Requirements for plant protection definition

Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include deliveries required to maintain plant production.
Sample 1Sample 2Sample 3
Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include Deliveries required to maintain plant production. The Company shall reasonably work with individual customers to identify their Requirements for Plant Protection, including accepting customers’ individual assessment and representation of how much consumption is needed to achieve Plant Protection when all other uses are curtailed. The Requirements for Plant Protection may be reviewed and/or adjusted two (2) times during a calendar year.(Continued on Sheet No. C-9.00) Issued September 13, 2022 by Effective for service rendered onGarrick J. Rochow, and after October 1, 2022President and Chief Executive Officer,Jackson, Michigan Issued under authority of theMichigan Public Service Commission dated July 7, 2022M.P.S.C. No. 3 - Gas First Revised Sheet No. C-9.00Consumers Energy Company Cancels Original Sheet No. C-9.00 (To Revise Rule C3. Curtailment of Gas Service) (Continued From Sheet No. C-8.00) C3. CURTAILMENT OF GAS SERVICE (Contd)C3.1 Definitions (Contd)
Sample 1Sample 2Sample 3
Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include Deliveries required to maintain plant production.M.P.S.C. No. 3 - Gas First Revised Sheet No. C-9.00Consumers Energy Company Cancels Original Sheet No. C-9.00 (To Revise Rule C3. Curtailment of Gas Service) (Continued From Sheet No. C-8.00) C3. CURTAILMENT OF GAS SERVICE (Contd)C3.1 Definitions (Contd)
Sample 1Sample 2Sample 3

Examples of Requirements for plant protection in a sentence

  • Requirements for plant protection shall mean such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel.

  • Requirements for plant protection shall mean such minimum volumes of gas required to prevent physical harm to the plant facilities or danger to plant personnel when such protections cannot be afforded through the use of alternate fuel.

  • Research naturally operates in a way that achieves survival of the fittest: researchers who do not do good work will fail to achieve peer-reviewed publications and not land a permanent academic post; in subjects reliant on grant income they will not get funding.


More Definitions of Requirements for plant protection

Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include Deliveries required to maintain plant production. The Company shall reasonably work with individual customers to identify their Requirements for Plant Protection, including accepting customers’ individual assessment and representation of how much consumption is needed to achieve Plant Protection when all other uses are curtailed. The Requirements for Plant Protection may be reviewed and/or adjusted two (2) times during a calendar year M.P.S.C. No. 3 - GasConsumers Energy Company Sheet No. C-11.00 (Continued From Sheet No. C-10.00) C3. CURTAILMENT OF GAS SERVICE (Contd)C3.2 Curtailment of Gas Service for Gas Supply Deficiency (Contd)D. Base Period
Sample 1Sample 2
Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include Deliveries required to maintain plant production. Issued December 13, 2019 by Patti Poppe,President and Chief Executive Officer, Jackson, MichiganMichigan Public Service Effective for service rendered onCommissionand after November 15, 2019January 6, 2020 Filed DBRIssued under authority of the Michigan Public Service Commission(Continued on Sheet No. C-9.00) (Continued From Sheet No. C-8.00) C3. CURTAILMENT OF GAS SERVICE (Contd)C3.1 Definitions (Contd)
Sample 1Sample 2
Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection
Sample 1
Requirements for plant protection means such minimum volumes of gas as required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include deliveries required to maintain plant production. (Continued From Sheet No. C-8.00) C3. CURTAILMENT OF GAS SERVICE (Contd)C3.1 Definitions (Contd)
Sample 1

Related to Requirements for plant protection

  • Plant Protection Gas means the minimum volumes required to prevent physical harm to the plant facilities or danger to plant personnel when such protection cannot be afforded through the use of an alternate fuel. This includes the protection of such material in process as would otherwise be destroyed, but shall not include deliveries required to maintain plant production. A determination will be made by the Seller of minimum volumes required. Such essential volumes will be dispatched accordingly.

  • Cathodic protection means a technique designed to prevent the corrosion of a metal surface by making that surface the cathode of an electrochemical cell. For example, protection can be accomplished with an impressed current system or a galvanic anode system.

  • Cathodic protection tester means a person who can demonstrate an understanding of the principles and measurements of all common types of cathodic protection systems as applied to buried or submerged metal piping and tank systems. At a minimum, such persons must have education and experience in soil resistivity, stray current, structure-to-soil potential, and component electrical isolation measurements of buried metal piping and tank systems.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, and ordinances concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, as such requirements are enacted and in effect on or prior to the Closing Date.

  • Community protection zone means the area within eight

  • Fire Protection means all aspects of fire safety including but not limited to fire prevention, firefighting or Fire Suppression, pre-fire planning, fire investigation, public education and information, training or other staff development;

  • Health and Safety means, in relation to a recipient or a third person, the prevention of death or serious personal injury;

  • Clean air standards, as used in this clause means:

  • Standard Methods for the Examination of Water and Wastewater means the most recent edition of Standard Methods for the Examination of Water and Wastewater published jointly by the American Public Health Association, the American Waterworks Association and the Water Environment Federation;

  • Environmental and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances and similar provisions having the force or effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety and pollution or protection of the environment, including all such standards of conduct and bases of obligations relating to the presence, use, production, generation, handling, transport, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or by-products, asbestos, polychlorinated biphenyls (or PCBs), noise or radiation.

  • Imminent danger to the health and safety of the public means the existence of any condition or practice, or any violation of a permit or other requirement of this article, in a surface coal mining and reclamation operation which could reasonably be expected to cause substantial physical harm to persons outside the permit area before such condition, practice, or violation can be abated. A reasonable expectation of death or serious injury before abatement exists if a rational person, subjected to the same conditions, or practices giving rise to the peril, would not expose himself to the danger during the time necessary for abatement.

  • Health and Safety Laws means all applicable laws, statutes, regulations, subordinate legislation, bye-laws, common law and other national, international, federal, European Union, state and local laws, judgments, decisions and injunctions of any court or tribunal, and codes of practice and/or guidance notes issued by any applicable government body or authority, public body, trade union, works council, or industry or regional sector authority to the extent that they relate to or apply to the health and safety of any person, including (but not limited to) any such requirements and obligations concerning Covid-19.

  • Spatial Planning and Land Use Management Act means the Spatial Planning and Land Use Management Act, 2013 (Act 16 of 2013);

  • Water pollution means the unpermitted release of sediment from disturbed areas, solid waste or waste-derived constituents, or leachate to the waters of the state.

  • Environmental Policy means to conserve energy, water, wood, paper and other resources, reduce waste and phase out the use of ozone depleting substances and minimise the release of greenhouse gases, volatile organic compounds and other substances damaging to health and the environment, including any written environmental policy of the Customer;

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • MFN Protection has the meaning set forth in Section 2.14(e)(iii).

  • Environmental pollution means the contaminating or rendering unclean or impure the air, land or waters of the state, or making the same injurious to public health, harmful for commer- cial or recreational use, or deleterious to fish, bird, animal or plant life.

  • Safety Requirements means Prudent Electrical Practices, CPUC General Order No. 167, Contractor Safety Program Requirements, and all applicable requirements of Law, PG&E, the Utility Distribution Company, the Transmission Provider, Governmental Approvals, the CAISO, CARB, NERC and WECC.

  • Occupational Safety and Health Law means any Legal Requirement designed to provide safe and healthful working conditions and to reduce occupational safety and health hazards, including the Occupational Safety and Health Act, and any program, whether governmental or private (such as those promulgated or sponsored by industry associations and insurance companies), designed to provide safe and healthful working conditions.

  • Procurement Code means §13-1-101, et seq., XXXX 0000, as amended and supplemented from time to time.

  • Air pollution means the presence in the outdoor atmosphere of one or more air contaminants in sufficient quantities, and of such characteristics and duration as is, or is likely to be, injurious to human health, plant or animal life, or property, or which unreasonably interferes with enjoyment of life and property. For the purposes of this chapter, air pollution shall not include air contaminants emitted in compliance with chapter 17.21 RCW, the Washington Pesticide Application Act, which regulates the application and control of the use of various pesticides.

  • Environmental, Health and Safety Laws means the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act of 1976, and the Occupational Safety and Health Act of 1970, each as amended, together with all other laws (including rules, regulations, codes, plans, injunctions, judgments, orders, decrees, rulings, and charges thereunder) of federal, state, local, and foreign governments (and all agencies thereof) concerning pollution or protection of the environment, public health and safety, or employee health and safety, including laws relating to emissions, discharges, releases, or threatened releases of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes into ambient air, surface water, ground water, or lands or otherwise relating to the manufacture, processing, distribution, use, treatment, storage, disposal, transport, or handling of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes.