Working Conditions Fair Practices and Benefits
Working Conditions Fair Practices and Benefits Sample Clauses
Related to Working Conditions Fair Practices and Benefits
PRESENT CONDITIONS AND BENEFITS All rights, benefits and working conditions which employees now enjoy, receive or possess as employees of the Employer shall continue to be enjoyed and possessed insofar as they are consistent with this Agreement but may be modified by mutual agreement between the Employer and the Union.
GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
SAFETY CONDITIONS OF EMPLOYMENT A. The District and its employees shall be safety conscious in their conduct and actions and shall cooperate in the implementation of the District's safety program. B. Employees shall report any unsafe or unhealthy conditions directly to their supervisor. The District shall conduct investigations of employee reports and take appropriate measures as soon as possible. The employee shall be informed by the principal or designee of the results of the investigation and of whatever action is to be taken. Safety violations will be corrected within ten (10) working days whenever possible. C. Teachers shall not be required to work under unsafe conditions or to perform tasks which endanger their health and safety. D. First aid supplies and first aid treatment shall be available to employees at each school site. A first aid kit shall be provided for each District vehicle used to transport pupils and shall be taken on all field trips. E. Personal protection equipment required by an employee's job duties shall be available from the principal or designee at each school site. F. An employee shall immediately report any assaults in connection with his/her employment to the principal or immediate supervisor who shall report the incident to the appropriate law enforcement agency and the District Office. 1. An employee may exercise the same degree of physical control over a pupil that a parent would be legally privileged to exercise, but which in no event shall exceed the amount of physical control reasonably necessary to maintain order, protect property, or protect the health and safety of pupils. 2. An employee shall receive applicable insurance and leave benefits for any injury incurred under the provisions of this Paragraph. 3. Employees shall be reimbursed for damage to personal property resulting from assault under the provisions of this Paragraph. 4. When the continued presence of a pupil in a class represents a physical danger to a teacher, the teacher may request that the principal institute suspension procedures in accordance with District policy. 5. The District's "Student Discipline Policy" shall be made available to employees.
Unsafe Working Conditions Employees shall be recognized by the Employer to have the competence to determine what constitutes unsafe working conditions within their discipline. No employee shall be disciplined for refusal to work in a situation which is deemed unsafe beyond the reasonable requirements of the employee's job.
Safe Working Conditions The Employer undertakes to maintain office furniture, equipment, etc., in a practical and safe condition in order to avoid injury to employees or damage to their attire. Employees, for their part and in their own interest, are expected to advise the Employer of any such potentially injurious equipment.
WORKING CONDITIONS 9.01 Lunch periods shall be at mid-shift. 9.02 The Employer shall allow each employee two (2) breaks of ten (10) minutes each, but not more in a work shift. Time of breaks shall be mutually agreed upon. 9.03 Essential protective clothing including welder’s gloves, protective vests or leather jackets, noise abatement devices, and rainwear shall be supplied at no charge to the employee. In the event that an employee does not return the foregoing items supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any money owing to the employee. 9.04 Chemical or flush toilets shall be provided from the commencement of work on all jobs. Where the sewer or chemical toilets are not available, sanitary toilet facilities shall be provided as called for in local sanitary regulations. Toilet houses shall be painted, at least on the inside, and cleaned out daily. Toilet paper will be provided. 9.05 Where there is no running tap water available, drinking water in approved sanitary containers shall be provided. Paper cups will be supplied. Salt tablets shall be supplied during the summer months. 9.06 If requested by the Union or employee, the Employer will provide within three (3) calendar days, a termination slip which shall state the reason for the employee’s termination and whether or not he is eligible for rehire. 9.07 Adequate time will be allowed prior to quitting time for picking up tools. 9.08 A lock-up shall be provided for employees for drying clothes, and dressing room, as well as lunch room. The lock-up shall have tables, and benches with provision for drying clothes. Such lock-up shall have windows and venting with adequate lighting and provision for continuous heat twenty-four (24) hours a day. The Employer shall be responsible for having the lock-up cleaned out daily and kept cleared of building material and other construction paraphernalia. Additional shelters shall be provided for employees to eat their lunch as may be required. 9.09 In case of fire or burglary on property or premises provided by the Employer, the Employer shall protect the value of an employee’s work clothes up to a total of three hundred and fifty dollars ($350.00). The Employer shall also provide fire and burglary insurance for the employees required tools to a total value of the tools, tool for tool, make for make, provided an inventory of tools and clothing is filed with the Employer. The Employer shall supply the required forms and obtain the inventory from each employee. The employee shall receive a signed copy of the inventory from the Employer. Coverage will commence at the date of the filing of the inventory with the Employer. Where an employee fails to file an inventory his rights to submit a claim shall be waived. (a) All mechanics, welders, servicemen, tire servicemen, drill doctors, steel sharpeners, bodymen painters, and mechanics and welder apprentices who request coveralls shall have these supplied and cleaned by the Employer. There shall be one change a week available in the employee’s proper size. Employees are expected to take reasonable care of coveralls supplied. In the event that an employee does not return the coveralls supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any monies owing to the employee. When requested, coveralls shall be supplied on a temporary basis to employees who assist on work as described above, or where the Employer and the Union mutually agree that coveralls are required. (b) Employees entitled to receive coveralls as provided herein may obtain an additional change of coveralls in any one week providing the condition of the coveralls requires a change. The shop xxxxxxx shall use discretion in authorizing the additional change. (c) All shops shall provide adequate clean-up facilities. 9.11 The Employer shall pay the cost of obtaining operators’ licences other than those required under the Motor Vehicles Act for employees covered by this Agreement. 9.12 No employee will be permitted to use his own motor vehicle in a manner which is unfair to other members or against the best interest of the Union. 9.13 Each employee being terminated will be given one (1) hour’s notice of termination by the Employer or one (1) hour’s pay allowed in lieu thereof. Heavy duty mechanics and apprentice mechanics may utilize this hour to gather together their tools and put them in shape for their next job. 9.14 When a mechanic leaves the employ of the Employer, the Employer shall be required to pay cost of shipping mechanic’s tools. Tools shall be shipped within forty-eight (48) hours of his leaving his employment, subject to the same conditions as govern transportation. When an Operating Engineer elects to transport his own tools to and from the jobsite, the employee shall be paid the rate of two dollars and seventy-five cents ($2.75) per one hundred (100) pounds per one hundred (100) miles. (e.g. $2.75 x 528 pounds x 273 miles = $39.64). Where the Employer fails to comply with the above, the employee shall be deemed to be still on the payroll of the Employer and shall receive his usual wages and all other conditions of this Agreement until there is compliance with these provisions. 9.15 Where an employee is involved in an accident while on the job and as a result is unable to perform his work, he shall receive a full day’s pay for the day of the accident.
Employment Conditions In accepting the option, you acknowledge that: (a) Any notice period mandated under any applicable laws shall not be treated as service for the purpose of determining the vesting of the option; and your right to receive shares of Common Stock in settlement of the option after termination as an employee, if any, will be measured by the date of your termination as an employee and will not be extended by any notice period mandated under the applicable law. Subject to the foregoing and the provisions of the Plan, the Company, in its sole discretion, shall determine whether your status as an employee or other service-provider has terminated and the effective date of such termination. (b) The vesting of the option shall cease upon, and no portion of the option shall become vested following, your termination as an employee or other service-provider for any reason except as may be explicitly provided by the Plan or this Stock Option Agreement. Unless otherwise provided in the Plan or this Stock Option Agreement, the unvested portion of the option at the time of your termination as an employee or other service-provider will be forfeited. (c) The Plan is established voluntarily by the Company. It is discretionary in nature and it may be modified, amended, suspended or terminated by the Company at any time, subject to Section 8.6.5 of the Plan. (d) The grant of the option is voluntary and occasional and does not create any contractual or other right to receive future grants of options, or benefits in lieu of options, even if options have been granted repeatedly in the past. (e) All decisions with respect to future option grants, if any, will be at the sole discretion of the Company. (f) You are voluntarily participating in the Plan. (g) The option is an extraordinary item that does not constitute compensation of any kind for service rendered to the Company (or any Subsidiary), and which is outside the scope of your employment contract, if any. In addition, the option is not part of normal or expected compensation or salary for any purpose, including, but not limited to, calculating any severance, resignation, termination, redundancy, end-of-service payments, bonuses, long-service awards, pension or retirement benefits or similar payments. (h) The future value of the underlying shares of Common Stock is unknown and cannot be predicted with certainty. If you obtain shares upon settlement of the option, the value of those shares may increase or decrease. (i) No claim or entitlement to compensation or damages arises from termination of the option or diminution in value of the option or shares of Common Stock acquired upon settlement of the option resulting from your termination of employment or service (for any reason whether or not in breach of the local law) and you irrevocably release the Company and each Subsidiary from any such claim that may arise. If, notwithstanding the foregoing, any such claim is found by a court of competent jurisdiction to have arisen then, by signing this Stock Option Agreement, you shall be deemed irrevocably to have waived your entitlement to pursue such a claim.
Proof of Compliance with Disability Benefits Coverage Requirements In order to provide proof of compliance with the requirements of the Workers’ Compensation Law pertaining to disability benefits, a Vendor/Contractor shall: a) Be legally exempt from obtaining disability benefits coverage; or b) Obtain such coverage from an insurance carrier; or c) Be a Board-approved self-insured employer. A Vendor seeking to enter into a Contract with the State of New York shall provide one of the following forms to OGS at the time of Vendor Submission and thereafter, within three (3) days of request: a) Form CE-200, Certificate of Attestation for New York Entities With No Employees and Certain Out of State Entities, That New York State Workers’ Compensation and/or Disability Benefits Insurance Coverage is Not Required, which is available on the Workers’ Compensation Board’s website (xxx.xxx.xx.xxx); (Reference applicable Solicitation and Group #s on the form.); b) Form DB-120.1, Certificate of Disability Benefits Insurance. The Vendor/Contractor must request that its insurance carrier send this form to OGS; or c) Form DB-155, Certificate of Disability Benefits Self-Insurance. The Vendor/Contractor must call the Board’s Self-Insurance Office at 000-000-0000 to obtain this form. Proof of coverage or an exemption shall be submitted to The New York State Office of General Services, New York State Procurement, Corning Tower- 00xx Xxxxx, Xxxxxx Xxxxx Xxxxx, Xxxxxx, XX 00000.
PAY, HOURS AND BENEFITS A. WAGES
Conditions of Employment It is a term and condition of employment and of the obligations and rights occurring under this Agreement, that an employee: i) properly use and maintain all appropriate protective clothing and tools and equipment supplied by the Company for specified circumstances; and ii) use any technology and perform any duties which are within the limits of the employee's skill, competence and training: and iii) Understand that termination of employment will be based on job requirements and skills and that the principle of "last on - first off' will not apply. It is the needs and requirements of the Company, together with the efforts, skills and abilities of the employee which will be the determining factors regarding the retrenchment of employees. However, where efforts, skills and abilities are equal then seniority shall take precedence; and iv) maintain commitment to, and comply with the Company's directions (consistent with the objectives of the Agreement) with respect to, safety, quality, site cleanliness and waste management; and v) provide and maintain an adequate kit of tools in accordance with Parent Award requirements; and vi) be committed to the objectives in Clause 4 of this Agreement All new employees (other than casuals) will be engaged on the basis of a 3-month probationary period, which shall count as service. The Company reserves the right to terminate a probationary employee at any time during this 3 month period subject to a week's notice or payment in lieu thereof. The Company's right to employ persons on a specified task and/or specified period basis is acknowledged.
