Safety and Security Certification Plan Elements Sample Clauses

Safety and Security Certification Plan Elements. The Contractor is responsible for safety and security certification activities associated with its Work. The Contractor shall develop and comply with a Safety and Security Certification Plan that describes in detail how the Contractor shall identify, mitigate, verify/validate, and certify safety and security requirements. The Safety and Security Certification Plan shall include the following:  Organizational structure identifying personnel responsible for safety and security certification activities.  Qualifications of safety and security personnel. Personnel must have adequate experience in either railroad system safety or security or both and be able to demonstrate proficiency in hazard management, systems safety and security hazard analysis, verification, validation, and self-certification, processes as supported by their resumes.  A method for demonstrating that that the Work is designed and constructed in conformance with the system-level Preliminary Hazard Analysis Reports, Site-Specific Hazard Analysis Reports, and CHSTP Safety and Security Management Plan (Book 3).  Regular updates to and expansion of the Certifiable Elements and Hazards Log. Hazards associated with each certifiable element that can reasonably be expected to occur in the CHSTP shall be identified on the Certifiable Elements and Hazards Log.  Hazard and vulnerability mitigations are identified as output from site-specific hazard analyses, and are input to the Verification and Validation Process for the creation of Certifiable Items Lists.  Management of the verification and validation of safety and security requirements, in conformance with the Contractor’s verification and validation plan.  Completion of the Safety and Security Certification Package in compliance with the requirements of the CHSTP Safety and Security Management Plan and the CHSTP Verification and Validation Management Plan. A Safety and Security Certification Package shall be compiled by the Contractor when all Certifiable Items Lists for a particular element or infrastructure component are completed for applicable milestone payments. The Safety and Security Certification Package shall consist of a signed Certificate of Conformance for the Project element, all completed Certifiable Items Lists, a completed Certifiable Elements and Hazards Log, and all supporting documentation such as hazard analysis, drawings, and design element descriptions.  Outreach to safety and security stakeholders including emergency...
AutoNDA by SimpleDocs

Related to Safety and Security Certification Plan Elements

  • Safety and Security Contractor is responsible for maintaining safety in the performance of this Agreement. Contractor shall be responsible to ascertain from the District the rules and regulations pertaining to safety, security, and driving on school grounds, particularly when children are present.

  • Safety and Security Procedures Contractor shall maintain and enforce, at the Contractor Work Locations, industry-standard safety and physical security policies and procedures. While at each Court Work Location, Contractor shall comply with the safety and security policies and procedures in effect at such Court Work Location.

  • Health, Safety and Security 14.1 The Employer recognizes a responsibility to provide an environment intended to protect the health, safety and security of Members as they carry out their responsibilities. To that end, the Employer agrees: (a) to maintain a Joint Health and Safety Committee (the JHSC) with broad representation drawn from all sectors of the University, including at least one (1) person appointed by the Association; (b) to cooperate with the Association in making every reasonable provision for the safety, health and security of Members; (c) to take reasonable measures to maintain the security of the buildings and grounds while at the same time maintaining reasonable access for Members who have a need for such access at times other than during regular working hours; (d) to ensure that the Association has the right to appoint at least one (1) person to any representative committee whose terms of reference specifically include the health, safety or security of Members as they carry out their responsibilities; (e) to comply with the Occupational Health and Safety Act, R.S.O. 1990, and relevant regulations thereto, as amended from time to time (the “Act”); (f) that Members may refuse unsafe work pursuant to and in accordance with the relevant provisions of the Act for so doing; (g) that Members report any known or potential dangers to their Xxxx; (h) In addition, the Employer agrees: i) to provide Members with health and safety training, personal protective equipment, and access to health and safety programs, policies and procedures; ii) to provide resources for the JHSC; iii) to compensate a CASBU Member who is eligible to be, and serves as, the person appointed by the Association to the JHSC when that service is outside the period of the Member’s contract; iv) to provide training for the person appointed by the Association to the JHSC directly related to their duties and responsibilities in connection with the JHSC; v) to recognize a JHSC Member’s right to be present during workplace safety testing and audits and receive written copies of any reports and recommendations from the testing/audits and a copy of a draft report if one is provided to the Employer; vi) to recognize a JHSC Member’s right to have advance notice when advance notice is given by the Ministry of Labour of any Ministry of Labour inspection and to accompany a Ministry of Labour Inspector during an inspection and receive a copy of any report produced by the inspector. 14.2 The parties agree that all personal communications must adhere to the Personal Harassment and Discrimination Policy and the Nipissing University Acceptable Use Policy. Effective June 10, 2006, universities are subject to the Freedom of Information and Protection of Privacy Act (FIPPA). All records in the custody and control of the University will be subject to FIPPA with exceptions as defined by the Act. Persons may request and have a right to access University information or records. A record is defined under the Act as any record of information however recorded, whether in printed or electronic form, film, or otherwise and includes drafts, post-it notes, margin notes, hard drive files, emails, voice mails, electronic agendas, address books, and recording devices. 14.3 Unless required under FIPPA, and for the purposes of this Article, files are documents under a Member’s control and stored on University property, either in paper or electronic form. Such files do not include the Member’s official file in the Xxxx’x office nor the Personnel File of the Member in the Human Resources office. 14.4 On termination of a Member’s employment for any reason other than cause, the Employer will permit, by appointment only, accompanied access for a period of fifteen (15) working days (or longer with the agreement of the Xxxx) by the former Member or the Member’s executors to the Member’s files, whether in paper or electronic format. The purpose of the allowed access is for transferring required documents to other faculty, the Chair, or the Xxxx. Where files are not required to support continued student academic needs or ongoing operational requirements, the former Member or designate may remove or destroy their personal files. Items that are clearly of a personal nature or are owned by the former Member such as furniture, pictures, books, etc., may be removed at this time.

  • Electronic and Information Resources Accessibility and Security Standards a. Applicability: The following Electronic and Information Resources (“EIR”) requirements apply to the Contract because the Grantee performs services that include EIR that the System Agency's employees are required or permitted to access or members of the public are required or permitted to access. This Section does not apply to incidental uses of EIR in the performance of the Agreement, unless the Parties agree that the EIR will become property of the State of Texas or will be used by HHSC’s clients or recipients after completion of the Agreement. Nothing in this section is intended to prescribe the use of particular designs or technologies or to prevent the use of alternative technologies, provided they result in substantially equivalent or greater access to and use of a Product.

  • Certification of Compliance with the Energy Policy and Conservation Act When appropriate and to the extent consistent with the law, Vendor certifies that it will comply with the Energy Policy and Conservation Act (42 U.S.C. 6321 et seq; 49 C.F.R. Part 18) and any mandatory standards and policies relating to energy efficiency which are contained in applicable state energy conservation plans issued in compliance with the Act. Does Vendor agree? Yes

  • CERTIFICATION REGARDING USE OF CONTRACT FUNDS FOR LOBBYING This provision is applicable to all Federal-aid construction contracts and to all related subcontracts which exceed $100,000 (49 CFR 20). 1. The prospective participant certifies, by signing and submitting this bid or proposal, to the best of his or her knowledge and belief, that: a. No Federal appropriated funds have been paid or will be paid, by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any Federal agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with the awarding of any Federal contract, the making of any Federal grant, the making of any Federal loan, the entering into of any cooperative agreement, and the extension, continuation, renewal, amendment, or modification of any Federal contract, grant, loan, or cooperative agreement. b. If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any Federal agency, a Member of Congress, an officer or employee of Congress, or an employee of a Member of Congress in connection with this Federal contract, grant, loan, or cooperative agreement, the undersigned shall complete and submit Standard Form-LLL, "Disclosure Form to Report Lobbying," in accordance with its instructions. 2. This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Submission of this certification is a prerequisite for making or entering into this transaction imposed by 31 U.S.C. 1352. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure. 3. The prospective participant also agrees by submitting its bid or proposal that the participant shall require that the language of this certification be included in all lower tier subcontracts, which exceed $100,000 and that all such recipients shall certify and disclose accordingly. This provision is applicable to all Federal-aid projects funded under the Appalachian Regional Development Act of 1965. 1. During the performance of this contract, the contractor undertaking to do work which is, or reasonably may be, done as on-site work, shall give preference to qualified persons who regularly reside in the labor area as designated by the DOL wherein the contract work is situated, or the subregion, or the Appalachian counties of the State wherein the contract work is situated, except: a. To the extent that qualified persons regularly residing in the area are not available. b. For the reasonable needs of the contractor to employ supervisory or specially experienced personnel necessary to assure an efficient execution of the contract work. c. For the obligation of the contractor to offer employment to present or former employees as the result of a lawful collective bargaining contract, provided that the number of nonresident persons employed under this subparagraph (1c) shall not exceed 20 percent of the total number of employees employed by the contractor on the contract work, except as provided in subparagraph (4) below. 2. The contractor shall place a job order with the State Employment Service indicating (a) the classifications of the laborers, mechanics and other employees required to perform the contract work, (b) the number of employees required in each classification, (c) the date on which the participant estimates such employees will be required, and (d) any other pertinent information required by the State Employment Service to complete the job order form. The job order may be placed with the State Employment Service in writing or by telephone. If during the course of the contract work, the information submitted by the contractor in the original job order is substantially modified, the participant shall promptly notify the State Employment Service. 3. The contractor shall give full consideration to all qualified job applicants referred to him by the State Employment Service. The contractor is not required to grant employment to any job applicants who, in his opinion, are not qualified to perform the classification of work required. 4. If, within one week following the placing of a job order by the contractor with the State Employment Service, the State Employment Service is unable to refer any qualified job applicants to the contractor, or less than the number requested, the State Employment Service will forward a certificate to the contractor indicating the unavailability of applicants. Such certificate shall be made a part of the contractor's permanent project records. Upon receipt of this certificate, the contractor may employ persons who do not normally reside in the labor area to fill positions covered by the certificate, notwithstanding the provisions of subparagraph (1c) above. 5. The provisions of 23 CFR 633.207(e) allow the contracting agency to provide a contractual preference for the use of mineral resource materials native to the Appalachian region. 6. The contractor shall include the provisions of Sections 1 through 4 of this Attachment A in every subcontract for work which is, or reasonably may be, done as on-site work.

  • Contractor Certification Regarding Ethics The Contractor certifies that the Contractor is now, and shall remain, in compliance with Chapter 42.52 RCW, Ethics in Public Service, throughout the term of this Contract.

  • Data Security Requirements Without limiting Contractor’s obligation of confidentiality as further described in this Contract, Contractor must establish, maintain, and enforce a data privacy program and an information and cyber security program, including safety, physical, and technical security and resiliency policies and procedures, that comply with the requirements set forth in this Contract and, to the extent such programs are consistent with and not less protective than the requirements set forth in this Contract and are at least equal to applicable best industry practices and standards (NIST 800-53).

  • Warranty Affirmations Assurances and Certifications 12 5.1 WARRANTY 12 5.2 General Affirmations 12 5.3 Federal Assurances 12 5.4 Federal Certifications 12 5.5 State Assurances 12 ARTICLE VI. Intellectual Property 13

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!