Instrument Tradesperson - Complex Systems Sample Clauses

Instrument Tradesperson - Complex Systems. (i) An instrument (mechanical or electrical) tradesperson who is mainly engaged in installing, repairing, maintaining, servicing, testing, modifying, commissioning, calibrating and fault finding instruments which make up a complex control system which utilises some combination of electrical, electronic, mechanical, hydraulic and pneumatic principles, including work on complex digital and/or analogue control systems utilising integrated circuits. (ii) To be classified as an Instrument Tradesperson - Complex Systems, a tradesperson will have: (1) had a minimum of two years on the job experience as a tradesperson working predominantly on complex and/or intricate instruments and instrument systems, as will enable them to perform such work under minimum supervision and technical guidance; and (2) satisfactorily completed an appropriate post trade course equivalent to at least two years part time study or has achieved to the satisfaction of the employer, a comparable standard of skill and knowledge by other means including in-house training or on the job experience referred to in (1) above.
AutoNDA by SimpleDocs
Instrument Tradesperson - Complex Systems. An instrument tradesperson who is mainly engaged in installing, repairing, maintaining, servicing testing, modifying, commissioning, calibrating and fault finding instruments which make up a complex control system which utilises some combination of electrical, electronic, mechanical, hydraulic and pneumatic principles, including work on complex digital and/or analogue control systems utilising integrated circuits. To be classified as an Instrument Tradesperson - Complex Systems, a tradesperson will have: (i) had a minimum of two years on-the-job experience as a tradesperson working predominantly on complex and/or intricate instruments and instrument systems, as will enable them to perform such work under minimum supervision and technical guidance; and (ii) satisfactorily completed an appropriate post trade course equivalent to at least two years part time study or has achieved to the satisfaction of the employer, a comparable standard of skill and knowledge by other means including in-house training or on-the- job experience referred to in (i) above.
Instrument Tradesperson - Complex Systems i. An instrument (mechanical or electrical) tradesperson who is mainly engaged in installing, repairing, maintaining, servicing, testing, modifying, commissioning, calibrating and fault-finding instruments which make up a complex control system which utilises some combination of electrical, electronic, mechanical, hydraulic and pneumatic principles, including work on complex digital and/or analogue control systems utilising integrated circuits.

Related to Instrument Tradesperson - Complex Systems

  • Mastectomy Services Inpatient

  • SKILLED TRADES Note: The provisions of the Collective Agreement shall apply to the skilled trades except as altered by the provisions of this Article. 30.01 Skilled trade classifications for the purpose of this Collective Agreement will be as follows: 30.02 Seniority shall be by skilled trade classification, that is classifications will be non-interchangeable. 30.03 Employees entering a skilled trade classification shall have a seniority date as of the entry into such classification (including the apprenticeship period if such period was served in the Company). 30.04 A non-skilled trades (i.e. production) employee will not exercise his or her seniority rights in any skilled trade classification, nor will any skilled trades employee exercise seniority in any production classification after the date of ratification except as set forth in Article 31.07(d). 30.05 In the event that a skilled trades employee (i.e. apprentice or journeyman) is unable to perform his or her job as defined in Article 18, the provisions of Article 18 will apply. In no event will these provisions contravene the Human Rights Code. 30.06 The term 'journeyman' as used in this Article shall mean any person: (a) Who presently is in a skilled trades classification; or (b) Who has served a bona fide apprenticeship and has a certificate which substantiates his/her claim of such service; or (c) Who has had eight (8) years of practical experience and can prove same with proper affidavits. The Company will consider the possession of a CAW/UAW journeyman/woman card as presumptive proof of qualifications. 30.07 In the event of a reduction in the work force of any skilled trades classification, the following procedure will apply: (a) First, probationary journeyman within a classification shall be laid off; (b) Second, apprentices within a classification shall be laid off based upon the first to go will be the last who entered the program; (c) Third, if further reductions in a skilled trades classification are required, journeyman shall, in reverse order of seniority (junior employee first) in such a classification, be laid off. (d) In the event of a layoff, skilled trades journeyperson employees will be allowed one time only to displace production employees, provided that such skilled trades journeyperson employees are originally production employees and in accordance with Article 14 of this Agreement. Skilled trades journeyperson employees must return to their skilled trades jobs as soon as they are recalled. (e) In the event of the disqualification of an apprentice, he/she will be allowed, one time only, to displace a production employee, provided that such apprentice was originally a production employee and in accordance with Article 14 of this Agreement. 30.08 In the event that there is an increase in any skilled trade classification, recall shall be made in reverse order of seniority, commencing with journeyman then 30.09 In the event the Company acquires some advanced type of machinery or equipment that would call for special servicing by skilled trades employees, it is agreed that the skilled trades employees will be trained so that they may become familiar with the necessary repair and maintenance techniques required. In the case of initial installations of new equipment, processes, technology and warranty work, the Company will involve a minimum of one (1) skilled trades employee of each affected trade with the supplier's on-site personnel for training purposes. 30.10 (1) The Company and Union recognize the importance of the following principles: (i) The Company recognizes the Union's desire to perform all Skilled Trades work covered under the jurisdiction of this contract except as amended below. (ii) The Company will not use subcontracting as a method of eliminating overtime for Skilled Trade employees (iii) The parties recognize that where the Company meets its obligations as set forth in Article 31 (including overtime opportunities), there shall be no additional responsibility on the part of the Company to pay additional overtime to any other employee. However, where it is alleged that the Company has not met its obligations under Article 31, the employee concerned and/or Union shall have the right to seek redress under the grievance procedure.

  • Shift Trades 6.16.01 Employees may arrange for another employee to work their shift subject to the Manager's approval, consistent with the following: 6.16.01.01 Other than in exceptional circumstances, advice of the trade will be provided to the Manager in writing, in advance, and will be signed by the employees involved. 6.16.01.02 The employee who works a traded shift will be paid for the time worked at his/her rate of pay. 6.16.01.03 Overtime worked prior to or following a traded shift and premium credits on a holiday, in accordance with Article 7.03 and Article 13 respectively, will be credited to the employee who worked the shift as though the shift had been the employee's scheduled shift. 6.16.01.04 All recall credits will be credited to the employee who is recalled. 6.16.01.05 All time debits will be deducted from the employee who agreed to work the shift. 6.16.01.06 Company sick leave provisions will apply to the employee who agreed to work the shift and only to the amount provided for in such regulations. All time not worked in excess of one (1) full shift during a work day shall be debited in accordance with Article 6.16.01.05. 6.16.01.07 Shift trades may only be arranged between employees working in the same location except that, at locations with thirty (30) or less full-time employees, shift trades may be arranged by employees at these locations with employees at other locations within the same base and classification. Such shift trades may be granted subject to the employees concerned being qualified to perform the work function of the other party. 6.16.01.08 An employee's ability to trade shifts is not intended to allow employees to be absent from the work place for extended periods of time nor to take alternate employment. 6.16.01.09 Partial shift trades are permitted provided that no shift is split into more than two (2) parts. No more than two (2) employees may cover a single shift. Partial 6.16.01.10 It will be the sole responsibility of the employees to ensure that the introduction of partial shift trades has absolutely no adverse operational and customer service impact. 6.16.01.11 Under no circumstances shall an employee be allowed to leave his/her assigned duties or work area until their task is completed. His/her “shift trade partner” must be present and ready to take over their next assignment. This transition needs to be seamless to the customer. 6.16.01.12 There will not be additional meal or rest periods assigned to a shift subject to a partial shift trade. Meal and rest periods will be taken as scheduled. 6.16.01.13 A minimum of one (1) hour must be worked by one of the employees involved with a partial shift trade. 6.16.01.14 Any violation of the terms set out herein will result in the immediate suspension of the “partial shift trade privileges” for the employee. Such a measure will be deemed to be of an administrative nature and will not be grievable under any circumstances except as provided below. 6.16.01.15 Notwithstanding the above, the Union may file a grievance only to allege that the violation for which the partial shift trade privileges were revoked did not occur. The Union will bear the onus of the burden of proof in such circumstances. 6.16.01.16 Rules governing such other matters as deadlines for, and approval of, partial shift trade requests will be adopted locally.

  • Infrastructure Infrastructure serves as the foundation and building blocks of an integrated IT solution. It is the hardware which supports Application Services (C.3.2) and IT Management Services (C.3.3); the software and services which enable that hardware to function; and the hardware, software, and services which allow for secure communication and interoperability between all business and application service components. Infrastructure services facilitate the development and maintenance of critical IT infrastructures required to support Federal government business operations. This section includes the technical framework components that make up integrated IT solutions. One or any combination of these components may be used to deliver IT solutions intended to perform a wide array of functions which allow agencies to deliver services to their customers (or users), whether internal or external, in an efficient and effective manner. Infrastructure includes hardware, software, licensing, technical support, and warranty services from third party sources, as well as technological refreshment and enhancements for that hardware and software. This section is aligned with the FEA/DoDEA Technical Reference Model (TRM) which describes these components using a vocabulary that is common throughout the entire Federal government. A detailed review of the TRM is provided in Section J, Attachment 5. Infrastructure includes complete life cycle support for all hardware, software, and services represented above, including planning, analysis, research and development, design, development, integration and testing, implementation, operations and maintenance, information assurance, and final disposition of these components. The services also include administration and help desk functions necessary to support the IT infrastructure (e.g., desktop support, network administration). Infrastructure components of an integrated IT solution can be categorized as follows:

  • Supportive Services 2.1. Case Management Access Shelter Providers are required to have case management available to participants on site. Participation within case management is voluntary to program participants, however all participants must be offered case management and must be engaged on an ongoing basis to encourage participation. Shelter Providers should recognize that it may take multiple contacts before a participant is ready to engage. Shelter Providers must ensure case management services are participant-centered to individual needs. Programs must provide space for the provision of case management that works to create as much privacy and confidentiality as possible.

  • Hospice Services Services are available for a Member whose Attending Physician has determined the Member's illness will result in a remaining life span of six months or less.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If ECI chooses to subtend a Verizon access Tandem, ECI’s NPA/NXX must be assigned by ECI to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 ECI shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from ECI’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office ECI utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow ECI’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.

  • Durable Medical Equipment (DME), Medical Supplies, Prosthetic Devices, Enteral Formula or Food, and Hair Prosthesis (Wigs) This plan covers durable medical equipment and supplies, prosthetic devices and enteral formula or food as described in this section. DME is equipment which: • can withstand repeated use; • is primarily and customarily used to serve a medical purpose; • is not useful to a person in the absence of an illness or injury; and • is for use in the home. DME includes supplies necessary for the effective use of the equipment. This plan covers the following DME: • wheelchairs, hospital beds, and other DME items used only for medical treatment; and • replacement of purchased equipment which is needed due to a change in your medical condition or if the device is not functional, no longer under warranty, or cannot be repaired. DME may be classified as a rental item or a purchased item. In most cases, this plan only pays for a rental DME up to our allowance for a purchased DME. Repairs and supplies for rental DME are included in the rental allowance. Medical supplies are consumable supplies that are disposable and not intended for re- use. Medical supplies require an order by a physician and must be essential for the care or treatment of an illness, injury, or congenital defect. Covered medical supplies include: • essential accessories such as hoses, tubes and mouthpieces for use with medically necessary DME (these accessories are included as part of the rental allowance for rented DME); • catheters, colostomy and ileostomy supplies, irrigation trays and surgical dressings; and • respiratory therapy equipment. This plan covers diabetic equipment and supplies for the treatment of diabetes in accordance with R.I. General Law §27-20-30. Covered diabetic equipment and supplies include: • therapeutic or molded shoes and inserts for custom-molded shoes for the prevention of amputation; • blood glucose monitors including those with special features for the legally blind, external insulin infusion pumps and accessories, insulin infusion devices and injection aids; and • lancets and test strips for glucose monitors including those with special features for the legally blind, and infusion sets for external insulin pumps. The amount you pay differs based on whether the equipment and supplies are bought from a durable medical equipment provider or from a pharmacy. See the Summary of Pharmacy Benefits and the Summary of Medical Benefits for details. Coverage for some diabetic equipment and supplies may only be available from either a DME provider or from a pharmacy. Visit our website to determine if this is applicable or call our Customer Service Department. Prosthetic devices replace or substitute all or part of an internal body part, including contiguous tissue, or replace all or part of the function of a permanently inoperative or malfunctioning body part and alleviate functional loss or impairment due to an illness, injury or congenital defect. Prosthetic devices do not include dental prosthetics. This plan covers the following prosthetic devices as required under R.I. General Law § 27-20-52: • prosthetic appliances such as artificial limbs, breasts, larynxes and eyes; • replacement or adjustment of prosthetic appliances if there is a change in your medical condition or if the device is not functional, no longer under warranty and cannot be repaired; • devices, accessories, batteries and supplies necessary for prosthetic devices; • orthopedic braces except corrective shoes and orthotic devices used in connection with footwear; and • breast prosthesis following a mastectomy, in accordance with the Women’s Health and Cancer Rights Act of 1998 and R.I. General Law 27-20-29. The prosthetic device must be ordered or provided by a physician, or by a provider under the direction of a physician. When you are prescribed a prosthetic device as an inpatient and it is billed by a provider other than the hospital where you are an inpatient, the outpatient benefit limit will apply. Enteral formula or food is nutrition that is absorbed through the intestinal tract, whether delivered through a feeding tube or taken orally. Enteral nutrition is covered when it is the sole source of nutrition and prescribed by the physician for home use. In accordance with R.I. General Law §27-20-56, this plan covers enteral formula taken orally for the treatment of: • malabsorption caused by Crohn’s Disease; • ulcerative colitis; • gastroesophageal reflux; • chronic intestinal pseudo obstruction; and • inherited diseases of amino acids and organic acids. Food products modified to be low protein are covered for the treatment of inherited diseases of amino acids and organic acids. Preauthorization may be required. The amount that you pay may differ depending on whether the nutrition is delivered through a feeding tube or taken orally. When enteral formula is delivered through a feeding tube, associated supplies are also covered. This plan covers hair prosthetics (wigs) worn for hair loss suffered as a result of cancer treatment in accordance with R.I. General Law § 27-20-54 and subject to the benefit limit and copayment listed in the Summary of Medical Benefits. This plan will reimburse the lesser of the provider’s charge or the benefit limit shown in the Summary of Medical Benefits. If the provider’s charge is more than the benefit limit, you are responsible for paying any difference. This plan covers Early Intervention Services in accordance with R.I. General Law §27- 20-50. Early Intervention Services are educational, developmental, health, and social services provided to children from birth to thirty-six (36) months. The child must be certified by the Rhode Island Department of Human Services (DHS) to enroll in an approved Early Intervention Services program. Services must be provided by a licensed Early Intervention provider and rendered to a Rhode Island resident. Members not living in Rhode Island may seek services from the state in which they reside; however, those services are not covered under this plan. Early Intervention Services as defined by DHS include but are not limited to the following: • speech and language therapy; • physical and occupational therapy; • evaluation; • case management; • nutrition; • service plan development and review; • nursing services; and • assistive technology services and devices.

  • Chiropractic Services This plan covers chiropractic visits up to the benefit limit shown in the Summary of Medical Benefits. The benefit limit applies to any visit for the purposes of chiropractic treatment or diagnosis.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!