EQUIPMENT FURNISHED BY CONTRACTOR Sample Clauses

EQUIPMENT FURNISHED BY CONTRACTOR. 1. Only equipment and/or supplies approved by the Sheriff-Coroner shall be used by Contractor, including but not limited, to plastic sheeting. 2. Contractor shall own or maintain at least 5-8 transport vehicles of van or station wagon type. Contractor vehicles shall be in good mechanical working order each time they are dispatched to provide body transport services under this Contract. Contractor vehicles should receive routine mechanical maintenance and repair in a timely manner. Contractor should routinely inspect their vehicles for needed mechanical repairs and maintenance. 3. Each vehicle shall be equipped with non-emergency radio frequency communications between Contractor’s field personnel or vehicle and base station located within the County of Orange. RADIO PAGES DO NOT QUALIFY. 4. Only vehicles with functioning communication equipment shall be dispatched on Coroner’s cases. 5. Vehicles shall be without company name, business logo or any other business advertising message. Bumper stickers will not be permitted. 6. Vehicles shall be kept clean inside and out, and interiors shall be sanitary and free from deleterious odors at all times. 7. Vehicles shall be without significant body, paint and/or other damage. 8. Each vehicle must be equipped with two one-man stretchers with portable cots. All portable cots must be in safe working condition, cleaned and inspected regularly. 9. Vehicles and equipment are subject at any time to inspection by the Sheriff-Coroner or his designated representative, and Contractor may be required to replace or repair defective or substandard equipment within 30 days of notification. In the event that removal of said vehicle from Contractor’s fleet will reduce the number of available vehicles below 5 or it is a safety issue the Contractor must repair immediately. 10. Contractor shall maintain an adequate supply of disposable personal protective equipment (PPE) including, but not limited to, single use gloves, aprons, masks, and eye xxxxxxx. County is not responsible for supplying new or replacement PPE nor the required fit testing for any items used by Contractor. 11. It is recommended that each vehicle be equipped with fifty feet of one-half inch nylon line with tensile strength of at least 5,000 pounds.
AutoNDA by SimpleDocs
EQUIPMENT FURNISHED BY CONTRACTOR. A. Contractor agrees to purchase all equipment for the operation of the Building unless highly specialized equipment. B. Contractor shall furnish the necessary appropriately tested and approved implements, machinery and cleaning supplies for the satisfactory performance of all services required under this Contract. Owner shall approve all of the aforementioned items.

Related to EQUIPMENT FURNISHED BY CONTRACTOR

  • Services to be performed by Contractor In consideration of the payments set forth herein and in Exhibit “B,” Contractor shall perform services for County in accordance with the terms, conditions and specifications set forth herein and in Exhibit “A.”

  • By Contractor Should the Contractor be liable for any payments to the State hereunder, interest, late payment charges and collection fee charges will be determined and assessed pursuant to Section 18 of the State Finance Law.

  • Contract Work Contract work means capital project work within existing plant facilities, major maintenance and/or revamp work, plant modifications and/or shutdown work, minor maintenance and/or repair work, breakdown maintenance.

  • Personnel Equipment and Material Engineer shall furnish and maintain, at its own expense, quarters for the performance of all Engineering Services, and adequate and sufficient personnel and equipment to perform the Engineering Services as required. All employees of Engineer shall have such knowledge and experience as will enable them to perform the duties assigned to them. Any employee of Engineer who, in the reasonable opinion of County, is incompetent or whose conduct becomes detrimental to the Engineering Services shall immediately be removed from association with the Project when so instructed by County. Engineer certifies that it presently has adequate qualified personnel in its employment for performance of the Engineering Services required under this Contract, or will obtain such personnel from sources other than County. Engineer may not change the Project Manager without prior written consent of County.

  • All new supplies equipment and services shall include manufacturer's minimum standard warranty unless otherwise agreed to in writing. Vendor shall be legally permitted to sell all products offered for sale to TIPS Members. All goods proposed and sold shall be new unless clearly stated in writing. The Vendor shall provide timely and accurate customer support for orders to TIPS Members as agreed by the Parties. Vendors shall respond to such requests within a commercially reasonable time after receipt of the request. If support andƒor training is a line item sold or packaged with a sale, support shall be as agreed with the TIPS Member. Most TIPS Members are tax exempt and the related laws andƒor regulations of the controlling jurisdiction(s) of the TIPS Member shall apply. No assignment of Agreement may be made without the prior notification of TIPS. Written approval of TIPS shall not be unreasonably withheld. Payment for delivered goods and services can only be made to the awarded Vendor, Vendor designated reseller or vendor assigned company.

  • Contractor If COUNTY elects to renegotiate this Agreement due to reduced or terminated 20 funding, CONTRACTOR shall not be obligated to accept the renegotiated terms.

  • Equipment and Materials CONTRACTOR shall provide all equipment, materials, and supplies necessary for the performance on the Agreement except:

  • Claim by Contractor After receipt of the Notice of Termination from the state, the Contractor shall submit any claim for additional costs not covered herein or elsewhere in the Contract within 60 days of the effective termination date, and not thereafter. Should the Contractor fail to submit a claim within the 60-day period, the State may, at its sole discretion, based on information available to it, determine what, if any, compensation is due the Contractor and pay the Contractor the determined amount.

  • SERVICES TO BE PROVIDED BY CONSULTANT 1.1 In compliance with all of the terms and conditions of this Agreement, CONSULTANT shall provide to ANAHEIM all labor, materials, tools, equipment, services, and incidental and customary work necessary to fully and adequately supply the professional consulting services necessary for the Services when required by ANAHEIM. The Services are more particularly described in the General Scope of Work attached hereto as Exhibit A and incorporated herein by this reference (“General Scope of Work”). In addition to the General Scope of Work, the Services will also be described in a Request for Work Order Proposal (“RFWOP”) and in a Notice to Proceed, as described in Section 1.4. ANAHEIM may elect to delete certain tasks of the General Scope of Work or the RFWOP at its sole discretion. The Services will not be performed by the CONSULTANT until ANAHEIM selects CONSULTANT in accordance with this Section 1. If selected, CONSULTANT shall perform the Services as directed by ANAHEIM and in accordance with the RFWOP, the Notice to Proceed, and this Agreement. By entering into this Agreement, ANAHEIM does not guarantee CONSULTANT that ANAHEIM will select CONSULTANT to provide any Services under this Agreement. 1.2 When the Services are required, ANAHEIM will issue an RFWOP in writing or electronically for the project-specific Services, including a specific scope of work, schedule for completion of the Services, task specifications, name of the Project Administrator, and other data specific to that RFWOP. CONSULTANT shall submit, within the time stated in the RFWOP, a sealed Work Order Proposal (“Work Order Proposal”) indicating the cost, task completion schedule, and other information requested in that RFWOP. CONSULTANT shall submit an electronic sealed Work Order Proposal when it is required by the RFWOP, and CONSULTANT shall abide by all RFWOP electronic proposal requirements. 1.3 For any RFWOP with an anticipated fee : (i) under $50,000, ANAHEIM will send, in writing or electronically, the RFWOP to one (1) pre-qualified consultant, which may or may not include CONSULTANT; (ii) of $50,000 to $150,000, ANAHEIM will send, in writing or electronically, the RFWOP to up to three (3) pre-qualified consultants, which may or may not include CONSULTANT; (iii) of $150,000 and up to $250,00, ANAHEIM will send, in writing or electronically, the RFWOP to up to five (5) pre-qualified consultants, which may or may not include CONSULTANT. ANAHEIM does not give any guarantee to CONSULTANT that ANAHEIM will send such an RFWOP to CONSULTANT at any point during the term of this Agreement. If (a) ANAHEIM sends CONSULTANT an RFWOP and (b) CONSULTANT desires to be considered for the RFWOP, CONSULTANT shall submit, within the time stated in the RFWOP, a sealed Work Order Proposal indicating the cost, task completion schedule, and other information requested in that RFWOP. CONSULTANT shall submit an electronic sealed Work Order Proposal when it is required by the RFWOP, and CONSULTANT shall abide by all RFWOP electronic proposal requirements. 1.4 Selection of a prequalified consultant to complete the Services requested in any RFWOP shall be based on the criteria set forth herein. ANAHEIM will issue a Notice to Proceed (“Notice”) to the successful consultant who has submitted a Work Order Proposal. The Notice and the RFWOP shall constitute the “Work Order”. If CONSULTANT fails to promptly commence work and/or diligently pursue a Work Order as set forth therein, ANAHEIM may elect to terminate the Work Order or this Agreement. 1.5 CONSULTANT acknowledges that ANAHEIM may enter into agreements similar to this Agreement with other consultants. It is understood and agreed that a Work Order will be awarded to the prequalified consultant most qualified in ANAHEIM's opinion to provide services set forth in the RFWOP within the scheduled completion date based upon the following criteria: .01 Ability of the consultant to perform the specific tasks outlined in the RFWOP; .02 Qualifications of the specific individuals to perform the specific tasks outlined in the RFWOP; .03 Amount and quality of time key personnel will be involved in their respective portions of the Services outlined in the RFWOP; .04 Reasonableness of the fee requested to provide the Services outlined in the RFWOP; .05 Demonstrated record of success by the consultant on work previously performed for ANAHEIM or for other municipalities or enterprises and .06 The specific methods and techniques to be employed by the consultant in providing the Services outlined in the RFWOP. 1.6 In the event of conflicting provisions, the provisions shall govern in the following order: (1) the Notice to Proceed; (2) the RFWOP; (3) CONSULTANT’s Work Order;

  • Contractor’s Equipment Payment for required equipment owned by the Construction Manager or an affiliate of the Construction Manager will be based solely on an hourly rate derived by dividing the current appropriate monthly rate by 176 hours. No payment will be made under any circumstances for repair costs, freight and transportation charges, fuel, lubricants, insurance, any other costs and expenses, or overhead and profit. Payment for such equipment made idle by delays attributable to the Government will be based on one-half the derived hourly rate under this subsection.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!