Order and Order Confirmation Sample Clauses

Order and Order Confirmation. Within five (5) business days of receiving an order, the Supplier shall send an order confirmation to Coor in which the Supplier confirms the order and delivery date. Both the order and the order confirmation shall be in writing.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Order and Order Confirmation. 6.1 Date of delivery is the date when the products reach the Purchaser. 6.2 In case of temporary delays for the entire or parts of the Supplier's assortment, the responsible Purchaser at LC shall be informed. 6.3 Order confirmation shall be sent to the purchaser within 24 hours and shall set out the time of delivery. In case of changes to the requested date of delivery or changes to the earlier communicated time of delivery, a new time of delivery shall be communicated to the purchaser.
Sample 1Sample 2
Order and Order Confirmation. 1. Our offers are non-binding. Documents (figures, drawings, technical data sheets, etc.), measures and weights which are part of the offer are binding only if expressly designated in writing as binding for the customer. In all other respects, they are non-binding. 2. We retain the copyright to supplied documents; such documents may only be made accessible to third parties with our prior written consent. 3. An order of the customer is deemed accepted by us only if we have confirmed acceptance in writing by an order confirmation. The order confirmation is decisive for the scope of the whole Contract contents. This also applies in case the actual delivery of the ordered goods occurs before transmission of the order confirmation. 4. Side agreements, representations and warranties and all other agreements are only valid with our prior express written confirmation.
Sample 1Sample 2
Order and Order Confirmation. Contracts within the meaning of Clause 1(1)) shall be formed by means of an order placed by Maximator (hereinafter referred to as "Order") and an order confirmation by the Supplier (hereinafter referred to as "Order Confirmation"). An Order Confirmation shall not be necessary if the Supplier supplies the ordered Goods or Works to Maximator, in accordance with these Terms and Conditions of Purchase, within the delivery or service deadline specified in the Order or, if delivery or service deadline are not specified in the Order and have not been agreed elsewhere, within 10 working days of receipt of the Order. Orders must be in written or electronic form. The Order Confirmation must always be provided without delay, indicating the precise order number, quantity, price and discount. If the Supplier is unable to adhere to the delivery or service deadline specified in the Order, it must indicate the shortest binding delivery time, which shall, however, require our counter-confirmation. If a delivery or service deadline is not specified in the Order and has not been agreed elsewhere, it shall be 10 working days from the time the contract is formed.
Sample 1
Order and Order Confirmation. As a logged in Awaio user, you can purchase the workplace service through the Application. After placing the booking you will get an order confirmation via the user interface of the Application.
Sample 1
Order and Order Confirmation. 2.1 Our order shall be deemed binding no sooner than upon written submission or confirmation. The Supplier must point out obvious errors (e.g. textual and calculation errors) and incompleteness of the order, including the order documents, to us for the purpose of correction or completion before acceptance; otherwise the contract shall be deemed not to have been concluded. 2.2 The Supplier is required to confirm our order in writing within seven (7) calendar days, stating our complete order information (orderer, order number) and the Supplier’s order number, or in particular to execute such without reservation by dispatching the goods (acceptance). Delayed acceptance shall be deemed a new offer and requires that we accept it.
Sample 1
Order and Order Confirmation. By ordering or using a service provided by Online Partner, the customer accepts these terms and conditions.
Sample 1
AutoNDA by SimpleDocs
Order and Order Confirmation. 2.1 A training can be booked via the website, by phone, or by email. For phone or email bookings, the client will receive a registration form and a preliminary appointment confirmation along with the delivery terms. Upon approval, a final appointment confirmation will be sent by email. Open registrants can fill in the registration form on the website and agree to the delivery terms during the booking process. After registration/payment, the invoice and appointment confirmation will be sent to the participant and/or client by email.
Sample 1
Order and Order Confirmation. As a logged in Krubb user, you can place an order for a product, a food item, a prepared grocery bag or other items through the Application or Website. After placing the order you will get an order confirmation via the user interface of the Application or Website.
Sample 1

Related to Order and Order Confirmation

  • Order Confirmation All TIPS Member Agreement purchase orders are approved daily by TIPS and sent to vendor. The vendor should confirm receipt of orders to the TIPS Member (customer) within 3 business days. • Vendor custom website for TIPS: If Vendor is hosting a custom TIPS website, updated pricing when effective. TIPS shall be notified when prices change in accordance with the award.

  • Daily Order Confirmation All Agreement purchase orders will be approved daily by TIPS and sent to vendor. The vendor must confirm receipt of orders to the TIPS Member (customer) within 24 business hours. • Vendor custom website for TIPS: If Vendor is hosting a custom TIPS website, then updated pricing must be posted by 1st of each month.

  • Scope and Order Placement These terms may be used by Customer either for a single Order or as a framework for multiple Orders. In addition, these terms may be used on a global basis by the parties’ “Affiliates”, meaning any entity controlled by, controlling, or under common control with a party. The parties can confirm their agreement to these terms either by signature where indicated at the end or by referencing these terms on Orders. Affiliates participate under these terms by placing orders which specify product or service delivery in the same country as the HP Affiliate accepting the Order, referencing these terms, and specifying any additional terms or amendments to reflect local law or business practices.

  • Order to Stop Work The Commission, may, by written order to Contractor/Vendor at any time, and without notice to any Surety, require Contractor/Vendor to stop all or any part of the work called for by this contract. This order shall be for a specified period not exceeding 90 days after the order is delivered to Contractor/Vendor, unless the parties agree to any further period. Any such order shall be identified specifically as a stop work order issued pursuant to this clause. Upon receipt of such an order, Contractor/Vendor shall forthwith comply with its terms and take all reasonable steps to minimize the occurrence of costs allocable to the work covered by the order during the period of work stoppage. Before the stop work order expires, or within any further period to which the parties shall have agreed, the Commission shall either: Cancel the stop work order; or, Terminate the work covered by such order as provided in the Termination for Default clause or the Termination for Convenience clause of this Contract.

  • SALES AND ORDER PROCESSING CHARGE Contractor shall sell its products to END USERS based on the pricing and terms of this Agreement. H-GAC will invoice Contractor for the applicable order processing charge when H-GAC receives notification of an END USER order. Contractor shall remit to H-GAC the full amount of the applicable order processing charge, after delivery of any product or service and subsequent END USER acceptance. Payment of the Order Processing Charge shall be remitted from Contractor to H-GAC, within thirty (30) calendar days or ten (10) business days after receipt of an END USER’s payment, whichever comes first, notwithstanding Contractor’s receipt of invoice. For sales made by Contractor based on this Agreement, including sales to entities without Interlocal Agreements, Contractor shall pay the applicable order processing charges to H-GAC. Further, Contractor agrees to encourage entities who are not members of H-GAC’s Cooperative Purchasing Program to execute an H-GAC Interlocal Agreement. H-GAC reserves the right to take appropriate actions including, but not limited to, Agreement termination if Contractor fails to promptly remit the appropriate order processing charge to H-GAC. In no event shall H-GAC have any liability to Contractor for any goods or services an END USER procures from Contractor. At all times, Contractor shall remain liable to pay to H-GAC any order processing charges on any portion of the Agreement actually performed, and for which compensation was received by Contractor.

  • Order Coordination and Order Coordination-Time Specific 2.1.9.1 “Order Coordination” (OC) allows BellSouth and Lightyear to coordinate the installation of the SL2 Loops, Unbundled Digital Loops (UDL) and other Loops where OC may be purchased as an option, to Lightyear’s facilities to limit end user service outage. OC is available when the Loop is provisioned over an existing circuit that is currently providing service to the end user. OC for physical conversions will be scheduled at BellSouth’s discretion during normal working hours on the committed due date. OC shall be provided in accordance with the chart set forth below. 2.1.9.2 “Order Coordination – Time Specific” (OC-TS) allows Lightyear to order a specific time for OC to take place. BellSouth will make every effort to accommodate Lightyear’s specific conversion time request. However, BellSouth reserves the right to negotiate with Lightyear a conversion time based on load and appointment control when necessary. This OC-TS is a chargeable option for all Loops except Unbundled Copper Loops (UCL) and Universal Digital Channel (UDC), and is billed in addition to the OC charge. Lightyear may specify a time between 9:00 a.m. and 4:00 p.m. (location time) Monday through Friday (excluding holidays). If Lightyear specifies a time outside this window, or selects a time or quantity of Loops that requires BellSouth technicians to work outside normal work hours, overtime charges will apply in addition to the OC and OC-TS charges. Overtime charges will be applied based on the amount of overtime worked and in accordance with the rates established in the Access Services Tariff, Section E13.2, for each state. The OC-TS charges for an order due on the same day at the same location will be applied on a per Local Service Request (LSR) basis.

  • Attachment  C_ CONTRACT AFFIRMATIONS For purposes of these Contract Affirmations, HHS includes both the Health and Human Services Commission (HHSC) and the Department of State Health Services (DSHS). System Agency refers to HHSC, DSHS, or both, that will be a party to this Contract. These Contract Affirmations apply to all Contractors and Grantees (referred to as “Contractor”) regardless of their business form (e.g., individual, partnership, corporation). By entering into this Contract, Contractor affirms, without exception, understands, and agrees to comply with the following items through the life of the Contract:

  • Purchase Order and Sales Contact Name Please identify the individual who will be responsible for receiving and processing purchase orders and sales under the TIPS Contract.

  • Forecasts and Orders 7.3.1 Not less than [*****] days prior to the first day of each calendar quarter (commencing with the first calendar quarter in which Intrexon, its sublicensees or their respective Affiliates order API from Halozyme hereunder), Intrexon shall prepare and provide Halozyme with a written forecast of its good faith estimated requirements for API under this Section 7.3 for each of the subsequent [*****] calendar quarters. Intrexon shall not (a) increase or decrease the quantity estimated for the [*****] quarterly period of each forecast from the quantity estimated for the [*****] quarterly period of the previous forecast, (b) increase or decrease the quantity estimated for the [*****] quarterly periods of each forecast by more than [*****] percent ([*****]%) of the quantity estimated for the [*****] quarterly periods of the previous forecast, respectively, without the prior express written consent of Halozyme. The quantities estimated for the [*****] quarterly periods of each forecast shall be non-binding, and for planning purposes only. 7.3.2 Intrexon shall be required to purchase [*****] of the quantity forecasted for each API under this Section 7.3 for the first and second quarterly periods of each forecast under Section 7.3.1. 7.3.3 Halozyme shall be required to supply the quantity of API ordered by Intrexon under this Section 7.3 in any calendar quarter up to [*****] percent ([*****]%) of the quantity forecasted for the [*****] quarterly period of the most recent forecast. If Intrexon’s Portions herein identified by [*****] have been omitted pursuant to a request for confidential treatment under Rule 24b-2 of the Securities Exchange Act of 1934, as amended. A complete copy of this document has been filed separately with the Securities and Exchange Commission. orders in any calendar quarter exceed [*****] percent ([*****]%) of the quantity forecasted for the [*****] quarterly period of the most recent forecast, Halozyme shall use commercially reasonable efforts to supply such excess. Halozyme shall use commercially reasonable efforts to meet Intrexon’s delivery requirements specified in accordance with Section 7.3.4. In the event of a shortfall to forecast, Halozyme shall use commercially reasonable efforts to apportion API among Intrexon and its other customers on a pro rata basis according to their respective forecasts. 7.3.4 Intrexon shall make all purchases under this Section 7.3 by submitting firm purchase orders to Halozyme. Each such purchase order shall be in writing in a form reasonably acceptable to Halozyme, and shall specify the quantity of API ordered, the place of delivery and the required delivery date therefor, which shall not be less than [*****] days after the date of such purchase order. No additional terms of any such purchase order shall be binding on Halozyme and are expressly rejected hereby. In the event of a conflict between the terms and conditions of any purchase order and this Agreement, the terms and conditions of this Agreement shall prevail.

  • Minimum Site Requirements for TIPS Sales (when applicable to TIPS Sale). Cleanup: When performing work on site at a TIPS Member’s property, Vendor shall clean up and remove all debris and rubbish resulting from their work as required or directed by the TIPS Member or as agreed by the parties. Upon completion of work, the premises shall be left in good repair and an orderly, neat, clean and unobstructed condition. Preparation: Vendor shall not begin a project for which a TIPS Member has not prepared the site, unless Vendor does the preparation work at no cost, or until TIPS Member includes the cost of site preparation in the TIPS Sale Site preparation includes, but is not limited to: moving furniture, installing wiring for networks or power, and similar pre‐installation requirements. Registered Sex Offender Restrictions: For work to be performed at schools, Vendor agrees that no employee of Vendor or a subcontractor who has been adjudicated to be a registered sex offender will perform work at any time when students are, or reasonably expected to be, present unless otherwise agreed by the TIPS Member. Vendor agrees that a violation of this condition shall be considered a material breach and may result in the cancellation of the TIPS Sale at the TIPS Member’s discretion. Vendor must identify any additional costs associated with compliance of this term. If no costs are specified, compliance with this term will be provided at no additional charge. Safety Measures: Vendor shall take all reasonable precautions for the safety of employees on the worksite, and shall erect and properly maintain all necessary safeguards for protection of workers and the public. Vendor shall post warning signs against all hazards created by the operation and work in progress. Proper precautions shall be taken pursuant to state law and standard practices to protect workers, general public and existing structures from injury or damage. Smoking: Persons working under Agreement shall adhere to the TIPS Member’s or local smoking statutes, codes, ordinances, and policies.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!