Introduction to P6 Course Sample Clauses

Introduction to P6 Course. 4.3.1. Preliminary course design: 4.3.1.1. Meet with TPP-PPM staff 4.3.1.1.1. Discuss specific course development plan and course expected outcomes 4.3.1.1.2. Provide meeting minutes within 2 business days to State 4.3.2. Consultant team research 4.3.2.1. Develop working knowledge of other applicable TxDOT courses, TxDOT related project and portfolio systems and applications, and PM learning paths 4.3.2.2. Research industry best project management training practices 4.3.2.3. Create and present explanation of connectivity between existing and new PM courses. The comparison analysis should be presented by course topic. 4.3.3. Conduct one course scoping workshop for each course from TxDOT office in Austin, TX with State Subject Matter Experts (SMEs) and end users who may attend via WebEx to assist with course design 4.3.3.1. Draft email workshop announcement 4.3.3.2. Provide agenda 4.3.3.3. Provide meeting minutes within 2 business days to State 4.3.3.4. Workshop purpose is to gain end user and SME perspective for course content. 4.3.4. Develop initial course learning objectives 4.3.5. Develop course learning level 4.3.6. Develop course outline with proposed course topics and recommended class duration 4.3.7. Coordinate review with State 4.3.7.1. Review course connectivity analysis, course learning objectives, learning level and course outline with proposed topics 4.3.8. Conduct review meeting, provide production overview, and next steps based on the activities above to State staff 4.3.8.1. Schedule meeting time, place, WebEx with TPP-PMM staff 4.3.8.2. Provide course connectivity analysis, course learning objectives, learning level and course outline with proposed topics 4.3.8.3. at least 3 business days to State prior to review meeting 4.3.8.4. Present course connectivity analysis, course learning objectives, learning level and course outline with proposed topics to State at review meeting 4.3.8.5. Provide meeting minutes at least 2 days after review meeting to State 4.3.9. Recommend final course design (30%) 4.3.9.1. Revise the following based on State feedback 4.3.9.1.1. Course learning objectives, outline, and class duration 4.3.9.2. Continue revising course connectivity and relationship of the new and existing courses within the PM learning paths and overall program 4.3.9.3. Coordinate review with State 4.3.9.3.1. Review course connectivity analysis, course learning objectives, learning level and course outline with proposed topics DocuSign Envelope ID:...
AutoNDA by SimpleDocs

Related to Introduction to P6 Course

  • Introduction and Background The purpose of this Schedule 2 (Contract Services and Contract Supplies) is to set out the characteristics of the Contract Services and/or Contract Supplies (as the case may be) and Funding that the Provider will be required to make available to all Contracting Authorities in relation to Lot 1 and/or Lot 2 (as the case may be) and to provide a description of what the Contract Services and/or Contract Supplies (as the case may be) and Funding will entail.

  • Introduction and Purpose Introduction • Neighbourhood Development Plans • Neighbourhood Development Orders

  • Xxxxxx and Recall 1. When the Board determines to reduce the number of positions in one or more classifications covered by this agreement because of decreased enrollment of pupils, suspension of schools, territorial changes, lack of work, return to duty of an employee from a leave of absence, or financial reasons, the Board shall follow the procedure set forth in this Section. 2. The Board shall determine in which classification the layoffs should occur and the number of employees to be laid off. 3. The Board shall lay off employees in the affected classification on the basis of reverse seniority in that classification. Seniority shall be defined as the length of continuous service as a regular employee of the Board of Education. 4. The names of laid off employees shall be kept on a recall list by classification until for two years maximum. If the Board determines to fill any position in a classification during this period of time, the Board must offer the position to the most senior employee on the recall list for that classification. The offer of recall shall be made by written notice sent to the employee at his most recent address on record by certified mail. It is the employee's responsibility to keep the Board informed of his up to date address. The employee shall have seven (7) days after the notice is mailed to accept the offer of recall and report to work. If he does not report during such seven-day period, his name shall be eliminated from the recall list and the employment relationship between him and the Board shall cease. If the first employee on the recall list for a classification does not accept the recall, the Board shall offer the position to the next most senior employee from that classification on the recall list by the procedure outlined in this Section, and so on, until the position is filled. Any employee who resigns after receiving the notice provided in Division 4 of this Section, shall be entitled, upon request, to be placed upon the recall list and shall have same recall rights as if laid off. 5. For purposes of this Section, the following classifications will be used. 1. Bus Driver 9. Bus Aide 2. Bus Mechanic 10. Head Cook 3. Building Maintenance 11. Cafeteria Worker

  • INTRODUCTION TO YOUR SUBSCRIBER AGREEMENT Thank you for choosing Blue Cross & Blue Shield of Rhode Island (BCBSRI) for your healthcare coverage. We appreciate the trust you’ve placed in us and want to help you make the most of your health plan. In this Subscriber Agreement (agreement), you’ll find valuable information about your • how your health coverage works; • how BCBSRI processes claims for the health services you receive; • your rights and responsibilities as a BCBSRI member; • BCBSRI’s rights and responsibilities; and • tools and programs to help you stay healthy and save money. We encourage you to read this agreement to learn about all the advantages of being a BCBSRI member. Below are some helpful tips on how to find what you need in this agreement. • As a member, you are responsible for understanding the benefits to which you are entitled under this agreement and the rules you must follow to receive those benefits. • The Table of Contents will help you find the order of the sections as they appear in the agreement. • The Summary of Benefits, included in this agreement, shows the amount you pay out of your own pocket. • Important contact information, such as, telephone numbers, addresses, and websites are located at the end of this document. • Some words and phrases used in this agreement are in italics. This means that the words or phrases have a special meaning as they relate to your healthcare coverage. Please see Section 8 for definitions of these words. • When we use the words “we,” “us,” and “our,” we are referring to BCBSRI. When we use the words “you” and “your” we are referring to the enrolled subscriber and/or member. These words are also defined in the Glossary. • Many sections of this document are related to other sections. You may need to reference more than one section to find the information you need.

  • RELEASE OF GENERAL INFORMATION TO THE PUBLIC AND MEDIA NASA or Partner may, consistent with Federal law and this Agreement, release general information regarding its own participation in this Agreement as desired. Pursuant to Section 841(d) of the NASA Transition Authorization Act of 2017, Public Law 115-10 (the "NTAA"), NASA is obligated to publicly disclose copies of all agreements conducted pursuant to NASA's 51 U.S.C. §20113(e) authority in a searchable format on the NASA website within 60 days after the agreement is signed by the Parties. The Parties acknowledge that a copy of this Agreement will be disclosed, without redactions, in accordance with the NTAA.

  • Execution of the Project (a) The Recipient declares its commitment to the objectives of the Project as set forth in Schedule 2 to this Agreement, and, to this end, shall carry out the Project through its MoE with due diligence and efficiency and in conformity with appropriate financial, economic, environmental and administrative practices, and shall provide, promptly as needed, the funds, facilities, services and other resources required for the Project. (b) Without limitation upon the provisions of paragraph (a) of this Section and except as the Recipient and the Association shall otherwise agree, the Recipient shall carry out the Project in accordance with the Implementation Program set forth in Schedule 4 to this Agreement. (a) Except as the Association shall otherwise agree, procurement of the goods, works and consultants’ services required for the Project and to be financed out of the proceeds of the Grant shall be governed by the provisions of Schedule 3 to this Agreement, as said provisions may be further elaborated in the Procurement Plan. (b) The Recipient shall update the Procurement Plan in accordance with terms of reference acceptable to the Association, and furnish such update to the Association not later than twelve (12) months after the date of the preceding Procurement Plan, for the Association’s approval. Section 3.03. Without limitation upon any of its obligations under paragraph (a) of Section 3.01 of this Agreement and except as the Recipient and the Association shall otherwise agree, the Recipient shall: (i) not later than by the effectiveness of this Agreement open a separate project account (the Project Account) in a commercial bank acceptable to the Association; (ii) thereafter maintain the Project Account during the entire Project implementation period, and replenish said Account regularly with funds sufficient to ensure the Recipient’s Project co-financing obligations; and (iii) use the amount in the Project Account exclusively for financing the Recipient’s contribution to Project expenditures. Section 3.04. For the purposes of Section 6.09 of the General Conditions and without limitation thereto, the Recipient shall: (a) prepare, on the basis of guidelines acceptable to the Association, and furnish to the Association not later than six (6) months after the Closing Date or such later date as may be agreed for this purpose between the Recipient and the Association, a plan designed to ensure the continued achievement of the Project’s objectives; and (b) afford the Association a reasonable opportunity to exchange views with the Recipient on said plan.

  • Vendor’s Resellers as Related to This Agreement Vendor’s Named Resellers (“Resellers”) under this Agreement shall comply with all terms and conditions of this agreement and all addenda or incorporated documents. All actions related to sales by Authorized Vendor’s Resellers under this Agreement are the responsibility of the awarded Vendor. If Resellers fail to report sales to TIPS under your Agreement, the awarded Vendor is responsible for their contractual failures and shall be billed for the fees. The awarded Vendor may then recover the fees from their named reseller. If there is a dispute between the awarded Vendor and TIPS Member, TIPS or its representatives may, at TIPS sole discretion, assist in conflict resolution if requested by either party. TIPS, or its representatives, reserves the right to inspect any project and audit the awarded Vendor’s TIPS project files, documentation and correspondence related to the requesting TIPS Member’s order. If there are confidentiality requirements by either party, TIPS shall comply to the extent permitted by law. The TIPS Solicitation which resulted in this Vendor Agreement, whether a Request for Proposals, the Request for Competitive Sealed Proposals or Request for Qualifications solicitation, or other, the Vendor’s response to same and all associated documents and forms made part of the solicitation process, including any addenda, are hereby incorporated by reference into this Agreement as if copied verbatim. THE SECTON HEADERS OR TITLES WITHIN THIS DOCUMENT ARE MERELY GUIDES FOR CONVENIENCE AND ARE NOT FOR CLASSIFICATION OR LIMITING OF THE RESPONSIBILITES OF THE PARTIES TO THIS DOCUMENT. Texas governmental entities are prohibited from doing business with companies that fail to certify to this condition as required by Texas Government Code Sec. 2270. By executing this agreement, you certify that you are authorized to bind the undersigned Vendor and that your company (1) does not boycott Israel; and (2) will not boycott Israel during the term of the Agreement. You certify that your company is not listed on and does not and will not do business with companies that are on the Texas Comptroller of Public Accounts list of Designated Foreign Terrorists Organizations per Texas Gov't Code 2270.0153 found at xxxxx://xxxxxxxxxxx.xxxxx.xxx/purchasing/docs/foreign-terrorist.pdf You certify that if the certified statements above become untrue at any time during the life of this Agreement that the Vendor will notify TIPS within three (3) business day of the change by a letter on Vendor’s letterhead from and signed by an authorized representative of the Vendor stating the non-compliance decision and the TIPS Agreement number and description at: Attention: General Counsel ESC Region 8/The Interlocal Purchasing System (TIPS) 0000 Xxxxxxx 000 Xxxxx Xxxxxxxxx, XX,00000 And by an email sent to xxxx@xxxx-xxx.xxx The undersigned Vendor agrees to maintain the below minimum insurance requirements for TIPS Contract Holders: When the Vendor or its subcontractors are liable for any damages or claims, the Vendor’s policy, when the Vendor is responsible for the claim, must be primary over any other valid and collectible insurance carried by the Member. Any immunity available to TIPS or TIPS Members shall not be used as a defense by the contractor's insurance policy. The coverages and limits are to be considered minimum requirements and in no way limit the liability of the Vendor(s). Insurance shall be written by a carrier with an A-; VII or better rating in accordance with current A.M. Best Key Rating Guide. Only deductibles applicable to property damage are acceptable, unless proof of retention funds to cover said deductibles is provided. "Claims made" policies will not be accepted. Vendor’s required minimum coverage shall not be suspended, voided, cancelled, non-renewed or reduced in coverage or in limits unless replaced by a policy that provides the minimum required coverage except after thirty (30) days prior written notice by certified mail, return receipt requested has been given to TIPS or the TIPS Member if a project or pending delivery of an order is ongoing. Upon request, certified copies of all insurance policies shall be furnished to the TIPS or the TIPS Member. • Orders: All Vendor orders received from TIPS Members must be emailed to TIPS at tipspo@tips- xxx.xxx. Should a TIPS Member send an order directly to the Vendor, it is the Vendor’s responsibility to forward a copy of the order to TIPS at the email above within 3 business days and confirm its receipt with TIPS. • Vendor Encouraging Members to bypass TIPS agreement: Encouraging TIPS Members to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program. • Order Confirmation: All TIPS Member Agreement orders are approved daily by TIPS and sent to the Vendor. The Vendor should confirm receipt of orders to the TIPS Member (customer) within 3 business days. • Vendor custom website for TIPS: If Vendor is hosting a custom TIPS website, updated pricing when effective. TIPS shall be notified when prices change in accordance with the award.

  • No Consideration Absent Execution of this Agreement Employee understands and agrees that Employee would not receive the monies and/or benefits specified in paragraph “2” above, except for Employee’s execution of this Agreement and the fulfillment of the promises contained herein.

  • Customer Relationships The Executive understands and acknowledges that the Company has expended significant resources over many years to identify, develop, and maintain its clients. The Executive additionally acknowledges that the Company’s clients have had continuous and long-standing relationships with the Company and that, as a result of these close, long-term relationships, the Company possesses significant knowledge of and confidential information about its clients and their needs. Finally, the Executive acknowledges the Executive’s association and contact with these clients is derived solely from Executive’s employment with the Company. The Executive further acknowledges that the Company does business throughout the United States and that the Executive personally has significant contact with the Company’s clients and customers solely as a result of Executive’s relationship with the Company.

  • Operation of the Business Except as set forth on Section 10.1 of the Sentech Disclosure Schedule, as contemplated by this Agreement or as expressly agreed to in writing by Sensec and Ensec, during the period from the date of this Agreement to the Effective Time, Sentech and its Subsidiaries will conduct their operations only in the ordinary course of business consistent with sound financial, operational and regulatory practice, and will take no action which would materially adversely affect their ability to consummate the Transactions. Without limiting the generality of the foregoing, except as otherwise expressly provided in this Agreement or except as disclosed in the Sentech Disclosure Schedule, prior to the Effective Time, neither Sentech nor any of its Subsidiaries will, without the prior written consent of Sensec and Ensec: (a) amend its Charter Documents or bylaws (or similar organizational documents); (b) authorize for issuance, issue, sell, deliver, grant any options for, or otherwise agree or commit to issue, sell or deliver any shares of its capital stock or any other securities, other than pursuant to and in accordance with the terms of any Existing Options or Sentech Warrants listed on the Sentech Disclosure Schedule; (c) recapitalize, split, combine or reclassify any shares of its capital stock; declare, set aside or pay any dividend or other distribution (whether in cash, stock or property or any combination thereof) in respect of its capital stock; or purchase, redeem or otherwise acquire any of its or its Subsidiaries' securities or modify any of the terms of any such securities; (d) (i) create, incur, assume or permit to exist any long-term debt or any short-term debt for borrowed money other than under existing notes payable, lines of credit or other credit facilities or in the ordinary course of business, or with respect to its Wholly-Owned Subsidiaries in the ordinary course of business; (ii) assume, guarantee, endorse or otherwise become liable or responsible (whether directly, contingently or otherwise) for the obligations of any other Person except its Wholly-Owned Subsidiaries in the ordinary course of business or as otherwise may be contractually required and disclosed in the Sentech Disclosure Schedule; or (iii) make any loans, advances or capital contributions to, or investments in, any other Person except its Wholly-Owned Subsidiaries; (i) amend any Sentech Benefit Plan or (ii) except in the ordinary course of business consistent with usual practice or established policy (a) increase in any manner the rate of compensation of any of its directors, officers or other employees everywhere, except for increases in the ordinary course of business; (b) pay or agree to pay any bonus, pension, retirement allowance, severance or other employee benefit except as required under currently existing Sentech Benefit Plans disclosed in the Sentech Disclosure Schedule or in the ordinary course of business; or (c) amend, terminate or enter into any employment, consulting, severance, change in control or similar agreements or arrangements with any of its directors, officers or other employees; (f) enter into any material agreement, commitment or contract, except agreements, commitments or contracts for the purchase, sale or lease of goods or services in the ordinary course of business; (g) other than in the ordinary course of business, authorize, recommend, propose or announce an intention to authorize, recommend or propose, or enter into any Contract with respect to, any (i) plan of liquidation or dissolution, (ii) acquisition of a material amount of assets or securities, (iii) disposition or Encumbrance of a material amount of assets or securities, (iv) merger or consolidation or (v) material change in its capitalization; (h) change any material accounting or Tax procedure or practice; (i) take any action the taking of which, or knowingly omit to take any action the omission of which, would cause any of the representations and warranties herein to fail to be true and correct in all material respects as of the date of such action or omission as though made at and as of the date of such action or omission; (j) compromise, settle or otherwise modify any material claim or litigation not identified in the Sentech Disclosure Schedule; or (k) commit or agree to do any of the foregoing.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!