MAINTENANCE AND TESTING OF SYSTEMS Sample Clauses

MAINTENANCE AND TESTING OF SYSTEMS. A. The Lessor is responsible for the total maintenance and repair of the leased Premises, including the site and private access roads. All equipment and systems shall be maintained to provide reliable, energy efficient service without unusual interruption, disturbing noises, exposure to fire or safety hazards, uncomfortable drafts, excessive air velocities, or unusual emissions of dirt. The Lessor's maintenance responsibility includes initial supply and replacement of all supplies, materials, and equipment necessary for such maintenance. Maintenance, testing, and inspection of appropriate equipment and systems shall be done in accordance with current applicable codes, and inspection certificates shall be displayed as appropriate. Copies of all records in this regard shall be forwarded to the Government’s designated representative. B. At the Lessor’s expense, the Government reserves the right to require documentation of proper operations, inspection, testing, and maintenance of fire protection systems, such as, but not limited to, fire alarm, fire sprinkler, standpipes, fire pump, emergency lighting, illuminated exit signs, and emergency generator, prior to occupancy to ensure proper operation. These tests shall be witnessed by the Government’s designated representative.
Sample 1Sample 2Sample 3See All (20)
AutoNDA by SimpleDocs
MAINTENANCE AND TESTING OF SYSTEMS. A. The Lessor is responsible for the maintenance and repair of the leased premises, excluding TSA’s negligence. Such maintenance and repairs include the site and private access roads. All equipment and systems shall be maintained to provide reliable, energy efficientservice without unusual interruption, disturbing noises, exposure to fire or safety hazards, uncomfortable drafts, excessive air velocities, or unusual emissions of dirt. The Lessor's maintenance responsibility includes initial supply and replacement of all supplies, materials, and equipment necessary for such maintenance. Maintenance, testing, and inspection of appropriate equipment and systems shall be done in accordance with current applicable codes, and inspection certificates shall be displayed as appropriate. Copies of all records in this regard shall be forwarded to the GSA Field Office Manager or a designated representative. TSA has accepted and is in possession of the leased premises. B. Without any additional charge, the Government reserves the right to require documentation of proper operations or testing prior to occupancy of such systems as fire alarm, sprinkler, standpipes, fire pumps, emergency lighting, illuminated exit signs, emergency generator, etc. to ensure proper operation. These tests shall be witnessed by a designated representative of the Contracting Officer.
Sample 1
MAINTENANCE AND TESTING OF SYSTEMS. (SEP 2013) A. The Lessor is responsible for the total maintenance and repair of the Property and leased Premises at the Lessor’s sole expense. Such maintenance and repairs include the site and private access roads. All equipment and systems shall be maintained to provide reliable, energy efficient service without unusual interruption, disturbing noises, exposure to fire or safety hazards, uncomfortable drafts, excessive air velocities, or unusual emissions of dirt. The Lessor's maintenance responsibility includes initial supply and replacement of all supplies, materials, and equipment necessary for such maintenance. Maintenance, testing, and inspection of appropriate equipment and systems shall be done in accordance with current applicable codes, and inspection certificates shall be displayed as appropriate. Copies of all records in this regard shall be forwarded to the Government’s designated representative. B. At the Lessor’s sole expense, the Government reserves the right to require documentation of proper operations, inspection, testing, and maintenance of fire protection systems, such as, but not limited to, fire alarm, fire sprinkler, standpipes, fire pump, emergency lighting, illuminated exit signs, emergency generator, to ensure proper operation. These tests shall be witnessed by the Government’s designated representative.
Sample 1
MAINTENANCE AND TESTING OF SYSTEMS. (JUN 2012) A. The Lessor is responsible for the total maintenance and repair of the leased premises. B. Maintenance and repairs include the site and private access roads. All lessor provided equipment and systems shall be maintained to provide reliable, energy efficient service without unusual interruption, disturbing noises, exposure to fire or safety hazards, uncomfortable drafts, excessive air velocities, or unusual emissions of dirt. The lessor's maintenance responsibility includes initial supply and replacement of all supplies, materials, and equipment necessary for such maintenance. Maintenance, testing, and inspection of appropriate equipment and systems shall be done in accordance with current applicable codes, and inspection certificates shall be displayed as appropriate. Copies of all records in this regard shall be forwarded to the Government’s designated representative. C. At the Lessor’s expense, the Government reserves the right to require documentation of proper operations or testing inspection, testing, and maintenance of fire protection systems, such as fire alarm, fire sprinkler, standpipes, fire pump, emergency lighting, illuminated exit signs, emergency generator. prior to occupancy to ensure proper operation. These tests shall be witnessed by the Government’s designated representative. D. Fixing broken items: If found not to be wear and tear; within four (4) working days the Lessor shall provide a quote to the
Sample 1
MAINTENANCE AND TESTING OF SYSTEMS. (SEP 2013)
Sample 1
MAINTENANCE AND TESTING OF SYSTEMS. (SEP 2013) A. The Lessor is responsible for the total maintenance and repair of the leased Premises. Such maintenance and repairs include the site and private access roads. All equipment and systems shall be maintained to provide reliable, energy efficient service without unusual interruption, disturbing noises, exposure to fire or safety hazards, uncomfortable drafts, excessive air velocities, or unusual emissions of dirt. The Lessor's maintenance responsibility includes initial supply and replacement of all supplies, materials, and equipment necessary for such maintenance. Maintenance, testing, and inspection of appropriate equipment and systems shall be done in accordance with current applicable codes, and inspection certificates shall be displayed as appropriate. Copies of all records in this regard shall be forwarded to the Government’s designated representative.
Sample 1

Related to MAINTENANCE AND TESTING OF SYSTEMS

  • Maintenance and Support Services 3.1 Subject to Client’s timely payment of applicable Maintenance and Support fees, MRI will provide to Client the Maintenance and Support services for the Maintenance and Support plan indicated in the Order Document during the specified period. All licenses in Client’s possession must be supported under the same Maintenance and Support plan. 3.2 Updates are provided if and when available and MRI shall notify Client of the availability of such Updates solely by posting such Updates at MRI’s client support portal. MRI is under no obligation to develop any future programs or functionality. MRI is under no obligation to provide Maintenance and Support with respect to: (i) Software that has been altered or modified by anyone other than MRI or its licensors; (ii) a release for which Maintenance and Support has been discontinued; (iii) Software used other than in accordance with the Documentation or other than on a XXX; (iv) discrepancies that do not significantly impair or affect the operation of the Software; (v) any systems or programs not supplied by MRI; or (vi) Configurations. 3.3 Subject to timely payment of the applicable fees, Maintenance and Support is provided for all Software, unless otherwise noted in the Order Document, provided however that with respect to Third Party Software, MRI’s obligation is limited to using commercially reasonable endeavours to obtain Maintenance and Support from the third party owner of such Software. 3.4 Maintenance and Support starts on the Effective Date and continues through the expiration of the initial term set forth in the Order Document (“Initial Term”). Following the end of the Initial Term, Maintenance and Support and the license grant under Section 2.1 shall automatically renew for the same length as the Initial Term (each renewal a “Renewal Term”), unless either Party gives written notice at least sixty (60) calendar days prior to the end of the Initial Term or any Renewal Term, as applicable, of its intention to not renew Maintenance and Support and the license grant. The pricing for the first twelve (12) months of any Renewal Term shall be provided in writing by MRI no less than ninety (90) days prior to the end of the Initial Term or any Renewal Term. Notice to not renew the Initial Term or any Renewal Term shall be given in accordance with section 10.8 of the Master Agreement and shall be deemed given upon delivery to the non-cancelling Party. For purposes of the pricing notice in this Section only, email or first-class mail will suffice. The Initial Term and Renewal Terms are collectively referred to as the “Term”. 3.5 In the event that Client’s Maintenance and Support is not renewed and is later reinstated, a reinstatement fee shall be assessed equal to 120% of the aggregate Maintenance and Support fee that would have been payable during the period of lapse. In order to reinstate Maintenance and Support, Client must Upgrade its Software to the most current release and pay for any applicable Upgrade fees. 3.6 If ordered by Client, Maintenance and Support must be ordered for all Software and all associated License Metrics licensed by Client and its Affiliates. Client may not purchase or renew Maintenance and Support for less than all of the Software licensed by Client. 3.7 Fees for Maintenance and Support do not include implementation, training and other Professional Services, such as project management, conversion, report writing, and external systems interface development. 3.8 It is Client’s responsibility to ensure that all appropriate users receive initial training services sufficient to enable Client to effectively use the Software. Failure to do so could result in additional Maintenance and Support fees if service requests are deemed excessive as a result of insufficient training, at MRI’s discretion. 3.9 The System will need to be installed on Client’s servers and technology infrastructure. If utilizing Professional Services or Maintenance and Support in the installation of the System, Client shall ensure that MRI’s assigned technical personnel are able to access the System remotely. Client shall be responsible for providing access through any security measures it deems necessary. MRI alone shall decide whether access to the System is sufficient for Maintenance and Support purposes. Certain functionality of the System may require connections to or interaction with MRI after such System is running on Client’s infrastructure, and Client agrees to permit and facilitate such connections

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Maintenance and Support NCR Voyix is solely responsible for providing any maintenance and support services with respect to the Software as specified in the Agreement, or as required under applicable law. The parties acknowledge that Apple has no obligation whatsoever to furnish any maintenance and support services with respect to the Software.

  • Inspection and Testing Each Constructing Entity shall cause inspection and testing of the Interconnection Facilities that it constructs in accordance with the provisions of this section. The Construction Parties acknowledge and agree that inspection and testing of facilities may be undertaken as facilities are completed and need not await completion of all of the facilities that a Constructing Entity is building.

  • Maintenance of Services A. Reseller will adopt and adhere to the standards contained in the applicable BellSouth Work Center Interface Agreement regarding maintenance and installation of service. B. Services resold under the Company’s Tariffs and facilities and equipment provided by the Company shall be maintained by the Company. C. Reseller or its end users may not rearrange, move, disconnect, remove or attempt to repair any facilities owned by the Company, other than by connection or disconnection to any interface means used, except with the written consent of the Company. D. Reseller accepts responsibility to notify the Company of situations that arise that may result in a service problem. E. Reseller will be the Company's single point of contact for all repair calls on behalf of Reseller’s end users. The parties agree to provide one another with toll-free contact numbers for such purposes. F. Reseller will contact the appropriate repair centers in accordance with procedures established by the Company. G. For all repair requests, Reseller accepts responsibility for adhering to the Company's prescreening guidelines prior to referring the trouble to the Company. H. The Company will xxxx Reseller for handling troubles that are found not to be in the Company's network pursuant to its standard time and material charges. The standard time and material charges will be no more than what BellSouth charges to its retail customers for the same services. I. The Company reserves the right to contact Reseller’s customers, if deemed necessary, for maintenance purposes.

  • System Maintenance The Trust understands that USBFS will perform periodic maintenance to the System(s), which may cause temporary service interruptions. To the extent possible, USBFS shall notify the Trust of all planned outages and will perform any necessary maintenance during non-business hours.

  • Maintenance and Operation Member-Generator agrees to maintain their system and facilities in accordance with applicable manufacturer's recommended maintenance schedule and standard prudent engineering practices. Member-Generator covenants and agrees to operate their system, facilities and equipment so as to minimize the likelihood for a malfunction or other disturbance, damaging or otherwise affecting or impairing Cooperative’s electrical system. Member-Generator shall comply with all applicable laws, regulations, zoning, building codes, safety rules and other environmental regulations or restrictions applicable to the design, installation, operation and maintenance of the Member-Generator's System.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!