Receipt Point Gas Quality Specifications Sample Clauses

Receipt Point Gas Quality Specifications. Gas delivered by Shipper to the Receipt Points shall meet the following specifications (collectively, the “Gas Quality Specifications”): (a) The Gas shall not contain any of the following in excess of: one-quarter (1/4) grain of hydrogen sulfide per hundred (100) cubic feet; one (1) grain of total sulfur per hundred (100) cubic feet; two one-hundredths of one percent (0.02%) by volume of oxygen; or two percent (2%) by volume of nitrogen. (b) The total of all non-hydrocarbon gases shall not exceed three percent (3%) by volume. (c) The temperature of the Gas at the Receipt Point shall not be in excess of one hundred twenty (120) degrees Fahrenheit. (d) The Gas shall be free of solids, sand, salt, dust, gums, crude oil, and hydrocarbons in the liquid phase, and other objectionable substances which may be injurious to pipelines or which may interfere with the measurement, transmission or commercial utilization of said Gas. Except for items (a) through (d) above, such Gas shall meet the most restrictive quality specifications required from time to time by the Downstream Pipelines receiving Delivery Point Gas, except for water vapor content, for which there shall be no specification applicable at the Receipt Points.
Sample 1Sample 2Sample 3See All (11)
AutoNDA by SimpleDocs
Receipt Point Gas Quality Specifications. Gas delivered by or for the account of Producer to each Receipt Point shall meet the following specifications (collectively, the “Gas Quality Specifications”): (a) The Gas shall not contain any of the following in excess of: one-quarter (1/4) grain of hydrogen sulfide per hundred (100) Cubic Feet; one (1) grain of total sulfur per hundred (100) Cubic Feet; two one-hundredths of one percent (0.02%) by volume of oxygen; or two percent (2%) by volume of nitrogen. (b) The total of all non-hydrocarbon gases shall not exceed three percent (3%) by volume. (c) The temperature of the Gas at the Receipt Point shall not be less than forty (40) degrees Fahrenheit or in excess of one hundred twenty (120) degrees Xxxxxxxxxx. (x) The Gas shall be free of solids, sand, salt, dust, gums, crude oil, and hydrocarbons in the liquid phase, and other objectionable substances which may be injurious to pipelines or which may interfere with the measurement, transmission or commercial utilization of said Gas. (e) The Gas shall have a Gross Heating Value of less than 1100 Btu per million cubic feet of Gas. (f) Prior to the installation of a System Compressor Station placing a Receipt Points(s) on suction, each Receipt Point shall have a water vapor content of five (5) pounds per Cubic Foot of Gas. Except for items (a) through (f) above, such Gas shall meet the most restrictive quality specifications required from time to time by the Downstream Pipelines receiving Delivery Point Gas, except for water vapor content, for which there shall be no specification applicable at the Receipt Points.
Sample 1Sample 2Sample 3See All (4)
Receipt Point Gas Quality Specifications. Gas delivered by or for the account of Producer to each Receipt Point shall meet the specifications set forth on Exhibit G (collectively, the “Gas Quality Specifications”).
Sample 1Sample 2See All (4)
Receipt Point Gas Quality Specifications. Gas delivered by or for the account of Shipper to each Receipt Point shall meet the following specifications (collectively, the “Gas Quality Specifications”): (a) less than two mole percent of carbon dioxide; (b) not more than 1/4 grain H2S per 100 Cubic Feet, such 1/4 grain H2S per 100 Cubic Feet specification shall apply based on the aggregate volume weighted average Receipt Point quality as calculated upstream of each System Compressor Station [omitted]; (c) not more than 1/4 grain of mercaptan sulphur per 100 Cubic Feet, such 1/4 grain mercaptan sulphur per 100 Cubic Feet specification shall apply based on the aggregate volume weighted average Receipt Point quality as calculated upstream of each System Compressor Station; (d) a Gross Heating Value per Cubic Foot of not less than 1,100 BTU; (e) not more than a total of three mole percent of total inert or non-hydrocarbon gases (nitrogen, carbon dioxide, etc.) and contain no more than 2.0% by volume carbon dioxide; provided that for purposes of the total inert specification and carbon dioxide, such three mole percent total inert specification and 2.0% carbon dioxide specification shall apply based on the aggregate volume weighted average Receipt Point quality; (f) not more than two grains of total sulfur per 100 Cubic Feet (including hydrogen sulfide and mercaptan), such two grains of total sulfur per 100 Cubic Feet specification shall apply based on the aggregate volume weighted average Receipt Point quality as calculated upstream of each System Compressor Station; (g) an oxygen content not in excess of 0.001% by volume; provided that the Parties shall use every reasonable effort to keep the gas free from oxygen; (h) a temperature not to exceed 100 degrees Fahrenheit; and (i) free of water, crude and/or Condensate in the liquid phase, impurities and other objectionable substances; provided that to the extent the quality specifications required from time to time by the Downstream Pipelines receiving Residue Gas are more restrictive than any of the foregoing requirements (except for water vapor content, Gross Heating Value and hydrocarbon dew point for such Downstream Pipelines), then the quality specifications required by the Downstream Pipeline shall apply instead of the foregoing applicable specification. Neither Gatherer nor Shipper will propose or support any changes to the Downstream Pipeline specifications that would result in more restrictive specifications. [Omitted].
Sample 1
Receipt Point Gas Quality Specifications. Shipper’s Gas delivered to the Receipt Points shall meet the applicable Receipt Point Gas Quality Specifications.
Sample 1

Related to Receipt Point Gas Quality Specifications

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Delivery Points ‌ Project water made available to the Agency pursuant to Article 6 shall be delivered to the Agency by the State at the delivery structures established in accordance with Article 10.

  • Delivery Point The delivery point is the point of delivery of the Power Product to the CAISO Controlled Grid (the “Delivery Point”). Seller shall provide and convey to Buyer the Power Product from the Generating Facility at the Delivery Point. Title to and risk of loss related to the Power Product transfer from Seller to Buyer at the Delivery Point.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Equipment Specifications All equipment must meet the contract specifications and all federal and State safety codes and regulations in effect at the date of manufacture. All equipment must be Original Equipment Manufacturer (OEM) equipment unless otherwise stated in the contract. All products, materials, supplies, replacement parts, and equipment offered and furnished must be new, of current manufacturer production, and must have been formally announced by the manufacturer as being commercially available, unless otherwise stated in this Contract.

  • Service Specification The Parties have agreed upon the scope and specification of the Services provided under this Service Agreement in the Service Specification.

  • Contract Quantity The Contract Quantity during each Contract Year is the amount set forth in the applicable Contract Year in Section D of the Cover Sheet (“Delivery Term Contract Quantity Schedule”), which amount is inclusive of outages.

  • Interconnection Customer Provided Services The services provided by Interconnection Customer under this LGIA are set forth in Article 9.6 and Article 13.5. 1. Interconnection Customer shall be paid for such services in accordance with Article 11.6.

  • Product Specifications (a) Supplier shall manufacture all Products according to the Specifications in effect as of the date of this Agreement, with such changes or additions to the Specifications of the Products related thereto as shall be requested by Buyer in accordance with this Section or as otherwise agreed in writing by the Parties. All other Products shall be manufactured with such Specifications as the Parties shall agree in writing. (b) Buyer may request changed or additional Specifications for any Product by delivering written notice thereof to Supplier not less than one hundred twenty (120) days in advance of the first Firm Order for such Product to be supplied with such changed or additional Specifications. Notwithstanding the foregoing, if additional advance time would reasonably be required in order to implement the manufacturing processes for production of a Product with any changed or additional Specifications, and to commence manufacture and delivery thereof, Supplier shall so notify Buyer, and Supplier shall not be required to commence delivery of such Product until the passage of such additional time. (c) Supplier shall be required to accommodate any change of, or additions to, the Specifications for any Product, if and only if (i) in Supplier’s good faith judgment, such changed or additional Specifications would not require Supplier to violate good manufacturing practice, (ii) the representation and warranty of Buyer deemed made pursuant to Subsection (e) below is true and correct, and (iii) Buyer agrees to reimburse Supplier for the incremental costs and expenses incurred by Supplier in accommodating the changed or additional Specifications, including the costs of acquiring any new machinery and tooling. For the avoidance of doubt, such costs and expenses shall be payable by Buyer separately from the cost of Products at such time or times as Supplier shall request. (d) Supplier shall notify Buyer in writing within thirty (30) days of its receipt of any request for changed or additional Specifications (i) whether Supplier will honor such changed or additional Specifications, (ii) if Supplier declines to honor such changed or additional Specifications, the basis therefor and (iii) if applicable, the estimated costs and expenses that Buyer will be required to reimburse Supplier in respect of the requested changes or additions, as provided in Subsection (c) above. Buyer shall notify Supplier in writing within fifteen (15) days after receiving notice of any required reimbursement whether Buyer agrees to assume such reimbursement obligation. (e) By its request for any changed or additional Specifications for any Product, Buyer shall be deemed to represent and warrant to Supplier that the manufacture and sale of the Product incorporating Buyer’s changed or additional Specifications, as a result of such incorporation, will not and could not reasonably be expected to (i) violate or conflict with any contract, agreement, arrangement or understanding to which Buyer and/or any of its Affiliates is a party, including this Agreement and any other contract, agreement, arrangement or understanding with Supplier and/or its Affiliates, (ii) infringe on any trademark, service xxxx, copyright, patent, trade secret or other intellectual property rights of any Person, or (iii) violate any Applicable Law. Buyer shall indemnify and hold Supplier and its Affiliates harmless (including with respect to reasonable attorneys’ fees and disbursements) from any breach of this representation and warranty.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!