Safety Processes & Requirements Sample Clauses

Safety Processes & Requirements. All work associated with the construction and maintenance of any and all equipment above the Communication Space must be performed by a qualified electrical worker, adhere to all pertinent OSHA rules and regulations, and be performed at the sole expense of the Licensee. A site safety plan must be approved by a District representative. A pre-work tailboard meeting must occur with a District representative from the Operations or Safety Departments before personnel approaches and passes through the Communication Worker Safety Zone. The District may elect to have an inspector on site while work is performed at the sole and exclusive expense of the Licensee. All entry of personnel and materials into and through the Communication Worker Safety Zone must be clearly announced and acknowledged over the District’s radio network. Work completion and the clearance of the Communication Worker Safety Zone must also be announced and acknowledged over the District’s radio network. The upstream overcurrent electrical device (e.g. recloser, breaker) may be set to Hot Line Tag while work is being performed on site. Any and all safety-related system operations will be performed at the sole expense of the Licensee. Licensee must install and maintain signage made of a non-corrosive and durable material, suitable for outdoor use and resistant to ultraviolet radiation that indicates the name of the equipment owner and operator; 24- hour emergency contact information; potential for RF exposure including horizontal and vertical distance from the antenna at which it is safe to work continuously; a unique identified for the site; and emergency shut off details. All signage must be approved by the District’s Joint Use Administrator and meet all applicable ANSI and FCC standards. Licensee must install and maintain a clearly marked load-break (UL- listed) disconnect switch located on the communication pedestal or at a location on the Pole that is operable from the ground to de-energize the Pole Top Wireless antenna/RF emitter (operational and backup power) without notification and at the District’s discretion, during situations where District personnel will be working on or around the Pole. The switch must be readily accessible and capable of being locked in either the open or closed position and include a standard District double hasp with lock from the Licensee (allowing operation of switch by either party). The disconnect switch blades, jaws, and air-gap between them shall all be cle...
Sample 1
AutoNDA by SimpleDocs

Related to Safety Processes & Requirements

  • Specific Order Processes and Requirements 1. Distributor will order Software from SAP using and filling out completely such forms and minimum order requirements as SAP may prescribe from time to time and must comply with any then-current order process for the specific Software product. Where applicable, Distributor agrees to use the electronic means provided by SAP for placing orders.

  • Safety Requirements 18.1.1 The Concessionaire shall comply with the provisions of this Agreement, Applicable Laws and Applicable Permits and conform to Good Industry Practice for securing the safety of the Users. In particular, the Concessionaire shall develop, implement and administer a surveillance and safety program for providing a safe environment on or about the Project, and shall comply with the safety requirements set forth in Schedule-L (the “Safety Requirements”).

  • Subcontract Requirements As required by Section 6.22(e)(5) of the Administrative Code, Contractor shall insert in every subcontract or other arrangement, which it may make for the performance of Covered Services under this Agreement, a provision that said subcontractor shall pay to all persons performing labor in connection with Covered Services under said subcontract or other arrangement not less than the highest general prevailing rate of wages as fixed and determined by the Board of Supervisors for such labor or services.

  • Project Requirements Failure to comply with the following requirements will result in a suspension of all other operations:

  • Operational Requirements 4 At-Sea Monitors are deployed, in accordance with coverage rates developed by 5 NMFS and as assigned through the Pre-Trip Notification System (PTNS), to 6 vessels. Due to availability of funding, changes in the fishery management, 7 such as emergency closures, court ordered closures, weather, and unforeseen 8 events must remain flexible. Additional funding for sea days may be added to 9 the contract within the scope and maximum allowable sea days. 10 The following items define the operational services to be provided by the 11 contractor under this contract.

  • License Requirements The Hotel’s alcoholic beverage license requires that the Hotel shall: (i) request proper identification (photo ID) of any person of questionable age and refuse alcoholic beverage service if the person is either under age or proper identification cannot be produced, and (ii) refuse alcoholic beverage service to any person who, in the Hotel’s judgment, appears to be intoxicated; and (iii) instruct its personnel to avoid encouraging patrons to consume alcoholic beverages (commonly referred to as “over-pouring”).

  • Technology Requirements The Customer is required to obtain and maintain, at the Customer’s own expense, compatible Electronic Channels, hardware, operating systems, and software approved for such use by Royal Bank, and which are up-to-date and unaltered from manufacturer specifications. Royal Bank is not responsible for, and makes no representations or warranties of any nature, with respect to any such Electronic Channels, hardware, operating systems, and software provided by any other Person. Royal Bank has the right, in its sole discretion, without notice, to make changes to this Service from time to time which may result in the Customer’s Electronic Channels, hardware, operating systems, and software no longer being compatible with this Service, and in such event, Royal Bank will have no responsibility or liability to the Customer or any other Person.

  • Personnel Requirements a. The CONTRACTOR shall secure, at the CONTRACTOR'S own expense, all personnel required to perform this Contract.

  • Match Requirements There is no match required on the part of the Grantee under this Agreement.

  • Technical Requirements for SCPs/Databases 10.5.3.1 BellSouth shall provide physical access to SCPs through the SS7 network and protocols with TCAP as the application layer protocol.

Time is Money Join Law Insider Premium to draft better contracts faster.