Interconnection Architecture Sample Clauses

Interconnection Architecture. Notwithstanding any other provision in the Interconnection Agreements, this Amendment, an applicable tariff or SGAT, or otherwise, this Section sets forth the Parties’ respective rights and obligations regarding interconnection architecture during the Amendment Term.
Sample 1Sample 2Sample 3See All (9)
AutoNDA by SimpleDocs
Interconnection Architecture. Where direct interconnection is utilized, the Parties will mutually designate at least one Interconnection Point (IP) within each LATA in which the Parties intend to exchange Local Traffic. Direct Interconnection may be provisioned as: 4.1.1. A Mid-Span Fiber Meet whereby the Parties mutually agree to jointly plan and engineer their facility IP at a designated manhole or junction location with each Party being individually responsible for its incurred costs in establishing this arrangement. The IP is the demarcation between ownership of the fiber transmission facility.
Sample 1
Interconnection Architecture. Notwithstanding any other provision in the Interconnection Agreements, this Amendment, an applicable tariff or SGAT, or otherwise, this Section sets forth the Parties’ respective rights and obligations regarding interconnection architecture during the Amendment Term. (a) Traffic To Which The Interconnection Architecture Applies. The network interconnection architecture arrangements set forth in this Amendment apply to interconnection facilities used by the Parties to exchange Local Traffic and ISP-Bound Traffic. They also apply to interconnection facilities used by the Parties to exchange translated LEC IntraLATA toll free service access code (e.g., 800/888/877) traffic, IntraLATA Toll traffic, tandem transit traffic, V/FX Traffic that is not ISP-Bound Traffic, and VOIP Traffic, subject, however, to the applicable terms, if any, set forth in the Interconnection Agreements or applicable tariffs (if any) relating to compensation for facilities, as modified by this Amendment. Traffic subject to the Unitary Rate under this Amendment (including VOIP Traffic subject to Section 5(b)) may be routed by either Party in the same manner as required for Local Traffic pursuant to the applicable Interconnection Agreements (as modified pursuant to this Section); provided, however, that use of such arrangements for VOIP Traffic may not be cited by or used against either Party to support either Party’s position concerning the applicability of access charges or separate trunking requirements for VOIP Traffic. To the extent (i) the pricing for interconnection facilities may differ depending on the extent to which such facilities are used for Local Traffic or for “toll,” “access” or “non-reciprocal compensation” traffic, and (ii) such interconnection facilities are used for the exchange of VOIP traffic (other than traffic subject to the AT&T VOIP Order), until such time (if any) as the FCC determines that access charges apply to such traffic, the Parties shall treat such traffic as Local Traffic, in accordance with the terms of the applicable Interconnection Agreement(s) (as modified pursuant to this Section), for purposes AMENDMENT TO INTERCONNECTION AGREEMENTS - PAGE 36 of determining billing and payment for such facilities, but in doing so the billing Party shall not be deemed to have waived any claims it may have for application of a higher transport rate should the FCC rule that access charges apply to such traffic. In the event the FCC rules that access charges apply to ...
Sample 1
Interconnection Architecture 
Sample 1Sample 2

Related to Interconnection Architecture

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at a P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Interconnection 2.1 This section applies to linking with suppliers providing public telecommunications transport networks or services in order to allow the users of one supplier to communicate with users of another supplier and to access services provided by another supplier, where specific commitments are undertaken.

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct.

  • Architecture The Private Improvements shall have architectural features, detailing, and design elements in accordance with the Project Schematic Drawings. All accessory screening walls or fences, if necessary, shall use similar primary material, color, and detailing as on the Private Improvements.

  • NETWORK INTERCONNECTION METHODS 3.1 The Interconnection provided herein may not be used solely for the purpose of originating a Party’s own interexchange traffic.

  • Access Toll Connecting Trunk Group Architecture 9.2.1 If CSTC chooses to subtend a Verizon access Tandem, CSTC’s NPA/NXX must be assigned by CSTC to subtend the same Verizon access Tandem that a Verizon NPA/NXX serving the same Rate Center Area subtends as identified in the LERG. 9.2.2 CSTC shall establish Access Toll Connecting Trunks pursuant to applicable access Tariffs by which it will provide Switched Exchange Access Services to Interexchange Carriers to enable such Interexchange Carriers to originate and terminate traffic to and from CSTC’s Customers. 9.2.3 The Access Toll Connecting Trunks shall be two-way trunks. Such trunks shall connect the End Office CSTC utilizes to provide Telephone Exchange Service and Switched Exchange Access to its Customers in a given LATA to the access Tandem(s) Verizon utilizes to provide Exchange Access in such LATA. 9.2.4 Access Toll Connecting Trunks shall be used solely for the transmission and routing of Exchange Access to allow CSTC’s Customers to connect to or be connected to the interexchange trunks of any Interexchange Carrier which is connected to a Verizon access Tandem.

  • Interconnection Customer (1) Interconnection Customer shall construct and, unless otherwise indicated, shall own, the following Interconnection Facilities: None (2) In the event that, in accordance with the Interconnection Construction Service Agreement, Interconnection Customer has exercised the Option to Build, it is hereby permitted to build in accordance with and subject to the conditions and limitations set forth in that Section, the following portions of the Transmission Owner Interconnection Facilities which constitute or are part of the Customer Facility: None Ownership of the facilities built by Interconnection Customer pursuant to the Option to Build shall be as provided in the Interconnection Construction Service Agreement.

  • Interconnection Customer Drawings Within one hundred twenty (120) days after the date of Initial Operation, unless the Interconnection Parties agree on another mutually acceptable deadline, the Interconnection Customer shall deliver to the Transmission Provider and the Interconnected Transmission Owner final, “as-built” drawings, information and documents regarding the Customer Interconnection Facilities, including, as and to the extent applicable: a one-line diagram, a site plan showing the Customer Facility and the Customer Interconnection Facilities, plan and elevation drawings showing the layout of the Customer Interconnection Facilities, a relay functional diagram, relaying AC and DC schematic wiring diagrams and relay settings for all facilities associated with the Interconnection Customer's step-up transformers, the facilities connecting the Customer Facility to the step-up transformers and the Customer Interconnection Facilities, and the impedances (determined by factory tests) for the associated step-up transformers and the Customer Facility. As applicable, the Interconnection Customer shall provide Transmission Provider and the Interconnected Transmission Owner specifications for the excitation system, automatic voltage regulator, Customer Facility control and protection settings, transformer tap settings, and communications.

  • Scope of Interconnection Service 1.3.1 The NYISO will provide Energy Resource Interconnection Service and Capacity Resource Interconnection Service to Interconnection Customer at the Point of Interconnection. 1.3.2 This Agreement does not constitute an agreement to purchase or deliver the Interconnection Customer’s power. The purchase or delivery of power and other services that the Interconnection Customer may require will be covered under separate agreements, if any, or applicable provisions of NYISO’s or Connecting Transmission Owner’s tariffs. The Interconnection Customer will be responsible for separately making all necessary arrangements (including scheduling) for delivery of electricity in accordance with the applicable provisions of the ISO OATT and Connecting Transmission Owner’s tariff. The execution of this Agreement does not constitute a request for, nor agreement to, provide Energy, any Ancillary Services or Installed Capacity under the NYISO Services Tariff or any Connecting Transmission Owner’s tariff. If Interconnection Customer wishes to supply or purchase Energy, Installed Capacity or Ancillary Services, then Interconnection Customer will make application to do so in accordance with the NYISO Services Tariff or Connecting Transmission Owner’s tariff.

  • Interconnection Customer Authority Consistent with Good Utility Practice, this LGIA, and the CAISO Tariff, the Interconnection Customer may take actions or inactions with regard to the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities during an Emergency Condition in order to (i) preserve public health and safety, (ii) preserve the reliability of the Large Generating Facility or the Interconnection Customer’s Interconnection Facilities,

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!