Operation and Maintenance Responsibility Sample Clauses

Operation and Maintenance Responsibility. This Agreement shall serve as the signed statement and agreement by the Property Owner accepting responsibility for the permanent operation and maintenance of stormwater treatment measures as set forth in this Agreement, and the documents incorporated by reference into the Agreement, and as required by the NPDES Permit until the responsibility is legally transferred to another person or entity. Before the Property is legally transferred to another person or entity, the Property Owner shall provide to the County at least one of the following: 1. A signed statement from a public entity assuming permanent post-construction responsibility for treatment measure maintenance and that the treatment measures meet all local agency design standards; or 2. Written conditions in the sales or lease agreement requiring the buyer or lessee to assume permanent responsibility for operation and maintenance (“O&M”) consistent with this provision, which conditions, in the case of purchase and sale agreements, shall be written to survive beyond the close of escrow and which shall run with the land; or 3. Written text in project conditions, covenants and restrictions (“CCRs”) for residential properties permanently assigning O&M responsibilities to the homeowners association for O&M of the treatment measures, such responsibilities to run with the land; or 4. Any other legally enforceable agreement or mechanism acceptable to County that assigns responsibility for the maintenance of treatment measures.
Sample 1Sample 2Sample 3See All (10)
AutoNDA by SimpleDocs
Operation and Maintenance Responsibility. (a) This Agreement shall serve as the signed statement by the Property Owner accepting responsibility for operation and maintenance of the Property’s SMP(s) as set forth in this Agreement until the responsibility is legally transferred to another entity, as provided in 2(b) below. (b) This Agreement shall serve as notice to all successors and assigns of the title to the Property of the obligations herein set forth. At such time as the Property is transferred, the new owner of the Property shall have the rights and responsibilities of the Property Owner under this Agreement. (c) Property Owner, at Property Owner’s sole expense, shall perform, or shall cause to be performed, the work reasonably necessary to keep the SMP(s) in good working order and condition so that the SMP(s) are performing their intended design functions within expected tolerances. This includes, but is not limited to, all pipes and channels built to convey stormwater to the SMP(s), as well as all structures, improvements, and vegetation provided to control the quantity and quality of the stormwater.
Sample 1Sample 2Sample 3See All (8)
Operation and Maintenance Responsibility. This agreement and covenants contained herein shall apply to and bind the Property Owner(s) and Property Owner(s)’ heirs, executives, successors, and assigns, and shall bind all present and subsequent owners of the property.
Sample 1
Operation and Maintenance Responsibility. (a) This Agreement shall serve as the signed statement by the Property Owner accepting responsibility for operation and maintenance of the Property and the GI Project as set forth in this Agreement until the responsibility is legally transferred to another entity, as provided in 2(b) below. (b) This Agreement shall serve as notice to all successors and assigns of the title to the Property of the obligations herein set forth. At such time as the Property is transferred, the new owner of the Property shall have the rights and responsibilities of Property Owner under this Agreement. (c) The Property Owner, at the Property Owner’s sole expense, shall cause to be performed, the work reasonably necessary to keep the GI Project and GI Area in good working order and condition, in perpetuity, so that the GI Project is performing its intended design functions within expected tolerances. This includes, but is not limited to, all pipes and channels built to convey stormwater to the GI Project, as well as all structures, improvements, and vegetation provided to control the quantity and quality of the stormwater.
Sample 1

Related to Operation and Maintenance Responsibility

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire 17.1.1 During the Operation Period, the Concessionaire shall operate and maintain the Bus Terminal in accordance with this Agreement either by itself, or through the O&M Contractor and if required, modify, repair or otherwise make improvements to the Bus Terminal to comply with the provisions of this Agreement, Applicable Laws and Applicable Permits, and conform to Specifications and Standards and Good Industry Practice. The obligations of the Concessionaire hereunder shall include: (a) permitting safe, smooth and uninterrupted flow of traffic on the Bus Terminal during normal operating conditions. Buses of other state road transport corporations shall be parked inside the Bus Terminal for which no charges shall be payable to the Concessionaire and if any charges are applicable for such parking then it shall be realized by Authority only; (b) minimising incidents affecting the safety and use of the Bus Terminal by providing a rapid and effective response and maintaining liaison with emergency services of the State; (c) carrying out periodic preventive maintenance of the Bus Terminal; (d) undertaking routine maintenance including prompt repairs of ticket counters, Workshops, Authority's Office and other infrastructure as mentioned in the Operation and Maintenance Schedule; (e) undertaking major maintenance such as per the Maintenance Schedule of the major infrastructure in the Bus Terminal; (f) preventing, with the assistance of the concerned law enforcement agencies, any encroachments on the Bus Terminal; (g) protection of the environment and provision of equipment and materials therefor; (h) operation and maintenance of all communication, control and administrative systems necessary for the efficient operation of the Bus Terminal; (i) maintaining a public relations unit to interface with and attend to suggestions from the Users, passengers, government agencies, media and other agencies; (j) complying with Safety Requirements in accordance with Article 18; (k) operation and maintenance of all Project Assets diligently and efficiently and in accordance with Good Industry Practice; (l) maintaining punctuality and reliability in operating the Bus Terminal; and (m) maintaining a high standard of cleanliness and hygiene in the Bus Terminal. 17.1.2 The Concessionaire shall remove promptly from the Bus Terminal all surplus construction machinery and materials, waste materials (including hazardous materials and waste water), rubbish and other debris (including, without limitation, accident debris) and keep the Bus Terminal in a clean, tidy and orderly condition,

  • Operation and Maintenance Manuals Receipts for transmittal of Operation and Maintenance Manuals, Brochures and Data to the Design Professional (or Commissioning Agent) as required by Section 6.1.1.5.

  • Operations and Maintenance Seller shall not during the months of June through September inclusive schedule any non-emergency maintenance that reduces the energy generating capability of the Facility by more than ten percent (10%), unless (i) such outage is required to avoid damage to the Facility, (ii) such maintenance is necessary to maintain equipment warranties and cannot be scheduled outside the months of June through September, (iii) such outage is required in accordance with prudent electrical practices, or (iv) the Parties agree otherwise in writing.

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Maintenance of Services A. Reseller will adopt and adhere to the standards contained in the applicable BellSouth Work Center Interface Agreement regarding maintenance and installation of service. B. Services resold under the Company’s Tariffs and facilities and equipment provided by the Company shall be maintained by the Company. C. Reseller or its end users may not rearrange, move, disconnect, remove or attempt to repair any facilities owned by the Company, other than by connection or disconnection to any interface means used, except with the written consent of the Company. D. Reseller accepts responsibility to notify the Company of situations that arise that may result in a service problem. E. Reseller will be the Company's single point of contact for all repair calls on behalf of Reseller’s end users. The parties agree to provide one another with toll-free contact numbers for such purposes. F. Reseller will contact the appropriate repair centers in accordance with procedures established by the Company. G. For all repair requests, Reseller accepts responsibility for adhering to the Company's prescreening guidelines prior to referring the trouble to the Company. H. The Company will xxxx Reseller for handling troubles that are found not to be in the Company's network pursuant to its standard time and material charges. The standard time and material charges will be no more than what BellSouth charges to its retail customers for the same services. I. The Company reserves the right to contact Reseller’s customers, if deemed necessary, for maintenance purposes.

  • Management Responsibility No Limited Partner, as such, shall take part in the management of the business or transact any business for the Partnership.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Client Responsibility For clarity, the parties agree that in reviewing the documents referred to in clause (b) above, Patheon’s role will be limited to verifying the accuracy of the description of the work undertaken or to be undertaken by Patheon. Subject to the foregoing, Patheon will not assume any responsibility for the accuracy of any application for receipt of an approval by a Regulatory Authority. The Client is solely responsible for the preparation and filing of the application for approval by the Regulatory Authority and any relevant costs will be borne by the Client.

  • Payment Responsibility The payment obligations of each Participating Manufacturer pursuant to this Agreement shall be the several responsibility only of that Participating Manufacturer. The payment obligations of a Participating Manufacturer shall not be the obligation or responsibility of any Affiliate of such Participating Manufacturer. The payment obligations of a Participating Manufacturer shall not be the obligation or responsibility of any other Participating Manufacturer. Provided, however, that no provision of this Agreement shall waive or excuse liability under any state or federal fraudulent conveyance or fraudulent transfer law. Any Participating Manufacturer whose Market Share (or Relative Market Share) in any given year equals zero shall have no payment obligations under this Agreement in the succeeding year.

  • Joint Responsibility If the Seller determines that the Interface Problem is attributable partially to the design of a Warranted Part and partially to the design of any Supplier Part, the Seller will, if so requested by the Buyer, seek a solution to the Interface Problem through cooperative efforts of the Seller and any Supplier involved. The Seller will promptly advise the Buyer of such corrective action as may be proposed by the Seller and any such Supplier. Such proposal will be consistent with any then existing obligations of the Seller hereunder and of any such Supplier towards the Buyer. Such corrective action, unless reasonably rejected by the Buyer, will constitute full satisfaction of any claim the Buyer may have against either the Seller or any such Supplier with respect to such Interface Problem.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!