CESSATION OF MANUFACTURE Sample Clauses

CESSATION OF MANUFACTURE. CHANGES IN DESIGN; ALLOCATION OF PRODUCT; RELEASE OF NEW PRODUCTS Nortel expressly reserves the following rights with respect to the offer of Products to Distributor: (1) to cease manufacturing, distributing, supporting, except as provided in the "Life Cycle Support" provision in the Product Reference Guide, any Products not constituting an entire line of Products, upon **** written notice to Distributor; and (2) to cease manufacturing, distributing, supporting, except as provided in the "Life Cycle Support" provisions in the Product Reference Guide, an entire line of Products upon **** written notice to Distributor; (3) except as provided in Section 4.1.4, "Changes in Design or Manufacture", to alter the design specifications, configuration, construction, material, or manufacturing methods applicable to any Product, without notice, provided that such alteration does not materially and adversely affect the performance of the Product; and (4) to allocate limited supplies of Product among all Nortel Distributors as reasonably seems most equitable to Nortel in light of all information then available to it; and (5) to release new Products and Product improvements only pursuant to a controlled release program, and under such program to allocate such Products to and among such Nortel Distributors as Nortel, in its sole discretion, may determine.
Sample 1Sample 2
AutoNDA by SimpleDocs
CESSATION OF MANUFACTURE. MagneTek agrees that if it does not sell the PTS Division of MagneTek to the Carlyle Group and it ceases to manufacture any of the products identified on Schedule 6.1 of this Agreement, it will provide to Buyer on commercially reasonable terms all drawings, test specifications and procedures, technical data, pc board drawings, wiring, diagrams, schematic diagrams, parts lists, technical manuals and parts, specifications and other data necessary for Buyer to manufacture or arrange for the manufacture of any such product which Seller no longer manufactures.
Sample 1
CESSATION OF MANUFACTURE. If this Agreement is terminated for any reason other than termination by Onyx pursuant to Section 10.2 or termination by XXXX for cause pursuant to Section 10.3, XXXX shall provide Onyx with the opportunity to purchase up to [*] of inventory of Product(s) at the pricing then in effect at the time of the notice of termination, with the amount of such inventory of Product(s) for such up-to-[*] period being determined with reference to the amount [*].
Sample 1
CESSATION OF MANUFACTURE. CHANGES IN DESIGN; ALLOCATION OF PRODUCT; RELEASE OF NEW PRODUCTS ****
Sample 1
CESSATION OF MANUFACTURE. (a) Subject to 15.2(c)(i), after the Effective Date, all costs and expenses incurred in connection with the costs of closure, dismantling, removal and demolition of machinery, equipment and structures transferred to the Joint Venture by the FMC Group as a part of the Transferred Assets (the "FMC Equipment") down to foundation level shall be solely to the Joint Venture's account. Environmental Costs arising from the presence of Facilities Substances on or in such FMC Equipment shall be to the Joint Venture's account. Environmental Costs arising from the presence of non- Facilities Substances on or in such FMC Equipment shall be to the FMC Group's account. Environmental Costs arising from the presence of Facilities Substances and/or Non-Facilities Substances on the land under such FMC Equipment or in the subsurface, soil or groundwater under such FMC Equipment or removal of FMC Equipment below grade shall be apportioned in accordance with Article 15.2(a) above. Notwithstanding the foregoing provisions of this Article 15.11(a), all costs and expenses incurred in connection with [****************************************************** *********************************************************************** ***************************] shall be solely to FMC's account and FMC shall pay all such amounts and reimburse the Joint Venture for such amounts. (b) After the Effective Date, all costs and expenses incurred in connection with the costs of closure, dismantling, removal and demolition of machinery, equipment and structures transferred to the Joint Venture by the Solutia Group as a part of the Transferred Assets (the "Solutia Equipment") down to foundation level shall be solely to the Joint Venture's account. Environmental Costs arising from the presence of Facilities Substances on or in such Solutia Equipment shall be to the Joint Venture's account. Environmental Costs arising from the presence of non-Facilities Substances on or in such Solutia Equipment shall be to the Solutia Group's account. Environmental Costs arising from the presence of Facilities Substances and/or Non-Facilities Substances on the land under such Solutia Equipment or in the subsurface, soil or groundwater under such Solutia Equipment or removal of Solutia Equipment below grade shall be apportioned in accordance with Article 15.2(d) above. Notwithstanding the foregoing provisions of this Article 15.11(b), all costs and expenses incurred in connection with [********************************...
Sample 1

Related to CESSATION OF MANUFACTURE

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Distribution of Materials You will keep an accurate record of the names and addresses of all persons to whom you give copies of the Registration Statement, the Prospectus, any Preliminary Prospectus (or any amendment or supplement thereto) or any Offering Circular or any Preliminary Offering Circular and, when furnished with any subsequent amendment to the Registration Statement, any subsequent Prospectus, any subsequent Offering Circular or any memorandum outlining changes in the Registration Statement or any Prospectus or Offering Circular, you will, upon request of the Manager, promptly forward copies thereof to such persons.

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements. 2.2. The fixation elements shall be strong and firmly secured to the LED(s) and the LED module.

  • Quality of Materials and workmanship The Contractor shall ensure that the Construction, Materials and workmanship are in accordance with the requirements specified in this Agreement, Specifications and Standards and Good Industry Practice.

  • No Improper Use of Materials During his or her employment with the Company, Employee will not improperly use or disclose any Confidential Information or trade secrets, if any, of any former employer or any other person to whom Employee has an obligation of confidentiality, and Employee will not bring onto the premises of the Company any unpublished documents or any property belonging to any former employer or any other person to whom Employee has an obligation of confidentiality unless consented to in writing by that former employer or person.

  • Storage of Materials Borrower shall cause all materials supplied for or intended to be utilized in the construction of the Improvements but not affixed to or incorporated into the Property to be stored on the Property or at such other location as may be approved by Lender in writing, with adequate safeguards to prevent loss, theft, damage or commingling with other materials not intended to be utilized in the construction of the Improvements.

  • Removal of Materials If you decide you would like to remove your Materials from the Service, you may provide written notice to Prime Publishing by either deleting the image through the Prime Publishing interface or by contacting Prime Publishing customer service, and Prime Publishing will remove such Materials from the Service within a reasonable period of time. 5) License for Name, Trademarks and Likenesses. You hereby grant to Prime Publishing, its Affiliates and sublicensees a nonexclusive, worldwide, royalty-free license to use all trademarks, trade names, and the names and likenesses of any individuals that appear in the Materials. You grant Prime Publishing, its Affiliates and sublicensees the right to use the name that you submit in connection with the Materials. 6) Specifications and Guidelines. You agree to submit Materials to us in accordance with all guidelines for use of the Service posted on the Prime Publishing web site or of which you are otherwise notified ("Guidelines"), as these Guidelines may be changed in the future. 7)

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract. a. The contractor shall notify all potential subcontractors and suppliers and lessors of their EEO obligations under this contract. b. The contractor will use good faith efforts to ensure subcontractor compliance with their EEO obligations.

  • Separation of Components The SOFTWARE PRODUCT is licensed as a single product. Its component parts may not be separated for use on more than one computer.

  • Transfer of Materials To facilitate the conduct of activities under the Research Plan or an Additional Research Plan, as applicable, either Party (the “Transferor Party”) may, at its election, provide Materials to the other Party (the “Transferee Party”) solely as mutually agreed by the Parties or as set forth in the Research Plan or any Additional Research Plan. All such Materials (a) will remain the sole property of the Transferor Party, (b) will be used only in the exercise if the Transferee Party’s rights or fulfillment of the Transferee Party’s obligations under this Agreement, (c) except as provided in the Research Plan or Additional Research Plan or as otherwise agreed by the Parties, (i) will remain solely under the control of the Transferee Party, (ii) will not be used or delivered by the Transferee Party to or for the benefit of any Third Party, and (iii) will not be used in research or testing involving human subjects, and (d) will be subject to all additional restrictions and obligations that the Transferor Party has identified in a written notice to the Transferee Party as being necessary for the Transferor Party to comply with its obligations to Third Parties with respect to the applicable Material, which notice is provided at or prior to the delivery of such Materials to the Transferee Party. Without limitation to ARTICLE 7, all Materials supplied under this Section 2.1.9 are supplied “as is”, with no warranties of fitness for a particular purpose, and must be used with prudence and appropriate caution in any experimental work, as not all of their characteristics may be known. Following the completion of the activities for which the applicable Materials were supplied under this Section 2.1.9 or upon the Transferor Party’s earlier request, the Transferee Party will either destroy or return to the Transferor Party, at the Transferor Party’s sole discretion, all Materials provided by the Transferor Party that are unused; provided that Vertex will have the right to retain and continue to use any Materials provided by Company that Vertex has the right to Exploit under the license granted to Vertex pursuant to Section 4.1.1.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!