DSS Software, SCIP Software and GCE Sample Clauses

DSS Software, SCIP Software and GCE. Such supplemental Acceptance inspection shall be conducted by Customer to the extent necessary to verify that the DSS Software, and as applicable the SCIP Software, conforms to the applicable requirements of Exhibit B5 (Ground Products Technical Specification and Test Plan), or the GCE conforms to the applicable requirements of Exhibit H (Ground Control Equipment Upgrade), as applicable. If Customer fails to provide notice within the time specified, Acceptance shall be deemed to have irrevocably occurred with respect to the DSS Software, SCIP Software or the GCE, as applicable.
Sample 1Sample 2
AutoNDA by SimpleDocs
DSS Software, SCIP Software and GCE and Article 8.1 (Satellite Acceptance), respectively) that requires Customer approval pursuant to Exhibit A (Statement of Work), Customer shall, within ten (10) days of Delivery, notify Boeing in writing that such Deliverable Data has either been: (i) accepted (irrevocable “Acceptance” with respect to each such item of Deliverable Data); or (ii) determined to contain Non-Conformances, in each case identifying each such Non-Conformance (with reference to the applicable requirement of Exhibit A (Statement of Work) deemed not met). If Customer notifies Boeing of any Non-Conformance pursuant to the foregoing, Boeing shall promptly correct any Non-Conformance with respect to such Deliverable Data identified in such notice from Customer and re-submit the Deliverable Data to Customer for a subsequent inspection to verify that Boeing has corrected the previously-identified Non-Conformance and that the Deliverable Data complies with the requirements of this Contract, including Exhibit A (Statement of Work) and Exhibit B5 (Satmex Ground Products Technical Specification and Test Plan), as applicable. Boeing shall be required to repeat the process described in this Paragraph until such time as the relevant Deliverable Data has either been Accepted by Customer in writing or has been deemed Accepted in accordance with this Paragraph. If Customer fails to provide notice within the time specified above, Acceptance shall be deemed to have irrevocably occurred with respect to such Deliverable Data. For Deliverable Data that does not require Customer approval pursuant to Exhibit A (Statement of Work), Acceptance of such Deliverable Data shall be deemed to have irrevocably occurred upon Delivery.
Sample 1
DSS Software, SCIP Software and GCE which shall demonstrate, among other things, the integration of the Ground Control Equipment with Customer’s primary and backup tracking, telemetry and command and designated communication links. If Customer does not exercise the option to purchase the Ground Control Equipment, Boeing shall provide, no later than at the Preliminary Design Review for the F-2 Satellite, the list of hardware required to be compatible with and to install the SCIP Software and meet the performance requirements of the SCIP Software to properly and safely operate the Satellite from the Customer SCFs. Table 10-2A GCE Upgrade for Price (U.S.$ Millions) Ground Equipment Price Exercise Date Contract Reference Option 1: First Time Price per Site (***)* EDC + (***) Statement of Work Section 1.3.8 Option 2: For Each additional Satellite per Site (***)* CATP + (***) Statement of Work Section 1.3.8 * Notwithstanding the figures provided in Table 10-2A above, Boeing will, on a Reasonable Efforts basis, work with Customer to investigate and identify the specific requirements and costs associated with the GCE options (***) after BSSI has conducted a facility site visit of the Satmex ground facility sites at Boeing’s cost. (***).
Sample 1
DSS Software, SCIP Software and GCE which shall demonstrate, among other things, the integration of the Ground Control Equipment with Customer’s primary and backup tracking, telemetry and command and designated communication links. If Customer does not exercise the option to purchase the Ground Control Equipment, Boeing shall provide, no later than at the Preliminary Design Review for the F-2 Satellite, the list of hardware required to be compatible with and to install the SCIP Software and meet the performance requirements of the SCIP Software to properly and safely operate the Satellite from the Customer SCFs. Table 10-2A GCE Upgrade for Price (U.S.$ Millions) Ground Equipment Price Exercise Date Contract Reference Option 1: First Time Price per Site [*****] EDC + [*****] Statement of Work Section 1.3.8 Option 2: For Each additional Satellite per Site [*****] CATP + [*****] Statement of Work Section 1.3.8 * [*****]
Sample 1
DSS Software, SCIP Software and GCE and Article 8.1 (Satellite Acceptance), respectively) that requires Customer approval pursuant to Exhibit A (Statement of Work), Customer shall, within ten (10) days of Delivery, notify Boeing in writing that such Deliverable Data has either been: (i) accepted (irrevocable BOEING / SATMEX PROPRIETARY FOIA CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT TO CERTAIN INFORMATION IN THIS AGREEMENT. THIS INFORMATION HAS BEEN REDACTED AND DENOTED BY ASTERISKS (***). COPIES OF THE EXHIBIT CONTAINING THE REDACTED PORTIONS HAVE BEEN FILED SEPARATELY WITH THE COMMISSION SUBJECT TO A REQUEST FOR CONFIDENTIAL TREATMENT PURSUANT TO RULE 24B-2 UNDER THE SECURITIES EXCHANGE ACT. “Acceptance” with respect to each such item of Deliverable Data); or (ii) determined to contain Non-Conformances, in each case identifying each such Non-Conformance (with reference to the applicable requirement of Exhibit A (Statement of Work) deemed not met). If Customer notifies Boeing of any Non-Conformance pursuant to the foregoing, Boeing shall promptly correct any Non-Conformance with respect to such Deliverable Data identified in such notice from Customer and re-submit the Deliverable Data to Customer for a subsequent inspection to verify that Boeing has corrected the previously-identified Non-Conformance and that the Deliverable Data complies with the requirements of this Contract, including Exhibit A (Statement of Work) and Exhibit B5 (Ground Products Technical Specification and Test Plan), as applicable. Boeing shall be required to repeat the process described in this Paragraph until such time as the relevant Deliverable Data has either been Accepted by Customer in writing or has been deemed Accepted in accordance with this Paragraph. If Customer fails to provide notice within the time specified above, Acceptance shall be deemed to have irrevocably occurred with respect to such Deliverable Data. For Deliverable Data that does not require Customer approval pursuant to Exhibit A (Statement of Work), Acceptance of such Deliverable Data shall be deemed to have irrevocably occurred upon Delivery.
Sample 1
DSS Software, SCIP Software and GCE which shall demonstrate, among other things, the integration of the Ground Control Equipment with Customer’s primary and backup tracking, telemetry and command and designated communication links. If Customer does not exercise the option to purchase the Ground Control Equipment, Boeing shall provide, no later than at the Preliminary Design Review for the F-1 Satellite, BOEING / SATMEX PROPRIETARY FOIA CONFIDENTIAL TREATMENT HAS BEEN REQUESTED WITH RESPECT TO CERTAIN INFORMATION IN THIS AGREEMENT. THIS INFORMATION HAS BEEN REDACTED AND DENOTED BY ASTERISKS (***). COPIES OF THE EXHIBIT CONTAINING THE REDACTED PORTIONS HAVE BEEN FILED SEPARATELY WITH THE COMMISSION SUBJECT TO A REQUEST FOR CONFIDENTIAL TREATMENT PURSUANT TO RULE 24B-2 UNDER THE SECURITIES EXCHANGE ACT. the list of hardware required to be compatible with and to install the SCIP Software and meet the performance requirements of the SCIP Software to properly and safely operate the Satellite from the Customer SCFs. Table 10-2A GCE Upgrade for Ground Equipment Price (U.S.$ Millions) Price Exercise Date Contract Reference Option 1: First Time Price per Site (***) EDC + (***) months Statement of Work Section 1.3.8 Option 2: For Each additional Satellite per Site (***) CATP + (***) month Statement of Work Section 1.3.8 * Notwithstanding the figures provided in Table 10-2A above, Boeing will, on a Reasonable Efforts basis, work with Customer to investigate and identify the specific requirements and costs associated with the GCE options within (***) days after EDC for Option 1 and, following a corresponding written request by Customer, to be provided no later than (***) days prior to the Exercise Date for Option 2. (***).
Sample 1
DSS Software, SCIP Software and GCE 
Sample 1
AutoNDA by SimpleDocs

Related to DSS Software, SCIP Software and GCE

  • Licensed Software Section 3.17(f).......................................27

  • Third Party Software Customer acknowledges that in order for MyEcheck to perform the Consulting Services, Customer may need to obtain additional third party services ("Third Party Services") or third party technology ("Third Party Technology"). Customer agrees that the rights and licenses with respect to Third Party Technology and Third Party Services shall be under terms set forth in the pertinent purchase, license or services agreements between Customer and the vendors of such Third Party Software or Third Party Services. Customer shall execute and comply with appropriate purchase, license, or services agreements with respect to any Third Party Software or Third Party Services. Any amounts payable to third party vendors or service providers under such agreements are the sole responsibility of Customer and shall be paid directly by Customer to such third party vendors or service providers. MyEcheck Services Agreement

  • Company Software “Company Software” shall mean any software (including software development tools and software embedded in hardware devices, and all updates, upgrades, releases, enhancements and bug fixes) owned, developed (or currently being developed), used, marketed, distributed, licensed or sold by an Acquired Corporation at any time (other than non-customized third-party software that is not incorporated into any Company Product and is licensed to an Acquired Corporation solely in object code form and solely for internal use on a non-exclusive basis).

  • Hardware and Software Requirements In order to access and retain Disclosures electronically, you must satisfy the following computer hardware and software requirements: access to the Internet; an email account and related software capable of receiving email through the Internet; a web browser which is SSL-compliant and supports secure sessions, and hardware capable of running this software.

  • Software Licenses Seller has all necessary licenses to use all material third-party software used in Seller's business, and Seller's use of third-party software does not infringe the rights of any Person.

  • Software Warranty NETGEAR warrants to the end-user that each item of Software, as delivered or updated by NETGEAR and properly installed and operated on the Hardware or other equipment it is originally licensed for, will function substantially as described in its then-current user documentation during its respective warranty period. If any item of Software fails to so perform during its warranty period, as the sole remedy NETGEAR or NETGEAR's supplier will at its discretion provide a suitable fix, patch or workaround for the problem which may be included in a future revision of the Software. For specific Software which is distributed by NETGEAR as a licensee of third parties, additional warranty terms offered by such third parties to end-users may apply.

  • Open Source Software (i) The Company uses and has used any and all software and other materials distributed under a “free,” “open source,” or similar licensing model (including but not limited to the MIT License, Apache License, GNU General Public License, GNU Lesser General Public License and GNU Affero General Public License) (“Open Source Software”) in compliance with all license terms applicable to such Open Source Software; and (ii) the Company has not used or distributed and does not use or distribute any Open Source Software in any manner that requires or has required (A) the Company to permit reverse engineering of any software code or other technology owned by the Company or (B) any software code or other technology owned by the Company to be (1) disclosed or distributed in source code form, (2) licensed for the purpose of making derivative works or (3) redistributed at no charge.

  • Software License ICS will grant the Business Manager a non-exclusive and royalty-free right and license to use and copy software owned by ICS and to use certain third party software according to the terms of the applicable third party licenses to ICS, all in connection with the Business Manager’s obligations under the Agreement. ICS will provide the Business Manager with all upgrades to the licensed software.

  • Software License Agreement McDATA agrees that all Licensed Software will be distributed to Customers subject to a Software License Agreement (including warranty statement), along with a McDATA Manual, in a manner which is (a) no less protective of BROCADE's Intellectual Property Rights in the Licensed Software than the form attached hereto as Exhibit D, and (b) legally enforceable in the jurisdictions in which the Licensed Software, as incorporated into the McDATA Products, is distributed.

  • Proprietary Software Depending upon the products and services You elect to access through Electronic Access, You may be provided software owned by BNY Mellon or licensed to BNY Mellon by a BNY Mellon Supplier (“Proprietary Software”). You are granted a limited, non-exclusive, non-transferable license to install the Proprietary Software on Your authorized computer system (including mobile devices registered with BNY Mellon) and to use the Proprietary Software solely for Your own internal purposes in connection with Electronic Access and solely for the purposes for which it is provided to You. You and Your Users may make copies of the Proprietary Software for backup purposes only, provided all copyright and other proprietary information included in the original copy of the Proprietary Software are reproduced in or on such backup copies. You shall not reverse engineer, disassemble, decompile or attempt to determine the source code for, any Proprietary Software. Any attempt to circumvent or penetrate security of Electronic Access is strictly prohibited.

Time is Money Join Law Insider Premium to draft better contracts faster.