System test definition

System test means a test of tank system components, including any associated delivery piping, secondary containment or spill control component, to identify releases of regulated substances.
Sample 1Sample 2Sample 3
System test means a test of tank system components, including any associated delivery piping, secondary containment, or spill control component, to identify releases of regulated substances. Specifically, for underground tanks, underground piping, spill prevention equipment and containment sumps, owners and operators must conduct tests according to the requirements for tank tightness testing (2-3-4-2(c)), line tightness testing (2-3-4-3(a)(2)(i)), and spill prevention equipment and containment sumps (2-3-5(a))."Temporary closure" means a period of time that a storage tank is empty but is not permanently closed or has not changed service to store a non- regulated substance. This term does not apply when a tank system is emptied for repair.
Sample 1Sample 2Sample 3
System test means a test conducted on assets, with that asset connected to thegrid, to assess the interaction of that asset with the grid;
Sample 1Sample 2

Examples of System test in a sentence

  • System test may be witnessed by Owner, Architect, or Consulting Engineer by reporting intent to do so to the factory.

  • System test software enables operators to initiate a test of the entire system or of a particular portion of the system.

  • Students are required to pass the Massachusetts Comprehensive Assessment System test, MCAS, in English Language Arts, Mathematics and Science in order to receive a high school diploma.

  • International students must demonstrate English Language proficiency on the Test of English as a Foreign Language or the International English Language Testing System test (IELTS), prior to admission.

  • S., Jard, C., Le Traon, Y., Jéron, T., Jézéquel, J.M., Le Guennec, A.: System test synthesis from UML models of distributed software.

  • For each building envelope, perform two pressure tests; the Architectural Only test and the Architectural Plus HVAC System test.

  • The instantaneous sum of the impact forces with respect to time shall not exceed 7,5 kN and the bending moment on the test impactor shall not exceed 510 Nm. The Upper Legform to Frontal Protection System test shall be carried out if the lower frontal protection system height at the test position is more than 500 mm.

  • ADES will use the Contractor’s RSA System test scripts and may modify the test instructions and expected results slightly to provide additional test coverage.

  • Owners and/or operators of storage tanks who are eligible for cleanup under the Corrective Action Account shall immediately investigate and confirm all suspected releases of regulated substances requiring reporting under Section 19 within seven (7) days of detection as follows: (a) System test.

  • System test and live data should be separated and adequately protected.


More Definitions of System test

System test means a test carried out by a connected person, or by the Transmission Licensee which involves simulating conditions or the controlled application of irregular, unusual or extreme conditions on their system or any part of the transmission system, and any commissioning and acceptance tests of generating unit, HVDC facility, plant and apparatus;
Sample 1Sample 2
System test means shall mean any of the System tests conducted by County or Contractor, as applicable, under Exhibit A (Statement of Work), including, but not limited to, User Acceptance Test, Volume Test and Data Migration Test.
Sample 1
System test means the integrated testing of the System with the Modification(s) developed pursuant to a Work Order using the Acceptance Test Documents. Completion of System Test shall be deemed completion of the Services. Test Matrix means the detailed definition of test cases and the number and type of test cycles to be used during System Test.
Sample 1
System test means an Acceptance Test for an Additional System Component or Customization to confirm that each and every System Component operates properly in accordance with all Specifications and all provisions of this Agreement with no Priority Level 1, 2 or 3 Deficiencies, which may be required to be conducted in accordance with the applicable Statement of Work for such Additional System Component or Customization.
Sample 1
System test means a test of tank system components, including any associated delivery piping, secondary containment, or spill control component, to identify releases of regulated substances. Specifically, for underground tanks, underground piping, spill prevention equipment and containment sumps, owners and operators must conduct tests according to the requirements for tank tightness testing (2-3-4-2(c)), line tightness testing (2-3-4-3(a)(2)(i)), and spill prevention equipment and containment sumps (2-3-5(a)).means a test of tank system components, including any associated delivery piping, secondary containment or spill control component, to identify releases of regulated substances.
Sample 1
System test has the meaning set forth in Section 5.3.
Sample 1

Related to System test

  • COVID-19 test means a viral test for SARS-CoV-2 that is:

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Drug test means a test designed to detect the illegal use of a controlled substance.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • EPP test Means one EPP command sent to a particular “IP address” for one of the EPP servers. Query and transform commands, with the exception of “create”, shall be about existing objects in the Registry System. The response shall include appropriate data from the Registry System. The possible results to an EPP test are: a number in milliseconds corresponding to the “EPP command RTT” or undefined/unanswered.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Start-Up Testing means the completion of applicable required factory and start-up tests as set forth in Exhibit C.

  • S&P CDO Monitor Test A test that will be satisfied on any date of determination (following receipt, at any time on or after the S&P CDO Monitor Election Date, by the Issuer and the Collateral Administrator of the Class Break-even Default Rates for each S&P CDO Monitor input file (in accordance with the definition of “Class Break-even Default Rate”)) if, after giving effect to a proposed sale or purchase of an additional Collateral Obligation, the Class Default Differential of the Highest Ranking Class of the Proposed Portfolio is positive. The S&P CDO Monitor Test will be considered to be improved if the Class Default Differential of the Proposed Portfolio that is not positive is greater than the corresponding Class Default Differential of the Current Portfolio.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Fit test means the use of a protocol to qualitatively or quantitatively evaluate the fit of a respirator on an individual.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Cannabis testing facility means an entity registered by

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Testing service means a national testing service selected by the board.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.