Finalizing Elements and Standards Sample Clauses

Finalizing Elements and Standards. A. Prior to finalization of critical elements and performance standards, copies of the performance standards and critical elements developed in Section 2 above will be sent to the NTEU National Office. B. Copies of the proposed critical elements and performance standards will be sent to affected employees for comments. A notice of the right to request a meeting to explain the language in the new elements and standards will be attached. Employees will be reminded that they have a right to submit written comments on the proposed critical elements and performance standards. (Upon request, a group meeting will be held to answer all relevant questions posed by the employees in the work group.) Supervisors of work groups composed of field employees may opt to have individual, rather than group meetings. Employees will be granted up to two (2) hours of administrative time to prepare written comments. Employees shall submit their comments to their immediate supervisors within fifteen (15) calendar days of the meeting. C. Supervisors shall submit employee comments, along with their own comments, on positions under their supervision, to the HR Service Provider. D. Management officials will review comments submitted under B and C above and provide notice to the National Office of NTEU of the final performance standards and critical elements, along with copies of employee comments. Such notice shall be provided consistent with the requirement of Article 39, Mid-Term Bargaining. E. NTEU may request a meeting to be held within five (5) days of their receipt of the material in D above with the HR Service Provider to voice their concerns, if any, on behalf of the employees.
Sample 1
AutoNDA by SimpleDocs

Related to Finalizing Elements and Standards

  • Specifications and Standards a) All articles supplied shall strictly conform to the specifications, trademark laid down in the bidding document and wherever articles have been required according to ISI/ ISO/ other applicable specifications/ certifications/ standards, those articles should conform strictly to those specifications/ certifications/ standards. The supply shall be of best quality and description. The decision of the competent authority/ purchase committee whether the articles supplied conforms to the specifications shall be final and binding on the supplier/ selected bidder.

  • Design Criteria and Standards All Projects/Services shall be performed in accordance with instructions, criteria and standards set forth by the Director.

  • LICENSES AND STANDARDS 11 CONTRACTOR warrants that it and its personnel, described in Paragraph 27 of 12 this Agreement, who are subject to individual registration and/or licensing requirements, have all 13 necessary licenses and permits required by the laws of the United States, State of California 14 (hereinafter referred to as “State”), County of Orange, and all other appropriate governmental 15 agencies to perform the services described in this Agreement, and agrees to maintain, and require 16 its personnel to maintain, these licenses and permits in effect for the duration of this Agreement.

  • Geographic Area and Sector Specific Allowances, Conditions and Exceptions The following allowances and conditions shall apply where relevant. Where the Employer does work which falls under the following headings, the Employer agrees to pay and observe the relevant respective conditions and/or exceptions set out below in each case.

  • Regulatory Requirements and Governing Law 43 14.1 Regulatory Requirements. 43 14.2 Governing Law 44 ARTICLE 15. NOTICES 44 15.1 General. 44 15.2 Xxxxxxxx and Payments. 44 15.3 Alternative Forms of Notice 44 15.4 Operations and Maintenance Notice 44 ARTICLE 16. FORCE MAJEURE 45 16.1 Force Majeure 45 ARTICLE 17. DEFAULT 45 17.1 Default. 45 ARTICLE 18. INDEMNITY, CONSEQUENTIAL DAMAGES AND INSURANCE 46 18.1 Indemnity. 46 18.2 No Consequential Damages. 47 18.3 Insurance 47 ARTICLE 19. ASSIGNMENT 49 19.1 Assignment. 49 ARTICLE 20. SEVERABILITY 49 20.1 Severability. 49 ARTICLE 21. COMPARABILITY 50 21.1 Comparability. 50 ARTICLE 22. CONFIDENTIALITY 50 22.1 Confidentiality. 50 ARTICLE 23. ENVIRONMENTAL RELEASES 53 23.1 Developer and Connecting Transmission Owner Notice 53 ARTICLE 24. INFORMATION REQUIREMENT 53 24.1 Information Acquisition. 53 24.2 Information Submission by Connecting Transmission Owner 54 24.3 Updated Information Submission by Developer 54 24.4 Information Supplementation 54 ARTICLE 25. INFORMATION ACCESS AND AUDIT RIGHTS 55 25.1 Information Access. 55 25.2 Reporting of Non-Force Majeure Events. 55 25.3 Audit Rights. 56 25.4 Audit Rights Periods. 56 25.5 Audit Results. 56 ARTICLE 26. SUBCONTRACTORS 56 26.1 General. 56 26.2 Responsibility of Principal. 57 26.3 No Limitation by Insurance 57 ARTICLE 27. DISPUTES 57 27.1 Submission 57 27.2 External Arbitration Procedures. 57 27.3 Arbitration Decisions. 58 27.4 Costs. 58 27.5 Termination 58 ARTICLE 28. REPRESENTATIONS, WARRANTIES AND COVENANTS 58 28.1 General. 58 ARTICLE 29. MISCELLANEOUS 59 29.1 Binding Effect. 59 29.2 Conflicts. 59 29.3 Rules of Interpretation 59 29.4 Compliance 60 29.5 Joint and Several Obligations. 60 29.6 Entire Agreement. 60 29.7 No Third Party Beneficiaries. 60 29.8 Waiver 60 29.9 Headings. 61 29.10 Multiple Counterparts. 61 29.11 Amendment. 61 29.12 Modification by the Parties. 61 29.13 Reservation of Rights. 61 29.14 No Partnership 62 29.15 Other Transmission Rights. 62 Appendices STANDARD LARGE GENERATOR INTERCONNECTION AGREEMENT THIS STANDARD LARGE GENERATOR INTERCONNECTION AGREEMENT

  • GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.

  • Service Level Standards In addition to all other requirements in this Agreement, and in accordance with the Best Claims Practices & Estimating Guidelines, Vendor shall use reasonable and good faith efforts to meet the Service Level Standards set forth below.

  • Design Standards Most recent edition of the “Owner’s Design Standards,” including any partial updates as may be directed by the Owner.

  • Governance and Anticorruption The Borrower, the Project Executing Agency, and the implementing agencies shall (a) comply with ADB’s Anticorruption Policy (1998, as amended to date) and acknowledge that ADB reserves the right to investigate directly, or through its agents, any alleged corrupt, fraudulent, collusive or coercive practice relating to the Project; and

  • Technical Standards The Generation System shall be installed and operated by the Interconnection Customer consistent with the requirements of this Agreement; the Technical Requirements; the applicable requirements located in the National Electrical Code (NEC); the applicable standards published by the American National Standards Institute (ANSI) and the Institute of Electrical and Electronic Engineers (IEEE); and local building and other applicable ordinances in effect at the time of the installation of the Generation System.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!