Police Heavy Duty Wrecker Designation Sample Clauses

Police Heavy Duty Wrecker Designation. 2.01 The Operator represents that he is familiar with the provisions of Article III of Chapter 8 of the Code of Ordinances of Houston, Texas, as amended, which are hereby incorporated into and made a part of this Agreement by reference. Without limitation, the provisions of Section 8-126(e) of the Code of Ordinances, A. Automobile Liability Insurance $1,000,000 combined single limit per occurrence B. Cargo on Hook Coverage or equivalent in the amount of $50,000 per vehicle C. Workers Compensation or Occupational Safety Insurance D. All drivers of heavy-duty wreckers shall be named insured on Operator's liability insurance policy. Operator shall provide City with new certificate of insurance if additional drivers are added. The Operator agrees to comply with the said provisions and the other terms and conditions of this Agreement in providing heavy-duty wrecker services. It is expressly understood and agreed that any amendments hereafter adopted by the City Council of the City of Houston, Texas, will become part of this Agreement by reference upon their effective date. It shall be the obligation of the Operator to take notice of such amendments by virtue of their adoption, and the City shall not be obligated to provide any personal notice of such amendments to the Operator. The Operator shall charge no fees for servicing a police scene in excess of the fees authorized under city ordinance for vehicles towed without the consent of a vehicle owner. Further, the Operator shall not obligate the owner of a vehicle removed from a police scene and placed in storage to pay any fees in excess of those authorized for a vehicle delivered to a state licensed vehicle storage facility without the consent of the vehicle owner. Under no circumstances will a vehicle owner be charged a fee of any type in excess of the fees applicable had the vehicle been towed without the vehicle owner’s consent. Operator agrees not to respond to a police scene with a heavy-duty wrecker unless summoned by the law enforcement officer in charge of the police scene. Operator agrees to comply with heavy-duty wrecker regulations promulgated by the Houston Police Department and attached hereto as Exhibit “A“. Operator agrees to maintain the ability to accept and process the following form of payment: credit cards. Operator agrees to maintain the ability to accept at least two major credit card issuers of the following: VISA, MasterCard, American Express, and Discover Card. Furthermore, all credit ...
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Police Heavy Duty Wrecker Designation. 2.01 The Operator represents that he is familiar with the provisions of Article III of Chapter 8 of the Code of Ordinances of Houston, Texas, as amended, which are hereby incorporated into and made a part of this Agreement by reference. "Operator shall be assigned to a rotation list more specifically described in Exhibit “A” for each heavy-duty wrecker that is to be utilized by the Operator to perform police-authorized heavy-duty tows. Operator shall not allow a heavy- duty wrecker to perform a non-consent heavy-duty tow of any vehicle outside of the approved heavy-duty rotation list, except when authorized by HPD.
Sample 1Sample 2Sample 3

Related to Police Heavy Duty Wrecker Designation

  • Project Administration Designation Pursuant to Paragraph (B) of Rule 164-1-21 of the Administrative Code, the Recipient shall designate its Chief Executive Officer, Chief Fiscal Officer and Project Manager in Appendix B of this Agreement. Changes in these designations must be made in writing.

  • Unbundled Copper Loop – Designed (UCL-D) 2.4.2.1 The UCL-D will be provisioned as a dry copper twisted pair (2- or 4-wire) Loop that is unencumbered by any intervening equipment (e.g., filters, load coils, range extenders, digital loop carrier, or repeaters). 2.4.2.2 A UCL-D will be 18,000 feet or less in length and is provisioned according to Resistance Design parameters, may have up to 6,000 feet of bridged tap and will have up to 1300 Ohms of resistance. 2.4.2.3 The UCL-D is a designed circuit, is provisioned with a test point, and comes standard with a DLR. OC is a chargeable option for a UCL-D; however, OC is always required on UCLs where a reuse of existing facilities has been requested by Telepak Networks. 2.4.2.4 These Loops are not intended to support any particular services and may be utilized by Telepak Networks to provide a wide-range of telecommunications services as long as those services do not adversely affect BellSouth’s network. This facility will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the Loop to the customer’s inside wire. 2.4.2.5 Upon the Effective Date of this Agreement, Unbundled Copper Loop – Long (UCL-L) elements will no longer be offered by BellSouth and no new orders for UCL-L will be accepted. Any existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement will be grandfathered at the rates set forth in the Parties’ interconnection agreement that was in effect immediately prior to the Effective Date of this Agreement. Existing UCL-Ls that were provisioned prior to the Effective Date of this Agreement may remain connected, maintained and repaired according to BellSouth’s TR73600 and may remain connected until such time as they are disconnected by Telepak Networks or BellSouth provides ninety

  • Unbundled Copper Loop – Non-Designed (UCL-ND 2.4.3.1 The UCL–ND is provisioned as a dedicated 2-wire metallic transmission facility from BellSouth’s Main Distribution Frame to a customer’s premises (including the NID). The UCL-ND will be a “dry copper” facility in that it will not have any intervening equipment such as load coils, repeaters, or digital access main lines (“DAMLs”), and may have up to 6,000 feet of bridged tap between the end user’s premises and the serving wire center. The UCL-ND typically will be 1300 Ohms resistance and in most cases will not exceed 18,000 feet in length, although the UCL-ND will not have a specific length limitation. For loops less than 18,000 feet and with less than 1300 Ohms resistance, the loop will provide a voice grade transmission channel suitable for loop start signaling and the transport of analog voice grade signals. The UCL-ND will not be designed and will not be provisioned with either a DLR or a test point. 2.4.3.2 The UCL-ND facilities may be mechanically assigned using BellSouth’s assignment systems. Therefore, the Loop Make Up process is not required to order and provision the UCL-ND. However, Lightyear can request Loop Make Up for which additional charges would apply. 2.4.3.3 At an additional charge, BellSouth also will make available Loop Testing so that Lightyear may request further testing on the UCL-ND. Rates for Loop Testing are as set forth in Exhibit B of this Attachment. 2.4.3.4 UCL-ND loops are not intended to support any particular service and may be utilized by Lightyear to provide a wide-range of telecommunications services so long as those services do not adversely affect BellSouth’s network. The UCL-ND will include a Network Interface Device (NID) at the customer’s location for the purpose of connecting the loop to the customer’s inside wire. 2.4.3.5 Order Coordination (OC) will be provided as a chargeable option and may be utilized when the UCL-ND provisioning is associated with the reuse of BellSouth facilities. Order Coordination -Time Specific (OC-TS) does not apply to this product. 2.4.3.6 Lightyear may use BellSouth’s Unbundled Loop Modification (ULM) offering to remove bridge tap and/or load coils from any loop within the BellSouth network. Therefore, some loops that would not qualify as UCL-ND could be transformed into loops that do qualify, using the ULM process.

  • Substance Abuse Treatment Information Substance abuse treatment information shall be maintained in compliance with 42 C.F.R. Part 2 if the Party or subcontractor(s) are Part 2 covered programs, or if substance abuse treatment information is received from a Part 2 covered program by the Party or subcontractor(s).

  • Responsibilities of Business Associate Business Associate agrees:

  • Drug-Free Workplace Contractor represents and warrants that it shall comply with the applicable provisions of the Drug-Free Work Place Act of 1988 (41 U.S.C. §701 et seq.) and maintain a drug-free work environment.

  • DRUG AND ALCOHOL FREE WORKPLACE 20.1 All employees must report to work in a condition fit to perform their assigned duties unimpaired by alcohol or drugs.

  • Enterprise Information Management Standards Grantee shall conform to HHS standards for data management as described by the policies of the HHS Office of Data, Analytics, and Performance. These include, but are not limited to, standards for documentation and communication of data models, metadata, and other data definition methods that are required by HHS for ongoing data governance, strategic portfolio analysis, interoperability planning, and valuation of HHS System data assets.

  • Proposing Integration Activities in the Planning Submission No integration activity described in section 6.3 may be proposed in a CAPS unless the Funder has consented, in writing, to its inclusion pursuant to the process set out in section 6.3(b).

  • Power Factor Design Criteria (Reactive Power A wind generating plant shall maintain a power factor within the range of 0.95 leading to 0.95 lagging, measured at the Point of Interconnection as defined in this LGIA, if the ISO’s System Reliability Impact Study shows that such a requirement is necessary to ensure safety or reliability. The power factor range standards can be met using, for example without limitation, power electronics designed to supply this level of reactive capability (taking into account any limitations due to voltage level, real power output, etc.) or fixed and switched capacitors if agreed to by the Connecting Transmission Owner for the Transmission District to which the wind generating plant will be interconnected, or a combination of the two. The Developer shall not disable power factor equipment while the wind plant is in operation. Wind plants shall also be able to provide sufficient dynamic voltage support in lieu of the power system stabilizer and automatic voltage regulation at the generator excitation system if the System Reliability Impact Study shows this to be required for system safety or reliability.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!