Security Design and Telecommunications/Data Design Consultant Sample Clauses

Security Design and Telecommunications/Data Design Consultant. The Architect shall provide following Security Design and Telecommunications/Data Design Consultant services. The Architect is authorized to engage the services of Consulting Engineering Services, Inc., 000 Xxxxxx Xxxxxx, Xxxxxxxxxx, XX 00000 for the services set forth in this subsection. Security Design and Telecommunications/Data Design Consultant services include, but not limited to: • Provide layout and design of the Main MDF room and satellite IDF rooms, include grounding systems, cable trays racks and punch down blocks. • Provide specifications for data two and four post data racks. • Provide layout and design and specify wired and wireless data jacks and associated pathways and wiring from each data drop to the punch down blocks in the IT closets. • Provide layout and design and specify for analog fax lines for fax machines, elevator, fire alarm system and building management systems (BMS). DocuSign Envelope ID: 0CC2C365-CC83-4B1B-9931-9C2231385FE4 • Provide layout and design and specify conduit from MDF room to service pole, identify services entering the building. • Provide layout and design and specify the wired VOIP phone system, specify jacks and wiring from the telephone xxxx back to the punch down blocks. • Provide, layout, design and specify the Public Address/Paging and GPS wireless clock systems, include panic buttons and interface with first responder’s alerts and security systems. • Provide layout and design Patch Cords and appurtenances. • Provide layout and design and specify infrastructure for campus provided emergency Blue Light Phones as required. • Provide layout and design an internet-based security system. • Provide layout and design for intrusion detection including door contacts, glass break sensors, motion sensors and keypads in the security system. • Provide layout and design access control including card readers, access cards and/or fobs, request to exit sensors, door buzzers. • Provide layout and design for Closed-circuit Television (CCTV) surveillance system including, but not limited to: o Cameras o Servers o UPS and multiple video monitors. o Dedicated punch down blocks in IDF/MDF rooms. • Provide layout and design for intrusion detection, video surveillance and access control systems, specify one integrated seamless system. • Provide design, drawings and specifications that is in accordance with DAS standards. • Review submittals and attend meetings as necessary. • Perform inspections of installed work during constructi...
Sample 1
AutoNDA by SimpleDocs

Related to Security Design and Telecommunications/Data Design Consultant

  • Contractor Project Manager The Contractor Project Manager shall serve, from the Effective Date, as the Contractor project manager and primary Contractor representative under this Agreement. The Contractor Project Manager shall (i) have overall responsibility for managing and coordinating the performance of Contractor’s obligations under this Agreement, including the performance of all Subcontractors; and (ii) be authorized to act for and bind Contractor and Subcontractors in connection with all aspects of this Agreement. The Contractor Project Manager shall respond promptly and fully to all inquiries from the JBE Project Manager.

  • Network Interconnection Architecture Each Party will plan, design, construct and maintain the facilities within their respective systems as are necessary and proper for the provision of traffic covered by this Agreement. These facilities include but are not limited to, a sufficient number of trunks to the point of interconnection with the tandem company, and sufficient interoffice and interexchange facilities and trunks between its own central offices to adequately handle traffic between all central offices within the service areas at P.01 grade of service or better. The provisioning and engineering of such services and facilities will comply with generally accepted industry methods and practices, and will observe the rules and regulations of the lawfully established tariffs applicable to the services provided.

  • Schematic Design Phase Services § 3.2.1 The Architect shall review the program and other information furnished by the Owner, and shall review laws, codes, and regulations applicable to the Architect’s services.

  • Design Services The Engineer shall perform services during the schematic design phase, the design development phase, the contract documents phase, and the bidding period as hereinafter specified.

  • Design and Non-Design 109.20.3.1 Trip Charge - Premises Visit Charge No USOC $95.00

  • Interconnection Customer Provided Services The services provided by Interconnection Customer under this LGIA are set forth in Article 9.6 and Article 13.5.1. Interconnection Customer shall be paid for such services in accordance with Article 11.6.

  • Telemedicine Services This plan covers clinically appropriate telemedicine services when the service is provided via remote access through an on-line service or other interactive audio and video telecommunications system in accordance with R.I. General Law § 27-81-1. Clinically appropriate telemedicine services may be obtained from a network provider, and from our designated telemedicine service provider. When you seek telemedicine services from our designated telemedicine service provider, the amount you pay is listed in the Summary of Medical Benefits. When you receive a covered healthcare service from a network provider via remote access, the amount you pay depends on the covered healthcare service you receive, as indicated in the Summary of Medical Benefits. For information about telemedicine services, our designated telemedicine service provider, and how to access telemedicine services, please visit our website or contact our Customer Service Department.

  • Design Professional to Design Work The Design Professional Contract requires the Design Professional to design and to prepare the Contract Documents, a copy of which shall be furnished to the Contractor upon request. The Design Professional Contract requires the Design Professional to designate a readily accessible representative (either on Site or by computer, phone or fax or otherwise) who shall have authority promptly to render decisions and to furnish information required of the Design Professional.

  • Technology Access A. Contractor expressly acknowledges that state funds may not be expended in connection with the purchase of an automated information system unless that system meets certain statutory requirements relating to accessibility by persons with visual impairments. Accordingly, Contractor represents and warrants to System Agency that the technology provided to System Agency for purchase (if applicable under this Contract or any related Solicitation) is capable, either by virtue of features included within the technology or because it is readily adaptable by use with other technology, of:

  • AIN Selective Carrier Routing for Operator Services, Directory Assistance and Repair Centers 4.3.1 BellSouth will provide AIN Selective Carrier Routing at the request of <<customer_name>>. AIN Selective Carrier Routing will provide <<customer_name>> with the capability of routing operator calls, 0+ and 0- and 0+ NPA (LNPA) 555-1212 directory assistance, 1+411 directory assistance and 611 repair center calls to pre-selected destinations.

Time is Money Join Law Insider Premium to draft better contracts faster.