LAWS AND REGULATIONS TO BE COMPLIED WITH Sample Clauses

LAWS AND REGULATIONS TO BE COMPLIED WITH. 25.1 The Contractor shall in respect of all matters arising from the fulfilment of this Agreement, comply and ensure that the Contractor Employees comply with all laws, regulations, by-laws and/or requirements of local or other authorities which are applicable to this Agreement. 25.2 In this regard special reference is inter alia made to the following acts that do not constitute an exhaustive list: - Occupational Health and Safety Act No 85 of 1993. (Also refer to Annexure A); - Hazardous Substances Act; and - Dangerous Goods Act. 25.3 The Contractor further undertakes to ensure that its agreements with its Contractor Employee shall mutatis mutandis contain the same stipulations as provided for above and shall upon request submit written proof to ArcelorMittal that it has complied with this stipulation. 25.4 In the event of the Contractor failing to comply with the abovementioned, such failure shall amount to a breach of the terms and conditions of this Agreement and shall entitle ArcelorMittal to act in accordance with clause 23 above.
Sample 1Sample 2Sample 3See All (10)
AutoNDA by SimpleDocs
LAWS AND REGULATIONS TO BE COMPLIED WITH. 28.1 The Law, which is to apply to this Agreement and according to which this Agreement is to be construed, shall be the Law of the Republic of South Africa unless otherwise stated. The Contractor shall in respect of all matters arising from the fulfilment of this Agreement, comply and ensure that the Contractor Employees comply with all laws, regulations, by- laws and/or requirements of local or other authorities which are applicable to this Agreement. 28.2 In this regard special reference is inter alia made to the following Acts that do not constitute an exhaustive list: - Road Traffic Act, Act 93 of 1996; - Occupational Health and Safety Act No 85 of 1993. (Also refer to Annexure A); - Hazardous Substances Act; and - Dangerous Goods Act. 28.3 The Contractor further undertakes to ensure that its agreements with its Employees and sub-contractors shall mutatis mutandis contain the same stipulations as provided for above and shall submit written proof to ArcelorMittal that it has complied with this stipulation. 28.4 In the event of the Contractor failing to comply with the abovementioned, such failure shall amount to a breach of the terms and conditions of this Agreement and shall entitle ArcelorMittal to act in accordance with clause 25 and 26 above.
Sample 1Sample 2See All (5)
LAWS AND REGULATIONS TO BE COMPLIED WITH. 26.1 The Contractor shall in respect of all matters arising from the fulfilment of this Agreement, comply and ensure that the Contractor Employees comply with all laws, regulations, by-laws and/or requirements of local or other authorities which are applicable to this Agreement. 26.2 In this regard special reference is inter alia made to the following acts that do not constitute an exhaustive list: - Occupational Health and Safety Act No 85 of 1993. (Also refer to Annexure A); - Hazardous Substances Act; and - Dangerous Goods Act. 26.3 National Railway Safety Regulator Act, Act No. 16 of 2002 26.3.1 In accordance with the provisions of Chapter 4 of this Act, the Contractor will have to apply and be in possession of a safety permit. The Contractor shall supply ArcelorMittal with a copy of this permit prior to the Effective Date. 26.3.2 The Act requires amongst others, that all railway operators design and implement Safety Management Systems and Standards (Chapter 5) in accordance with the relevant sections of the Act. The Contractor warrants that it has such Safety Management Systems and Standards in place and shall supply a copy thereof to ArcelorMittal on demand. 26.4 Trade Metrology Act, Act 77 of 1973 26.5 The Contractor shall be responsible for the operation, maintenance and certification of the dual platform rail weighbridge in terms of the Trade Metrology Act, Act 77 of 1973. Notwithstanding the provisions of this Act, an annual certification of calibration shall be done during the month of July of each year by an SABS accredited weighbridge calibrator and the cost of such calibration shall be for the account of the Contractor. In addition, the Contractor shall shunt a test wagon (test mass) provided by ArcelorMittal, at least once a week on the weighbridge and keep records of recorded masses. These records must be available to the AMSA on request and all certificates and records must be handed to ArcelorMittal when this Agreement terminates. 26.6 The Contractor further undertakes to ensure that its agreements with its Employee/s shall mutatis mutandis contain the same stipulations as provided for above and shall upon request submit written proof to ArcelorMittal that it has complied with this stipulation. 26.7 In the event of the Contractor failing to comply with the abovementioned, such failure shall amount to a breach of the terms and conditions of this Agreement and shall entitle ArcelorMittal to act in accordance with clause 23 and/or 24 above.
Sample 1
LAWS AND REGULATIONS TO BE COMPLIED WITH. The Contractor, at its own expense, complies with: • the Nuclear Energy Act 92 of 1982, • the National Key Points Act 102 of 1980, • the Protection of Information Act 84 of 1982, • the Occupational Health and Safety Act 85 of 1993 and its regulations, • the Basic Conditions of Employment Act 75 of 1997. The Contractor indemnifies the Employer against any claims, proceedings, compensation and cost arising from the Contractor’s transgression of the Act, • the Labour Relations Act 66 of 1995, • the Medicine and Related Substance Control Act 101 of 1965, • the National Health Act 61 of 2003, • the Compensation for Occupational Injuries and Diseases Act 130 of 1993, and • all laws, regulations, bye-laws and requirements of local and other authorities which may be applicable to the works and as amended or replaced. While on the Site, the Contractor is at all times be under the authority of the Employer’s Power Station Manager for the purpose of giving effect to the provisions of the above. However, this does not in any way relieve the Contractor of his obligation to comply with the relevant legislation. Failure of the Employer’s Power Station Manager to act in any specific manner does not make him or the Employer liable to the Contractor in any manner for any matter which may arise as a consequence of such failure to act.
Sample 1

Related to LAWS AND REGULATIONS TO BE COMPLIED WITH

  • Applicable Laws and Regulations All duly promulgated applicable federal, state and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits and other duly authorized actions of any Governmental Authority having jurisdiction over the relevant parties, their respective facilities, and/or the respective services they provide.

  • Laws and Regulations All Equipment, Products, or Services provided under this Contract must comply fully with applicable federal laws and regulations, and with the laws in the states and provinces in which the Equipment, Products, or Services are sold.

  • Sanctions Laws and Regulations The Borrower shall not, directly or indirectly, use the proceeds of the Loans or any Letter of Credit or lend, contribute or otherwise make available such proceeds to any Guarantor, Subsidiary, Unconsolidated Affiliate or other Person (i) to fund any activities or business of or with any Designated Person, or in any country or territory, that at the time of such funding is itself the subject of territorial sanctions under applicable Sanctions Laws and Regulations, (ii) in any manner that would result in a violation of applicable Sanctions Laws and Regulations by any party to this Agreement, or (iii) in any manner that would cause the Borrower, the Guarantors or any of their respective Subsidiaries to violate the United States Foreign Corrupt Practices Act. None of the funds or assets of the Borrower or Guarantors that are used to pay any amount due pursuant to this Agreement shall constitute funds obtained from transactions with or relating to Designated Persons or countries which are themselves the subject of territorial sanctions under applicable Sanctions Laws and Regulations. Borrower shall maintain policies and procedures designed to achieve compliance with Sanctions Laws and Regulations.

  • Compliance with Applicable Laws and Regulations (a) To the best of Borrower’s knowledge after due inquiry and investigation, each of the following is true: (i) All Improvements and the use of the Mortgaged Property comply with all applicable statutes, rules and regulations, including all applicable statutes, rules and regulations pertaining to requirements for equal opportunity, anti-discrimination, fair housing, environmental protection, zoning and land use (“legal, non-conforming” status with respect to uses or structures will be considered to comply with zoning and land use requirements for the purposes of this representation). (ii) The Improvements comply with applicable health, fire, and building codes. (iii) There is no evidence of any illegal activities relating to controlled substances on the Mortgaged Property. (b) Reserved.

  • Laws, Rules and Regulations You agree to comply with all existing and future operating procedures used by the Bank for processing of transactions. You further agree to comply with, and be bound by, all applicable state or federal laws, rules, regulations, orders, guidelines, operating circulars and pronouncements, affecting checks and drafts, including, but not limited to, all rules and procedural guidelines established by the Board of Governors of the Federal Reserve and the Electronic Check Clearing House Organization ("ECCHO") and any other clearinghouse or other organization in which Bank is a member or to which rules Bank has agreed to be bound. These procedures, rules, and regulations (collectively the "Rules") and laws are incorporated herein by reference. In the event of conflict between the terms of this Agreement and the Rules, the Rules will control.

  • Compliance with Applicable Laws, Rules and Regulations The Dealer Manager represents to the Company that (a) it is a member of FINRA in good standing, and (b) it and its employees and representatives who will perform services hereunder have all required licenses and registrations to act under this Agreement. With respect to its participation and the participation by each Participating Dealer in the offer and sale of the Offered Shares (including, without limitation, any resales and transfers of Offered Shares), the Dealer Manager agrees, and, by virtue of entering into the Participating Dealer Agreement, each Participating Dealer shall have agreed, to comply with any applicable requirements of the Securities Act and the Exchange Act, applicable state securities or blue sky laws, and, specifically including, but not in any way limited to, NASD Conduct Rules 2340 and 2420, and FINRA Conduct Rules 2310, 5130 and 5141.

  • Notification of Laws and Regulations The Servicer shall immediately notify the Issuer, the Indenture Trustee and the Rating Agencies in writing if it becomes aware of any Requirements of Law or CPUC Regulations hereafter promulgated that have a material adverse effect on the Servicer’s ability to perform its duties under this Agreement.

  • Compliance with all Applicable Laws and Regulations Grantee must comply with all applicable federal, state and local laws, rules, regulations, and ordinances in administering CRF under this Agreement. Grantee acknowledges that this requirement includes, but is not limited to, compliance with all applicable federal, state, and local health and safety rules and regulations. Grantee’s failure to comply with any part of this provision is material and must be grounds for termination of this Agreement for cause by Florida Housing.

  • Securities Laws Requirements The Company shall not be obligated to transfer any Common Stock to the Participant free of the restrictive legend described in Section 4 hereof or of any other restrictive legend, if such transfer, in the opinion of counsel for the Company, would violate the Securities Act of 1933, as amended (the "Securities Act") (or any other federal or state statutes having similar requirements as may be in effect at that time).

  • CODES AND REGULATIONS The Contractor shall strictly comply with all Federal, State and local codes and regulations.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!