Protection and Cleaning Sample Clauses

Protection and Cleaning. 29.(1) The Contractor shall protect and preserve the work from all damage or accident providing any temporary roof, window and door coverings, boxing or other construction as required by the Engineer. This protection shall be provided for all property adjacent to the site as well as on the site.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Protection and Cleaning. All aluminium must be protected against damage by covering with temporary casings (masking tape, plastic coatings, etc.), and against deterioration or discolouration caused by mortar, wax, paint, etc., all to the entire satisfaction of the Principal Agent. On completion, all such protection shall be removed, and work cleaned down and left in proper working order. All glazing is to be protected from damage, breakage, scratches, etc., and allowances shall be made for polishing the glass as and when instructed by the Main Contractor. PRESSED STEEL DOOR FRAMES 1,2mm Thick double rebated frames suitable for half brick walls complete with hoop iron anchors welded to frame, one adjustable stainless steel striking plate suitable for cylinder locks, three rubber shock absorbers in rebate and one pair of 100mm standard heavy duty brass butt hinges welded to frame: Frame for door size 813 x 2032mm high. Frame for door size 964 x 2032mm high. SUNDRY GALVANIZED STEELWORK Bearers to brick linings, lintels, etc.: 25 x 25 x 3mm Thick angle section framing with one leg bolted to concrete with and including M6 x 50mm bolts and other leg screw fixed to wrought wood timber frame. ALUMINIUM WINDOWS, DOORS, ETC. Work group No 140 for JBCC CPAP purposes Carried to Collection Section No. 2 Bill No. 11 PREPARED FOR: Xxx Xxxxxxxx Associates Architects No No m 20 2 420 R Supplementary Preambles Aluminium and glazing shall comply with the following specifications: Minimum performance requirements as published by AAMSA; Aluminium alloy extrusion BSS 1474. Aluminium alloy sheets SANS 903. Anodising SANS 999. Neoprene performed seals and gaskets SATM C542 Powder coat finishing SANS 1274 and 1578 (with a test certificate available on request). National Building Regulations Part "N", SANS 0137, SANS 0400, SANS 1263 and AAMSA Selection guide for Safety Glazing Materials: monolithic obscure and float glass thicknesses and glazing, shall comply strictly to these specifications. DOORS, WINDOWS, ETC. to be manufactured by an approved firm of specialists, to be of the best quality and design truly square and unless otherwise described, prepared to receive glazing beads from the outside. All opening portions must fit perfectly on all faces and be so hung as to open and close freely without binding at any point. Wherever possible, all angles and intersections to be welded by electric welding, argon or arc welding. A sample window is to be submitted to the Employer for approval before the work is ...
Sample 1
Protection and Cleaning. 1. The Contractor shall be responsible for protecting finished surfaces from damage during fabrication, shipping, storage, and testing. Method of Measurement: This item will be paid by each. Basis of Payment: This item will be paid at the Contract Price for “Equipment Rack” which price shall include all administrative and procedural requirements, equipment, labor, testing, materials, and work incidental therto. PAY ITEM PAY UNIT Equipment Rack Each ITEM #1108539A - MODIFY EXISTING OPERATIONS CENTER CONTROL SYSTEM‌‌
Sample 1
Protection and Cleaning. A. Protect glass from contact with contaminating substances resulting from construction operations. Remove any such substances by method approved by glass manufacturer.
Sample 1
Protection and Cleaning a.During installation of fixtures and accessories and until final acceptance, protect items with strippable plastic or other approved means to maintain fixtures in perfect conditions.
Sample 1
Protection and Cleaning 
Sample 1

Related to Protection and Cleaning

  • Media preservation and protection When a Contractor discovers a cyber incident has occurred, the Contractor shall preserve and protect images of all known affected information systems identified in paragraph (c)(1)(i) of this clause and all relevant monitoring/packet capture data for at least 90 days from the submission of the cyber incident report to allow DoD to request the media or decline interest.

  • Protection and Treatment of Investments 1. Each Contracting Party shall protect within its territory investments made in accordance with its laws and regulations by investors of the other Contracting Party and shall not impair by unreasonable or discriminatory measures the management, maintenance, use, enjoyment, extension, sale and should it so happen, liquidation of such investments.

  • - INCOME PROTECTION AND WORKERS COMPENSATION 2301 A nurse having accumulated income protection may claim basic pay for such income protection against such accumulation with respect to periods during which:

  • Preservation, Maintenance, and Protection of the Property Inspections. Borrower will not destroy, damage, or impair the Property, allow the Property to deteriorate, or commit waste on the Property. Whether or not Borrower is residing in the Property, Borrower must maintain the Property in order to prevent the Property from deteriorating or decreasing in value due to its condition. Unless Lender determines pursuant to Section 5 that repair or restoration is not economically feasible, Borrower will promptly repair the Property if damaged to avoid further deterioration or damage. If insurance or condemnation proceeds are paid to Lender in connection with damage to, or the taking of, the Property, Borrower will be responsible for repairing or restoring the Property only if Xxxxxx has released proceeds for such purposes. Lender may disburse proceeds for the repairs and restoration in a single payment or in a series of progress payments as the work is completed, depending on the size of the repair or restoration, the terms of the repair agreement, and whether Borrower is in Default on the Loan. Lender may make such disbursements directly to Borrower, to the person repairing or restoring the Property, or payable jointly to both. If the insurance or condemnation proceeds are not sufficient to repair or restore the Property, Borrower remains obligated to complete such repair or restoration. Lender may make reasonable entries upon and inspections of the Property. If Lender has reasonable cause, Xxxxxx may inspect the interior of the improvements on the Property. Lender will give Borrower notice at the time of or prior to such an interior inspection specifying such reasonable cause.

  • Promotion and Protection of Investments Each Contracting Party shall promote and encourage in its Territory investments of Investors of the other Contracting Party and accept such investments in accordance with its laws and regulations and accord them equitable and reasonable treatment and protection. Such investments shall be subject to the laws and regulations of the Contracting Party in the Territory of which the investments are made.

  • Protection of Watershed PURCHASER shall take all necessary precautions to prevent damage to stream banks, any stream course, lake, reservoir, or forested wetland within or adjacent to the timber sale area. Definitions of Type F, Type D, and Type N streams contained in the Forest Practices Act apply to this contract. In addition to other protective measures required, PURCHASER shall discontinue all or part of the operations under this contract upon notice from STATE that operations will cause excessive damage to the watershed.

  • Protection of the Environment 14.1 The Government and the Contractor recognise that Petroleum Operations will cause some impact on the environment in the Contract Area. Accordingly, in performance of the Contract, the Contractor shall conduct its Petroleum Operations with due regard to concerns with respect to protection of the environment and conservation of natural resources and shall in particular;

  • Promotion and Protection of Investment (1) Each Contracting Party shall encourage and create favourable conditions for investors of the other Contracting Party to make investments in its territory, and admit such investments in accordance with its laws and policy.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!