Flare Sample Clauses

Flare. A flare is a display with the state gaming stamp affixed which describes a punchboard, sports-pool board, calcutta board, deal of pull tabs, club special, tip board, prize board, seal board, and raffle board. The flare for a punchboard is its face sheet. A flare for a sports-pool board, calcutta board, prize board, club special, tip board, seal board, and raffle board is the game board.
Flare. Xxxxx agrees to indemnify, defend, and hold harmless Customer and its Representatives from and against any third-party Losses resulting from an IP Claim. The foregoing indemnification obligation does not apply to any IP Claims to the extent it arises from or relates to Customer’s breach of the Agreement, including the unauthorized use of the Flare Platform, modifications to the Services not made or authorized by Flare, or any combination of the Services with Third- Party Services.
Flare. Using an enterprise and entrepreneurship model focusing on partnerships with SMEs and role models this new initiative is designed to engage with young men in Year 10 encouraging them to consider the widest range of career possibilities to ensure they reach their full potential. Developed in partnership with our Students’ Union and a Working Group that has drawn in academic colleagues, this event will aim to challenge and break down the barriers and perceptions surrounding progression to further and Higher Education as well as exploring the breadth of courses and curricula available in HE.
Flare. Flare represents and warrants that the (a) Services will be performed in a professional and workmanlike manner, substantially in accordance with the Documentation, and (b) the Flare Platform is not, to the best of Flare’s knowledge, in violation of a third party’s copyright, patent or trademarks (an “IP Claim”). In the event of an IP Claim, Customer’s sole remedy will be, at Flare’s option, to (i) modify the Flare Platform to render it non-infringing; (ii) obtain a licence for Customer’s continued use of the Flare Platform, or (iii) terminates the Order Form(s) and refund any prepaid, unused Fees corresponding to the remaining time in the Subscription Term.
Flare. BCP shall allow BCI to vent process waste gas from ------ Formaldehyde Plant Number 1 (which is one of the Acquired Plants) into the cold box flare system for the BCP Plant at the approximate tie-in locations shown on Exhibit B. BCP, at its cost and expense, shall maintain the flare system in good condition and repair, in accordance with past practices, up to the point of BCI's tie-ins. The BCP flare system shall be made available to BCI on the terms set forth in Exhibit C.

Related to Flare

  • Gas If Customer has selected a Gas Fixed Rate, Customer’s Price will be based on the Fixed Rate(s), plus the Administration Charge, set forth in the Application, which includes RITERATE ENERGY’s compressor fuel and transportation charges, administrative and transaction costs and the Gas Balancing Amount and any Regulatory Charges (defined below).

  • Wet Weather In the event of wet weather, work in the open will continue until the particular work in hand can no longer be done safely and efficiently. Whilst it is raining, employees will be required to: Continue to work under cover or relocate to alternative work under cover, on site. Obtain materials and services for employees working under cover where there is only minimal exposure to inclement weather. When required, perform emergency and safety work. In addition, work on unexpected breakdowns, which can be corrected in limited time duration. Should a portion of the project be affected by wet weather, all other employees not so affected shall continue working in accordance with award conditions, regardless that some employees may be entitled to cease work due to wet weather. If a halt to productive work occurs due to inclement weather, the parties agree that employees may be relocated to other unaffected sites. Where the above steps are not possible, affected employees may be required to attend tool box meetings, work planning sessions or skills development activities, all of which will count as productive time for payment purposes.

  • Inclement Weather 16.1 The parties are committed to working together to minimize the impact of inclement weather. The employer will ensure reasonable allowance is included in contracts taking into account historic weather conditions and forecast rainfall. 16.2 Inclement weather means the existence of rain or abnormal climatic conditions (whether hail, extreme cold, high wind, severe dust storm, extreme heat (as defined in clause 14), poor air quality (as defined in clause 15), or the like or any combination of these conditions) where it is not reasonable or it is unsafe for employees to continue working in those conditions. 16.3 The employer or its representative, when requested by the employees or their representative, must confer within a reasonable time (which does not exceed 60 minutes) for the purpose of determining whether or not the conditions referred to in clause 16.2 apply. 16.4 The time work stops due to inclement weather and the resumption of work after a period of inclement weather has ended will be recorded by the employer. 16.5 When inclement weather conditions exist, an affected employee is not required to start or continue to work where it is unreasonable or unsafe to do so. In cases where emergency work is required or it is necessary to complete a concrete pour already commenced to a practical stage, work may occur or continue provided that such work does not give rise to a reasonable concern on the part of an employee undertaking the work of an imminent risk to their health or safety. 16.6 Where emergency work or a concrete pour is completed in accordance with clause 16.5, work will be paid at the rate of 200% of the ordinary hourly rate calculated to the next hour, and in the case of wet weather, the employee will be provided with adequate wet weather gear. If an employee’s clothes become wet as a result of working in the rain the employee will be allowed to go home for the remainder of the day without loss of pay. 16.7 Where an employee is not able to perform any work at any location because of inclement weather, the employee will receive payment at the ordinary hourly rate for ordinary hours. Payment for time lost due to inclement weather is subject to a maximum of 32 hours pay in any 4-week period for each employee. Payment is subject to adherence to the terms of clause 16. 16.8 An employee working on a Job Share arrangement pursuant to clause 30—Job Share, that is affected by inclement weather, will be entitled to payment from the 32-hour inclement weather bank on a pro rata basis. 16.9 Employees accumulated inclement weather bank shall not be deducted whilst they remain on site. 16.10 Inclement weather occurring during overtime will not be taken into account for the purposes of clause 16 and employees will not be entitled to any payment for stoppages because of inclement weather that occurs outside of ordinary hours. 16.11 Employees on a portion of a site not affected by inclement weather must continue to work even though employees working on other areas of the site may have stopped work because of inclement weather. 16.12 Subject to the availability of alternative work in an employee’s classification, an employer may require employees to transfer: (a) from a location on a site where it is unreasonable and/or unsafe to work because of inclement weather, to another area on the same site, where it is reasonable and safe to work; and/or (b) from a site where it is unreasonable and/or unsafe to work because of inclement weather, to another site, where it is reasonable and safe to work, and where the employer, where necessary, provides transport. 16.13 Remaining on site where, because of inclement weather, the employees are prevented from working: (a) for more than an accumulated total of 4 hours of ordinary time in any one day; or (b) after the main meal break, for more than half of the ordinary work time; or (c) during the final 2 hours of the normal workday for more than an accumulated total of one hour; the employer will not be entitled to require the employees to remain on site beyond the expiration of any of the above circumstances. However, where genuine training has been agreed in writing between the parties, then the course maybe completed in extraordinary circumstances. 16.14 Where the employees are in the sheds, because they have been rained off, or because it is at starting time, morning tea, or lunch time, and it is raining, they will not be required to go to work in a dry area or to be transferred to another site unless: (a) the rain stops; or (b) a covered walkway has been provided; or (c) the sheds are under cover and the employees can get to the dry area without going through the rain; or (d) adequate protection is provided. 16.15 Protection must, where necessary, be provided for the employees’ tools.

  • Safety Glasses Section 1. The City shall supply prescription safety glasses with plastic lenses to employees who are required to wear safety glasses and who are members of the classifications contained in Appendix C to this contract. Safety glasses which are authorized must be industrial grade safety glasses which meet or exceed the requirements of ANSI Specification Z87. 1. All employees who are required to wear safety glasses shall also be required to wear side xxxxxxx, either permanent or snap-on, whenever an eye hazard exists. Solid tinted glasses will not be approved unless required by prescription. Photogray, progressive, scratch coating and/or anti-glare lenses may be considered for those employees who primarily work outdoors or as prescribed. In the event that additional classes are identified as needing either prescription safety glasses or protective eyewear, such classes may be added to the classification list in Appendix C upon approval of PAGE and the City. Section 2. The City agrees to pay the full cost of required prescription safety glasses, with frames not to exceed $75.00. This excludes the cost of the eye examination which will be the responsibility of the employee. The effected employees will be allowed one (1) replacement of safety glasses every two (2) years. In the event the safety glasses become lost, unserviceable, or broken on the job, the employee must present a written request for replacement to the Department Head and Human Resources Director. If the employee breaks his safety glasses while on the job, the Department shall replace the glasses at no cost to the employee. The replacement of lost glasses or glasses that are broken off the job will be at the discretion of the Department Head and Human Resources Director. If an employee has been provided safety glasses by the City, the employee shall be permitted to retain possession of the glasses after separation from the City without reimbursing the City for any costs associated with the glasses. Section 3. An employee who is required to wear prescription safety glasses must present a written request to his department head or designated representative. Section 4. The employee must obtain a current prescription and the employee is authorized the use of sick leave not to exceed two (2) hours to accomplish this examination. The employee will obtain a purchase order from the Department Head prior to ordering the safety glasses. The employee will present the purchase order to the appropriate vendor when ordering. The vendor will contact the appropriate Department Head when the glasses are ready for delivery. The Department Head will then notify the employee who will present himself at the vendor for fitting and pickup. Section 5. In the event a probationary employee has been issued safety glasses and terminates his employment with the City for any reason during the probationary period, he shall be required to reimburse the City for any expenses incurred in the purchase of safety glasses.

  • Fuel The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 per litre (which includes a service component).

  • Welding Welding and use of cutting torches or cutoff saws will be permitted only in areas that have been cleared or are free of all material capable of carrying fire. Flammable debris and vegetation must be removed from within a minimum 10-foot radius of all welding and cutting operations. A shovel and a 5-gallon standard backpack water container filled and with handpump attached shall be immediately available for use in the event of a fire start. C8.64 – DEBARMENT AND SUSPENSION CERTIFICATION (3/18). Pursuant to 2 CFR 180 and 2 CFR 417, Purchaser shall certify and obtain certifications from its Subcontractors regarding debarment, suspension, ineligibility, and voluntary exclusion, including additional Subcontractors obtained after award of this contract. “Subcontractors” are participants in lower tier covered transactions. Purchaser may rely upon a certification of a prospective Subcontractor that it is not proposed for debarment under 48 CFR 9.4, debarred, suspended, ineligible, or voluntarily excluded from participating in covered transactions or timber sales, unless Purchaser knows that the certification is erroneous. Purchaser shall keep the certifications of its Subcontractors on file until timber sale Termination Date and any extensions thereof, and will provide a copy at the written request of Contracting Officer. Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render in good faith the certification required by this Subsection. The knowledge and information of Purchaser is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. If Purchaser knowingly enters into a timber sale transaction with a person who is proposed for debarment under 48 CFR 9.4, suspended, debarred, ineligible, or voluntarily excluded from participation in covered transactions or timber sales, in addition to other remedies available to the Government, Forest Service may pursue available remedies, including suspension and/or debarment. Contracting Officer shall provide a copy of Forms AD-1047 Certification Regarding Debarment, Suspension and Other Responsibility Matters – Primary Covered Transactions and AD-1048 Certification Regarding Debarment, Suspension, Ineligibility and Voluntary Exclusion – Lower Tier Covered Transactions to the Purchaser. Purchaser shall complete form AD-1047 and provide to the Contracting Officer upon request. Purchaser shall require each subcontractor to complete form AD-1048 and provide to the Contracting Officer upon request.

  • Generators Temporary installation of generators, and permanent installation of generators that are placed inside existing buildings or that occupy an area under 50 square feet behind the building they serve.

  • Intake Intake begins when you, or someone on your behalf, contacts the LIFE Provider or the Independent Enrollment Broker expressing interest in services. If it appears from this first conversation that you are potentially eligible, a LIFE Provider and Independent Enrollment Broker representative will contact you to explain the program, obtain further information about you, and to schedule in person or tele-visits. During these visits: • You will learn how the LIFE Program works, the services LIFE offers, and the answers to any questions you may have about LIFE. • The LIFE Provider and/or Independent Enrollment Broker will explain that if you enroll, you must agree that all of your healthcare services will be provided and/or coordinated by LIFE, including primary care and specialist physician services (other than emergency services). • The LIFE Provider will have you sign a release allowing the LIFE Provider to obtain your past medical records so the LIFE health team can fully assess your health conditions. You will be encouraged to visit the LIFE Center to see what it is like. If you are interested in enrolling, a LIFE Provider representative and the Independent Enrollment Broker will assist you with the enrollment process. You should be prepared to participate in phone calls and/or visits with both the LIFE Provider and Independent Enrollment Broker in order to complete your enrollment process.

  • Metering The Interconnection Customer shall be responsible for the Connecting Transmission Owner’s reasonable and necessary cost for the purchase, installation, operation, maintenance, testing, repair, and replacement of metering and data acquisition equipment specified in Attachments 2 and 3 of this Agreement. The Interconnection Customer’s metering (and data acquisition, as required) equipment shall conform to applicable industry rules and Operating Requirements.

  • Speed The relative importance we attach is “high”.