identify any damage to the external packaging. ARIAD SWISSCO may reject any shipment (or portion thereof) of the Product that is damaged by providing to ARIAD US reasonable evidence of damage within [**] after Delivery of such Product. If ARIAD SWISSCO does not so reject any shipment (or portion thereof) of the Product within [**] of Delivery of such Product, ARIAD SWISSCO shall be deemed to have accepted such shipment of the Product; provided, however, that in the case of the Product having any Latent Defect, ARIAD SWISSCO shall notify ARIAD US promptly once it becomes aware that a Product contains a Latent Defect and subsequently may reject such Product by giving written notice to ARIAD US of ARIAD SWISSCO’s rejection of such Product and shipping a representative sample of such Product or other evidence of Non-Conformance to ARIAD US within [**] after becoming aware of such Latent Defect, which notice shall include a description of the Latent Defect.
Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.
Product Labeling The labeling of all Licensed Products sold or offered for sale under this Agreement shall expressly state that the Licensed Product is manufactured under a license from the Medicines Patent Pool.
