Field Survey, Base Mapping, and Data Collection Sample Clauses

Field Survey, Base Mapping, and Data Collection a. Collect available data and inspect all features of the trail route. b. Hold a Project Kick-off Meeting with the towns’ representatives to discuss goals and review initial ideas. c. Supplement available mapping and plans with on-the-ground survey as needed to establish ground control, and to locate on the plan existing features and conditions including rails, culverts, bridges, limits of vegetation, foot paths, walks, drives, parking lots, streets, walls, curbing, structures, fences, manholes, hydrants, utility poles, water lines, sewer lines, utility lines, drainage lines, and other physical features above and below ground. d. Establish existing ROW lines and property boundaries/ownership from available maps and plans, and field verify. e. Provide cross-sections at 50-foot station intervals where needed. f. Create an electronic base plan and plot all information on 24”x36” (or roll plans) reproducible mylars at 1”=40’ for plans and appropriate scale for cross sections and profiles. g. Include an appropriate allowance of time for a boring crew to perform soil tests, borings, and pavement cores where needed. The Consultant shall not conduct any borings without prior permission by the respective towns’ Manager or Administrator and the affected property owner! h. Collect and review available wetland mapping. Meet on site with town’s Conservation Commission representatives to view wetland areas and limits. Establish wetland boundaries/resource delineation as may be required by the Conservation Commission. Include approximate wetland limits on base plan. i. Collect traffic data at major street crossings and in areas of on street trail routing as required or advised by MassHighway, and as generally necessary to determine prudent safeguards for trail users and motorists.
AutoNDA by SimpleDocs

Related to Field Survey, Base Mapping, and Data Collection

  • Data Collection, Processing and Usage The Company collects, processes and uses the International Participant’s personal data, including the International Participant’s name, home address, email address, and telephone number, date of birth, social insurance number or other identification number, salary, citizenship, job title, any shares of Common Stock or directorships held in the Company, and details of all Equity Awards or any other equity compensation awards granted, canceled, exercised, vested, or outstanding in the International Participant’s favor, which the Company receives from the International Participant or the Employer. In granting the Equity Award under the Plan, the Company will collect the International Participant’s personal data for purposes of allocating shares of Common Stock and implementing, administering and managing the Plan. The Company’s legal basis for the collection, processing and usage of the International Participant’s personal data is the International Participant’s consent.

  • Data Collection The grant recipient will be required to provide performance data reports on a schedule delineated within Section A of this contract, Specific Terms and Conditions.

  • Data Loss Prevention DST shall implement a data leakage program that is designed to identify, detect, monitor and document Fund Data leaving DST’s control without authorization in place.

  • Billing and Collection On behalf of and for the account of ---------------------- Provider, Service Company shall establish and maintain credit and billing and collection policies and procedures, and shall exercise reasonable efforts to xxxx and collect in a timely manner all professional and other fees for all billable Dental Care provided by Dental Care Professionals, including any such fees paid directly to Provider by Service Company pursuant to the then-current Membership Agreement (or similar agreement for providing professional services to dental plans) between Service Company and Provider. Service Company shall advise and consult with Provider regarding the fees for Dental Care provided by Provider (including any related discounting policy); it being understood, however, that Provider's consent shall be necessary to establish the fees (subject to (S)3.2(d), above) to be charged for Dental Care. In connection with the billing and collection services to be provided hereunder, Provider hereby grants to Service Company, throughout the Term (and thereafter as provided in (S)8.3), an exclusive special power of attorney and appoints Service Company as Provider's exclusive true and lawful agent and attorney-in-fact, and Service Company hereby accepts such special power of attorney and appointment, for the following purposes: (a) To xxxx Provider's patients, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, for all billable Dental Care provided by or on behalf of Provider to patients. (b) To xxxx, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, all claims for reimbursement or indemnification from insurance companies and plans, all state or federally funded dental benefit plans, and all other third party payors or fiscal intermediaries for all covered billable Dental Care provided by or on behalf of Provider to patients. (c) To collect and receive, in either Provider's or Service Company's name (as Service Company deems appropriate) and on Provider's behalf, all accounts receivable generated by such xxxxxxxx and claims for reimbursement, to administer such accounts including, but not limited to, extending the time of payment of any such accounts for cash, credit or otherwise; discharging or releasing the obligors of any such accounts; suing, assigning or selling at a discount such accounts to collection agencies; or taking other measures to require the payment of any such accounts; provided, however, that extraordinary collection measures, such as filing lawsuits, discharging or releasing obligors shall not be undertaken without Provider Consent. (d) To deposit all amounts collected into the Provider Account. Provider shall transfer and deliver to Service Company all funds received by Provider from patients or third party payors for Dental Care. Upon receipt by Service Company of any funds from patients or third party payors or from Provider for Dental Care pursuant to this agreement, Service Company shall promptly deposit the same into the Provider Account. (e) To take possession of, endorse in the name of Provider, and deposit into the Provider Account any notes, checks, money orders, insurance payments, and any other instruments received in payment of accounts receivable for Dental Care. (f) To sign checks, drafts, bank notes or other instruments on behalf of Provider, and to make withdrawals from the Provider Account for payments specified in this agreement and otherwise as agreed upon from time to time by the Parties. Upon request of Service Company, Provider shall execute and deliver to the financial institution at which the Provider Account is maintained such additional documents or instruments as Service Company may reasonably request to evidence or effect the special power of attorney granted to Service Company by Provider pursuant to this section and (S)4.12. The special power of attorney granted herein is coupled with an interest and shall be irrevocable except with Service Company's written consent. The irrevocable power of attorney shall expire when this agreement has been terminated, all accounts receivable purchased by Service Company pursuant to (S)7.7, if any, have been collected, and all amounts due to Service Company as described in Article VII have been paid.

  • Contractor Sales Reporting Vendor Management Fee Contractor Reports Master Contract Sales Reporting. Contractor shall report total Master Contract sales quarterly to Enterprise Services, as set forth below. Master Contract Sales Reporting System. Contractor shall report quarterly Master Contract sales in Enterprise Services’ Master Contract Sales Reporting System. Enterprise Services will provide Contractor with a login password and a vendor number. The password and vendor number will be provided to the Sales Reporting Representative(s) listed on Contractor’s Bidder Profile. Data. Each sales report must identify every authorized Purchaser by name as it is known to Enterprise Services and its total combined sales amount invoiced during the reporting period (i.e., sales of an entire agency or political subdivision, not its individual subsections). The “Miscellaneous” option may be used only with prior approval by Enterprise Services. Upon request, Contractor shall provide contact information for all authorized purchasers specified herein during the term of the Master Contract. If there are no Master Contract sales during the reporting period, Contractor must report zero sales. Due dates for Master Contract Sales Reporting. Quarterly Master Contract Sales Reports must be submitted electronically by the following deadlines for all sales invoiced during the applicable calendar quarter: March 31: April 30 June 30: July 31 September 30: October 31 December 31: January 31 Vendor Management Fee. Contractor shall pay to Enterprise Services a vendor management fee (“VMF”) of 1.50 percent on the purchase price for all Master Contract sales (the purchase price is the total invoice price less applicable sales tax). The sum owed by Contractor to Enterprise Services as a result of the VMF is calculated as follows: Amount owed to Enterprise Services = Total Master Contract sales invoiced (not including sales tax) x .0150. The VMF must be rolled into Contractor’s current pricing. The VMF must not be shown as a separate line item on any invoice unless specifically requested and approved by Enterprise Services. Enterprise Services will invoice Contractor quarterly based on Master Contract sales reported by Contractor. Contractors are not to remit payment until they receive an invoice from Enterprise Services. Contractor’s VMF payment to Enterprise Services must reference this Master Contract number, work request number (if applicable), the year and quarter for which the VMF is being remitted, and the Contractor’s name as set forth in this Master Contract, if not already included on the face of the check. Failure to accurately report total net sales, to submit a timely usage report, or remit timely payment of the VMF, may be cause for Master Contract termination or the exercise of other remedies provided by law. Without limiting any other available remedies, the Parties agree that Contractor’s failure to remit to Enterprise Services timely payment of the VMF shall obligate Contractor to pay to Enterprise Services, to offset the administrative and transaction costs incurred by the State to identify, process, and collect such sums. The sum of $200.00 or twenty-five percent (25%) of the outstanding amount, whichever is greater, or the maximum allowed by law, if less. Enterprise Services reserves the right, upon thirty (30) days advance written notice, to increase, reduce, or eliminate the VMF for subsequent purchases, and reserves the right to renegotiate Master Contract pricing with Contractor when any subsequent adjustment of the VMF might justify a change in pricing. Annual Master Contract Sales Report. Upon request, Contractor shall provide to Enterprise Services a detailed annual Master Contract sales report. Such report shall include, at a minimum: Product description, part number or other Product identifier, per unit quantities sold, and Master Contract price. This report must be provided in an electronic format that can be read by compatible with MS Excel. Small Business Inclusion. Upon Request by Enterprise Services, Contractor shall provide, within thirty (30) days, an Affidavit of Amounts Paid. Such Affidavit of Amounts Paid either shall state, if applicable, that Contractor still maintains its MWBE certification or state that its subcontractor(s) still maintain(s) its/their MWBE certification(s) and specify the amounts paid to each certified MWBE subcontractor under this Master Contract. Contractor shall maintain records supporting the Affidavit of Amounts Paid in accordance with this Master Contract’s records retention requirements.

  • Traffic Measurement and Billing over Interconnection Trunks 6.1 For billing purposes, each Party shall pass Calling Party Number (CPN) information on at least ninety-five percent (95%) of calls carried over the Interconnection Trunks. 6.1.1 As used in this Section 6, “Traffic Rate” means the applicable Reciprocal Compensation Traffic rate, Measured Internet Traffic rate, intrastate Switched Exchange Access Service rate, interstate Switched Exchange Access Service rate, or intrastate/interstate Tandem Transit Traffic rate, as provided in the Pricing Attachment, an applicable Tariff, or, for Measured Internet Traffic, the FCC Internet Order. 6.1.2 If the originating Party passes CPN on ninety-five percent (95%) or more of its calls, the receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. For any remaining (up to 5%) calls without CPN information, the receiving Party shall xxxx the originating Party for such traffic at the Traffic Rate applicable to each relevant minute of traffic, in direct proportion to the minutes of use of calls passed with CPN information. 6.1.3 If the originating Party passes CPN on less than ninety-five percent (95%) of its calls and the originating Party chooses to combine Reciprocal Compensation Traffic and Toll Traffic on the same trunk group, the receiving Party shall xxxx the higher of its interstate Switched Exchange Access Service rates or its intrastate Switched Exchange Access Services rates for all traffic that is passed without CPN, unless the Parties agree that other rates should apply to such traffic. 6.2 At such time as a receiving Party has the capability, on an automated basis, to use such CPN to classify traffic delivered over Interconnection Trunks by the other Party by Traffic Rate type (e.g., Reciprocal Compensation Traffic/Measured Internet Traffic, intrastate Switched Exchange Access Service, interstate Switched Exchange Access Service, or intrastate/interstate Tandem Transit Traffic), such receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. If the receiving Party lacks the capability, on an automated basis, to use CPN information on an automated basis to classify traffic delivered by the other Party by Traffic Rate type, the originating Party will supply Traffic Factor 1 and Traffic Factor

  • Billing and Collection Customers BellSouth currently has in effect numerous billing and collection agreements with various interexchange carriers and billing clearing houses and as such these billing and collection customers (“B&C Customers”) query BellSouth’s LIDB to determine whether to accept various billing options from End Users. Until such time as BellSouth implements in its LIDB and its supporting systems the means to differentiate Lightyear’s data from BellSouth’s data, the following shall apply: (1) Lightyear will accept responsibility for telecommunications services billed by BellSouth for its B&C Customers for Lightyear’s End User accounts which are resident in LIDB pursuant to this Agreement. Lightyear authorizes BellSouth to place such charges on Lightyear’s xxxx from BellSouth and shall pay all such charges, including, but are not limited to, collect and third number calls. (2) Charges for such services shall appear on a separate BellSouth xxxx xxxx identified with the name of the B&C Customers for which BellSouth is billing the charge. (3) Lightyear shall have the responsibility to render a billing statement to its End Users for these charges, but Lightyear shall pay BellSouth for the charges billed regardless of whether Lightyear collects from Lightyear’s End Users. (4) BellSouth shall have no obligation to become involved in any disputes between Lightyear and B&C Customers. BellSouth will not issue adjustments for charges billed on behalf of any B&C Customer to Lightyear. It shall be the responsibility of Lightyear and the B&C Customers to negotiate and arrange for any appropriate adjustments.

  • Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.

  • Contract Closure Contracting Officer shall give appropriate written notice to Purchaser when Purchaser has complied with the terms of this contract. Purchaser shall be paid refunds due from Timber Sale Account un- der B4.24 and excess cooperative deposits under B4.218.

  • Statewide HUB Program Statewide Procurement Division Note: In order for State agencies and institutions of higher education (universities) to be credited for utilizing this business as a HUB, they must award payment under the Certificate/VID Number identified above. Agencies, universities and prime contractors are encouraged to verify the company’s HUB certification prior to issuing a notice of award by accessing the Internet (xxxxx://xxxxx.xxx.xxxxx.xx.xx/tpasscmblsearch/index.jsp) or by contacting

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!