205 UPM/Producer Sample Clauses

205 UPM/Producer. Employer shall make pension and health contributions on behalf of any Unit Production Manager who is also employed as a producer based on the salary paid for Unit Production Manager services, but in no event shall contributions be made on an amount less than the total salary paid for all services on the Picture, or $100,000, whichever is less. In the event the salary for Unit Production Manager services only exceeds $100,000, Employer shall pay contributions on the actual Unit Production Manager salary. This provision shall not apply to a Unit Production Manager who is also a “Principal” of the Employer, as defined below. If a Director is a “Principal” of the Employer as defined below, then the Director’s salary for purposes of pension and health contributions shall be the lesser of 2% of the Budget of the Picture or the Director’s actual salary. If a Unit Production Manager or Assistant Director is a "Principal" of the Employer as defined below, then any such Unit Production Manager’s or Assistant Director’s compensation for the purposes of pension and health contributions will be based on the lesser of the actual salary or the applicable salary level at Level 2, as defined herein. For example, if a Unit Production Manager on a Level 1b film is paid an amount that exceeds the Level 2 salary for a Unit Production Manager, the contributions shall be paid on an amount equivalent to the Level 2 Unit Production Manager salary. A Principal is defined as an individual who owns, or whose spouse, parent, sibling or lineal descendent owns, directly or indirectly, ten percent (10%) or more of the equity of the Employer (the “Principal”).
Sample 1Sample 2See All (7)
AutoNDA by SimpleDocs
205 UPM/Producer. Employer shall make pension and health contributions on behalf of any Unit Production Manager who is also employed as a producer on a theatrical motion picture based on the salary paid for Unit Production Manager services, but in no event shall contributions be made on an amount less than $100,000 for the picture. However, the foregoing shall not apply to a producer/Unit Production Manager who is employed solely for the purpose of preparing budgets and/or storyboards; in that case, pension and health contributions shall be based on the total salary paid for such services.
Sample 1Sample 2Sample 3See All (5)
205 UPM/Producer. Employer shall make pension and health contributions on behalf of any Unit Production Manager who is also employed as a producer based on the salary paid for Unit Production Manager services, but in no event shall contributions be made on an amount less than the total salary paid for all services on the Picture, or $100,000, whichever is less. In the event the salary for Unit Production Manager services only exceeds $100,000, Employer shall pay contributions on the actual Unit Production Manager salary.
Sample 1Sample 2See All (4)
205 UPM/Producer. Employer shall make pension and health contributions on behalf of any Unit Production Manager who is also employed as a producer based on the salary paid for Unit Production Manager services, but in no event shall contributions be made on an amount less than the total salary paid for all services on the Picture, or $100,000, whichever is less. In the event the salary for Unit Production Manager services only exceeds $100,000, Employer shall pay contributions on the actual Unit Production Manager salary. This provision shall not apply to a Unit Production Manager who is also a “Principal” of the Employer, as defined below. If a Director is a “Principal” of the Employer as defined below, then the Director’s salary for purposes of pension and health contributions shall be the lesser of 2% of the Budget of the Picture or the Director’s actual salary. If a Unit Production Manager or Assistant Director is a "Principal" of the Employer as defined below, then any such Unit Production Manager’s or Assistant Director’s compensation for the purposes of pension and health contributions will be based on the lesser of the actual salary or the applicable salary level at Level 3, as defined herein. For example, if a Unit Production Manager on a Level 2 film is paid an amount that exceeds the Level 3 salary for a Unit Production Manager, the contributions shall be paid on an amount equivalent to the Level 3 Unit Production Manager salary. A Principal is defined as an individual who owns, or whose spouse, parent, sibling or lineal descendent owns, directly or indirectly, ten percent (10%) or more of the equity of the Employer (the “Principal”). I. Article 13-Minimum Salary Schedules and Working Conditions of UPMs and Assistant Directors, except as modified herein: Assistant Directors and Unit Production Managers shall be paid initial salary no less than fifty percent (50%) of the minimum weekly salaries in Paragraph 13-101(a) of the BA. Daily salaries shall be computed at one-fourth (1/4) the weekly rate. The salary for distant location shall be the same as the studio rate. A sixth or seventh day worked in a workweek shall be paid at straight time (i.e. one-fifth (1/5) of the weekly rate if a weekly Employee). The production fee for Unit Production Managers, First Assistant Directors, and Key Second Assistant Directors shall be $25.00 per week for either a 5-day or 6-day workweek; the daily production fee is $6 if employed on a daily basis. There shall be no Vacation Pay (4...
Sample 1

Related to 205 UPM/Producer

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

  • Programming Phase Schematic Design Phase: 2.2.1.3. Design Development Phase:

  • Compressed Work Week The Company and Union recognize the concept of the compressed work week. It is further understood that the compressed work week conditions will apply only to those departments that are on the compressed work week.

  • Originating Switched Access Detail Usage Data A category 1101XX record as defined in the EMI Telcordia Practice BR-010-200- 010.

  • MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

  • Licensed Products Lessee will obtain no title to Licensed Products which will at all times remain the property of the owner of the Licensed Products. A license from the owner may be required and it is Lessee's responsibility to obtain any required license before the use of the Licensed Products. Lessee agrees to treat the Licensed Products as confidential information of the owner, to observe all copyright restrictions, and not to reproduce or sell the Licensed Products.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Traffic Measurement and Billing over Interconnection Trunks 6.1 For billing purposes, each Party shall pass Calling Party Number (CPN) information on at least ninety-five percent (95%) of calls carried over the Interconnection Trunks. 6.1.1 As used in this Section 6, “Traffic Rate” means the applicable Reciprocal Compensation Traffic rate, Measured Internet Traffic rate, intrastate Switched Exchange Access Service rate, interstate Switched Exchange Access Service rate, or intrastate/interstate Tandem Transit Traffic rate, as provided in the Pricing Attachment, an applicable Tariff, or, for Measured Internet Traffic, the FCC Internet Order. 6.1.2 If the originating Party passes CPN on ninety-five percent (95%) or more of its calls, the receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. For any remaining (up to 5%) calls without CPN information, the receiving Party shall xxxx the originating Party for such traffic at the Traffic Rate applicable to each relevant minute of traffic, in direct proportion to the minutes of use of calls passed with CPN information. 6.1.3 If the originating Party passes CPN on less than ninety-five percent (95%) of its calls and the originating Party chooses to combine Reciprocal Compensation Traffic and Toll Traffic on the same trunk group, the receiving Party shall xxxx the higher of its interstate Switched Exchange Access Service rates or its intrastate Switched Exchange Access Services rates for all traffic that is passed without CPN, unless the Parties agree that other rates should apply to such traffic. 6.2 At such time as a receiving Party has the capability, on an automated basis, to use such CPN to classify traffic delivered over Interconnection Trunks by the other Party by Traffic Rate type (e.g., Reciprocal Compensation Traffic/Measured Internet Traffic, intrastate Switched Exchange Access Service, interstate Switched Exchange Access Service, or intrastate/interstate Tandem Transit Traffic), such receiving Party shall xxxx the originating Party the Traffic Rate applicable to each relevant minute of traffic for which CPN is passed. If the receiving Party lacks the capability, on an automated basis, to use CPN information on an automated basis to classify traffic delivered by the other Party by Traffic Rate type, the originating Party will supply Traffic Factor 1 and Traffic Factor

  • SINGLE-USE PRODUCTS The Board of County Commissioners has established a single-use products and plastic bags policy intended to reduce the use of products which have become globally recognized as having lasting negative impacts on the environment. Neither single-use products nor plastic bags may be sold or disbursed on County property by staff or contracted vendors, except as set forth in Orange County Administrative Regulation 9.01.03. Failure to comply with the Regulation may result in termination of the contract or other contractual remedies, and may affect future contracting with the County. The use of reusable, recyclable, biodegradable, or compostable materials is encouraged.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!