Excavation and Construction Sample Clauses

Excavation and Construction. Subject to Section 3.3, the Company shall be responsible for obtaining, paying for, and complying with all applicable permits, in the manner required by the laws, ordinances, and regulations of the City. Although the Company shall be responsible for obtaining and complying with the terms of such permits when performing Relocations requested by the City under Section 6.9 of this Franchise and undergrounding requested by the City under Article 11 of this Franchise, the City will not require the Company to pay the fees charged for such permits. Upon the Company submitting a construction design plan, the City shall promptly and fully advise the Company in writing of all requirements for the restoration of City Streets in advance of Company excavation projects in City Streets, based upon the design submitted, if the City’s restoration requirements are not addressed in publicly available standards.
Sample 1Sample 2
AutoNDA by SimpleDocs
Excavation and Construction. The Company shall be responsible for obtaining all applicable permits, including any excavation and/or street cut permits, in the manner required by the laws, ordinances, and regulations of the Town. All public and private property whose use conforms to restrictions in public easements disturbed by Company construction or excavation activities shall be restored by the Company at its expense to substantially its former condition according to then existing Town laws, ordinances, and regulations.
Sample 1Sample 2
Excavation and Construction. The Company shall be responsible for obtaining, paying for, and complying with all applicable permits including, but not limited to, excavation, street closure and street cut permits, in the manner required by the laws, ordinances, and regulations of the City. Although the Company shall be responsible for obtaining and complying with the terms of such permits when performing relocations requested by the City under Section 6.8 of this Franchise and undergrounding requested by the City under Article 11 of this Franchise, the City will not require the Company to pay the fees charged for such permits.
Sample 1Sample 2
Excavation and Construction. The Company shall be responsible for obtaining, paying for, and complying with all applicable permits, in the manner required by the laws, ordinances, and regulations of the City, to the extent consistent with Industry Standards. Upon the Company submitting a construction design plan, the City shall promptly and fully advise the Company in writing of all requirements for the restoration of City Streets in advance of Company excavation projects in City Streets, based upon the design submitted.‌
Sample 1
Excavation and Construction. All excavation and construction work done by the Association shall be done in a timely and expeditious manner which minimizes the inconvenience to the public and individuals and shall comply with duly adopted City laws and regulations. All public and private property whose use s disturbed by Association excavation or construction activities shall be restored by the Association, at its expense, to substantially its former condition within 120 days following completion, provided that the property condition as restored complies with NESC guidelines and applicable law. Reasonable extensions shall be granted by the City for good cause. The Association shall comply with the City's requests for reasonable and prompt action to remedy all damage, except for vegetation management in compliance with this Agreement, to private property adjacent to Streets and Other Public Rights-of Way and Public Utility Easements where the Association is performing construction, excavation, maintenance or repair work. The City reserves the right to restore property and remedy damages caused by Association activities at the expense of the Association in the event the Association fails to perform such work within 120 days after notice from the City and to charge the Association the cost of such restoration and remedial action and such charges shall be paid by the Association to the City within thirty (30) days.
Sample 1
Excavation and Construction. Subject to Section 3.3, the Company shall be responsible for obtaining, paying for, and complying with all applicable permits, in the manner required by the laws, ordinances, and regulations of the Town. Although the Company shall be responsible for obtaining and complying with the terms of such permits when performing Relocations requested by the Town under Section 6.9 of this Franchise, the Town will not require the Company to pay the fees charged for such permits. Upon the Company submitting a construction design plan, the Town shall promptly and fully advise the Company in writing of all requirements for restoration of Town Streets in advance of Company excavation projects in Town Streets, based upon the design submitted, if the Town’s restoration requirements are not addressed in publicly available standards.‌
Sample 1

Related to Excavation and Construction

  • Law; Construction This Agreement and any claim, counterclaim or dispute of any kind or nature whatsoever arising out of or in any way relating to this Agreement (“Claim”), directly or indirectly, shall be governed by, and construed in accordance with, the internal laws of the State of New York.

  • General Construction 20.2.1. Binding Nature.............................................. 20.2.2. Entire Agreement............................................ 20.2.3. Governing Law............................................... 20.2.4. Indulgences Not Waivers..................................... 20.2.5. Titles Not to Affect Interpretation......................... 20.2.6.

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • New Construction If this contract is for a Property that is newly constructed and the new construction option is selected, coverage begins on day one (1) of month thirteen

  • Project Construction The Contractor agrees to provide continuous on-site supervision on each Job Order, while progress on the project is being accomplished. The Contractor’s Project Manager will ensure: 1. Coordination and providing supervision to all Subcontractor and workers; 2. Posting of the prevailing wage scale; 3. Maintaining a copy of the Contractors safety program manual made available to all construction personnel; 4. Conducting weekly on-site safety meetings; 5. Completing the daily labor and construction progress log on a daily basis and submit copies to the County on a daily basis. Copies of the previous day’s reports must be submitted by 9:00AM of the following day. a. Daily labor log is to include a listing of Subcontractor(s) and a count of workers by trade providing services for the day. b. Construction progress log is to include a narrative of the Work provided by trade(s). Narrative agrees to include the various areas of the jobsite where Work was performed and any problems or conditions that were encountered. c. In the event the Contractor fails to provide a daily log and/or construction progress log, the County may impose damages against the Contractor in the amount of fifty dollars ($50.00) for each log and deduct from the Contractor’s payment request, for each day the Contractor does not provide the documentation. 6. County may suspend Contractor operations if no Contractor Superintendent is observed. All delays caused by the suspension will be the responsibility of the Contractor. No time extension or claims for cost(s) associated with the suspension will be granted by the County.

  • ICIF Construction The ICIF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Parties agree on another mutually acceptable deadline, Interconnection Customer shall deliver to Transmission Provider and Transmission Owner “as-built” drawings, information and documents for the ICIF, such as: a one-line diagram, a site plan showing the Generating Facility and the ICIF, plan and elevation drawings showing the layout of the ICIF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer’s step-up transformers, the facilities connecting the Generating Facility to the step-up transformers and the ICIF, and the impedances (determined by factory tests) for the associated step-up transformers and the Generating Facility. Interconnection Customer shall provide Transmission Provider and Transmission Owner with Interconnection Customer’s specifications for the excitation system, automatic voltage regulator, Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

  • DAF Construction The DAF shall be designed and constructed in accordance with Good Utility Practice. Within one hundred twenty (120) Calendar Days after the Commercial Operation Date, unless the Developer and Connecting Transmission Owner agree on another mutually acceptable deadline, the Developer shall deliver to the Connecting Transmission Owner and NYISO “as- built” drawings, information and documents for the DAF, such as: a one-line diagram, a site plan showing the Large Generating Facility and the DAF, plan and elevation drawings showing the layout of the DAF, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Developer’s step-up transformers, the facilities connecting the Large Generating Facility to the step-up transformers and the DAF, and the impedances (determined by factory tests) for the associated step-up transformers and the Large Generating Facility. The Developer shall provide to, and coordinate with, Connecting Transmission Owner and NYISO with respect to proposed specifications for the excitation system, automatic voltage regulator, Large Generating Facility control and protection settings, transformer tap settings, and communications, if applicable.

  • Governing Law; Construction This Agreement and any claim, counterclaim or dispute of any kind or nature whatsoever arising out of or in any way relating to this Agreement (“Claim”), directly or indirectly, shall be governed by, and construed in accordance with, the laws of the State of New York. The section headings in this Agreement have been inserted as a matter of convenience of reference and are not a part of this Agreement.

  • Contract Construction 6.27.1 The parties acknowledge that each party and its counsel have reviewed this CONTRACT and that the normal rule of construction to the effect that any ambiguities are to be resolved against the drafting party shall not be employed in the interpretation of this CONTRACT or any amendment or exhibits hereto.

  • Commencement of Construction Construction of the Project will start within thirty (30) days after notification to the Developer by the Owner, or as soon thereafter as weather and ground conditions permit.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!