SANITARY & PLUMBING Sample Clauses

SANITARY & PLUMBING. Standard Toilet would be provided with C.P. Shower, one EWC white commode (Parryware or other similar brand) with P.V.C. cistern (Reliance Co.). All taps & C.P. fittings of Essco or similar brand (base model). There would be concealed line and geyser line in bathrooms. There would be one basin in common toilet (18''x12'') Parryware or other similar brand) in each flat.
Sample 1Sample 2Sample 3See All (23)
AutoNDA by SimpleDocs
SANITARY & PLUMBING. The entire sanitary and plumbing work will be concealed after careful testing to ensure trouble-free performance. All fittings and fixtures will be of standard ISI mark.
Sample 1Sample 2Sample 3See All (4)
SANITARY & PLUMBING. All supply lines inside the flat will be concealed with CPVC Pipes, fittings. UPVC Pipe will be used for outer water lines. Outside soil, waste and rainwater line will be of PVC Pipe. 1 No. basin will be fitted at the dining area. Septic tank will be constructed as per requirement.
Sample 1Sample 2
SANITARY & PLUMBING. Standard Toilet would be provided with C.P. Shower, two commodes (Parryware or similar brand) and in W. C. there would be only one tap. (All taps & C.P. fittings of Parryware or similar brand (base model). There would be concealed line and geyser line in all bathrooms. There would be two basins (18”x12”) Parryware/Essco or similar brand in each flat.
Sample 1
SANITARY & PLUMBING. Standard Toilet would be provided with C.P. Shower, Commodes (Parryware or similar brand) with P.V.C. cistern (Reliance Co.). And in W. C. there would be only one tap. (All taps & C.P. fittings of Essco or similar brand. (base model). There Xxxxxxx Xxxxx Digitally signed by Xxxxxxx Xxxxx DN: c=IN, o=Personal, title=2669, pseudonym=c4cd8acd3336629badd8cf621ce7f6 5c7fe436cbb0fd77ba494c3a10d8730261, postalCode=700064, st=West Bengal, serialNumber=1481d4821cec7a7e7c59a4d85fca2 20e387f79115c0249cdcaf74fa656015f36, cn=Xxxxxxx Xxxxx would be concealed line and geyser line in all bathrooms. There would be two basins (18”x12”) Parryware or similar brand in each flat.
Sample 1
SANITARY & PLUMBING. 3.3.1 At scope of core and at additional points on every floor drains will be installed for Nachshon fan units. 3.3.2 Piping for water supply will be galvanized Sch 40 or plastic piping. 3.3.3 On the first floor 2 toilets for the disabled will be installed. 3.3.4 Fire hydrant system: water sprinkler system in all areas of the floors (the purchaser must adapt the exits to the interior design at his own expense). 2 inch hydrants on each floor with Shtorz connection, 20 m reel, two flexible 2 inch hoses, each 15 m. in length, and a multi-purpose hose, all according to the plan approved by the fire service.
Sample 1
SANITARY & PLUMBING i) Concealed water pipeline. ii) Hindware Ordinary fitting i.e. Commode, Basin, A-1 type pan will be provided. iii) Steel Sink in Kitchen. iv) Low height PVC white cistern will be provided. v) Reputed Brand C.P Fitting in Toilets & Bathroom.
Sample 1
AutoNDA by SimpleDocs
SANITARY & PLUMBING. Common Toilet would be of matching size shower, two bib-cock and would be fitted with one Indian TypePan (White standard quality) with low P.V.C. Cistern (White) Allinside plumbing line are G.I. Non-Tata, Outside P.V.C. (Jaiswal /Oriplast) and W.C. with one Indian Type white commode of Low P.V.C (White) cistern two bib-cocks, one standard size white basin in dining bathroom as desired by the Owners, two bib-cocks in the kitchen
Sample 1

Related to SANITARY & PLUMBING

  • Sanitary Sewer Provide a standard bubble map, as part of the plans, showing locations of numbered points, and a table with point number, northing and easting coordinates, description, and BL station for each point, for the following: ▪ all possible control as established or attained during preliminary survey, including but not limited to – section corners, property irons, intersection center-center irons, other set monuments ▪ benchmarks, including TBM set with preliminary survey ▪ center of manholes ▪ end of manhole stubs (when longer than five feet)

  • Plumbing fixtures and appliances shall be used only for the purposes for which designed, and no sweepings, rubbish, rags or other unsuitable material shall be thrown or deposited therein. Damage resulting to any such fixtures or appliances from misuse by a tenant or its agents, employees or invitees, shall be paid by such tenant.

  • Sanitary Facilities Construction (a) Closets shall be soundly constructed and roofed with weatherproof material. The floor of each closet shall be well drained and constructed of concrete, bricks and cement, or of other approved materials which shall be impervious to water. Every closet shall be well lighted by natural or artificial light and shall be ventilated. Each closet shall have a hinged door, capable of being fastened on the inside, lift seats/flaps and toilet paper. (b) If closets are of single unit construction (only to be used for the formwork process), not contained within a purpose built ablution block, privacy walls which shield the closet/s from outside view shall be installed. (Privacy walls are not required for purpose built ablution blocks eg ATCO huts). (c) Where practicable, toilets to be connected to sewerage before commencement of the job. (d) Closet/urinal location to be conveniently accessible to Employees, but not so close as to cause a nuisance to those persons. (e) Where necessary, portable water seal toilets of an approved standard are to be provided and regularly serviced. (f) Conveniently accessible closets and urinals are to be distributed every 5th floor on multi storey constructions. (g) Closets and urinals are to be washed daily with disinfectant and kept in clean, hygienic condition. (h) Adequate washing facilities, suitably drained, and wash basins/troughs are to be supplied with hot and cold running water. (i) Soap and towels are to be supplied.

  • Heating The Hirer shall ensure that no unauthorised heating appliances shall be used on the premises when open to the public without the consent of the management committee. Portable Liquefied Propane Gas (LPG) heating appliances shall not be used.

  • Drainage ▪ Prevent silt bearing road surface and ditch runoff from delivering sediment to any streams or wetlands. ▪ Maintain rolling dips and drivable waterbars as needed to keep them functioning as intended. ▪ Maintain headwalls to the road shoulder level with material that will resist erosion. ▪ Maintain energy dissipaters at culvert outlets with non-erodible material or rock. ▪ Keep ditches, culverts, and other drainage structures clear of obstructions and functioning as intended. ▪ Inspect and clean culverts at least monthly, with additional inspections during storms and periods of high runoff. This shall be done even during periods of inactivity. ▪ Perform preventative maintenance work to safeguard against storm damage, such as blading to ensure correct runoff, ditch and culvert cleaning, and waterbar maintenance.

  • Electrical Provide drawings for the following systems: .1 Lighting including circuiting and luminaire identification and switching. Also provide illuminance computer printout for all indoor typical indoor spaces and parking lots. .2 Convenience outlets and circuiting, special outlets and circuiting, television outlets, and power systems and equipment. Provide riser diagrams for all electrical systems including master clock, intercom, fire alarm, ITV, computer networking/telephone. Also, provide for emergency and normal power distribution. Provide luminaire schedule. .3 Panel schedule may be in preliminary form but circuitry must be included. .4 Applicable installation details. .5 General legend and list of abbreviations. .6 Voltage drop computation for all main feeders. .7 Short circuit analysis .8 Provide 1/2" scale floor plan and wall elevations for all electrical rooms.

  • Sanitary and Phytosanitary Measures 1. The rights and obligations of the Parties in respect of sanitary and phytosanitary measures shall be governed by the WTO Agreement on the Application of Sanitary and Phytosanitary Measures. 2. The Parties shall exchange names and addresses of contact points with sanitary and phytosanitary expertise in order to facilitate communication and the exchange of information.

  • Drainage Systems (1) Clear culvert inlets, outlets, and sediment catching basins. (2) Maintain waterbars, drainage dips, and other water diversion measures. (3) During active use, patrol and maintain functional drainage. (4) Repair damaged culvert ends.

  • Lighting A system of fixtures providing or controlling the light sources used on or near the airport or within the airport buildings. The field lighting includes all luminous signals, markers, floodlights, and illuminating devices used on or near the airport or to aid in the operation of aircraft landing at, taking off from, or taxiing on the airport surface.

  • HVAC Heating, ventilating and air conditioning.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!