APPROVAL OF DESIGN DOCUMENTS Sample Clauses

APPROVAL OF DESIGN DOCUMENTS. (a) The plans and specifications for the Initial Improvements (collectively, "Design Documents") shall be subject to the parties' reasonable approval as follows: the parties shall meet regularly during the design phase ("Design Meetings"), at times convenient to all parties, to review the Schematic Design Studies, Design Development Documents and Construction Documents, discuss approaches, alternatives and constraints, and reach design solutions. Tenant shall have a full voice in the decision-making process during the Design Meetings, and its views and requirements shall be taken into account, so that the Design Documents for the Base Building Work will be acceptable to Tenant, subject to the requirements of Sections 2.1(b) and 2.1(c) of this Rider and the understanding that any Tenant requirements that exceed the Base Building Construction Budget or Tenant Allowance shall be at Tenant's sole cost, and any schedule impacts resulting therefrom shall be borne by Tenant. If Tenant elects not to participate in the Design Meetings, it shall be copied on minutes and deliverables and shall be deemed to have waived its approval right with respect thereto, and shall be deemed to have approved all designs, alternatives and decisions made or approved at any such Design Meeting, or in any such deliverables, except if and to the extent that Tenant gives Landlord written notice of its disapproval, together with a reasonably detailed explanation of the reasons therefor and, if feasible, the steps necessary to gain Tenant's approval, within two business days after receipt of such minutes or deliverables. Landlord's views and requirements shall be taken into account by Tenant so that the Design Documents for the Tenant Improvements will be reasonably acceptable to Landlord, subject to the requirements of Section 2.2 of this Rider and the understanding that prior to final approval by Landlord and the City of the Construction Documents for the Tenant Improvements, any Tenant requirements that impact the Base Building Work or exceed the Tenant Allowance shall be at Tenant's sole cost and any schedule impacts resulting from the Tenant Improvements shall be borne by Tenant. (b) Each party shall submit to the other sets of Schematic Design Studies, Design Development Documents and Construction Documents for the Base Building Work or the Tenant Improvements, as the case may be, on or before the applicable dates therefor set forth in the Project Development Schedule. These in-prog...
Sample 1
AutoNDA by SimpleDocs
APPROVAL OF DESIGN DOCUMENTS. 14 5.1 Approval By Company........................................................ 14 5.2 Schedule Of Submittals..................................................... 15
Sample 1

Related to APPROVAL OF DESIGN DOCUMENTS

  • Schematic Design Documents In accordance with the approved Preliminary Design and Construction Schedule and based upon approval of and comments made by the Owner regarding the Concept Design Studies, the Design Professional shall prepare and submit to the Owner Schematic Design Documents, including drawings and outline specifications. These documents shall represent a further development of the approved design concept, providing additional detail and specificity regarding the intended design solution. Typically, all such documents shall be drawn to scale, indicating materials and assemblies, as appropriate, to convey the design intent and to illustrate the Project’s basic elements, scale and relationship to the Site. All major pieces of furniture and equipment to be fixed or supplied by the CM/GC shall be illustrated to scale. (See ASTM Standard Practice E 1804-02, August 2007, Sections 6.3, 8.2 and 8.3 for guidance on information which is generally developed in Schematic Design.)

  • Design Documents Prepare and submit the following documents to the DAS - Records Management Office with a copy of the transmittal letter submitted to the respective Project Manager: 1. City/State Approved Drawings (1) Original set 2. Bid Set Drawings (1) Set BOND PAPER (marked as “ORIGINAL”) (1) Set electronic file (DWG & PDF) 3. Project Manual (1) Set hard copy & Detail Manual (1) Set electronic file

  • Construction Documents The architectural and engineering documents setting forth the design for the Project prepared by the Design Professional. Construction Documents include, but are not limited to, the Specifications, the Drawings, the Supplementary Conditions, the General Conditions, and all Addenda.

  • Construction Documents Phase Bidding or Negotiation Phase:

  • Approval of Plan Approval of the Plan by the Commissioner of Internal Revenue as referred to in 17.1 means a continuing approval sufficient to establish that the Plan and related trust(s) are at all times qualified and exempt from income tax under Section 401(a) and other applicable provisions of the Internal Revenue Code of 1986, and that contributions made by the Company under the Plan are deductible for income tax purposes in accordance with law. The cognizant governmental authorities referred to in 17.1 include, without limitation, the Department of Labor, the Pension Benefit Guaranty Corporation and the Securities and Exchange Commission, and their approval means their confirmation with respect to any matter within their regulatory authority that the Plan does not conflict with applicable law.

  • Approval of Plans and Specifications The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.

  • Approval of Plans Landlord will not check Tenant drawings for building code compliance. Approval of the Final Plans by Landlord is not a representation that the drawings are in compliance with the requirements of governing authorities, and it shall be Tenant’s responsibility to meet and comply with all federal, state, and local code requirements. Approval of the Final Plans does not constitute assumption of responsibility by Landlord or its architect for their accuracy, sufficiency or efficiency, and Tenant shall be solely responsible for such matters.

  • Construction Document Phase 1.4.1 Based on the approved Design Development Documents, Guaranteed Maximum Price, coordinated models and any further adjustments in the scope or quality of the Project or in the Amount Available for the Construction Contract authorized by the Owner, the Architect/Engineer shall prepare, for approval by the Owner and review by the Construction Manager, Construction Documents consisting of Drawings, Schedules and Specifications derived from the model(s) in accordance with Owner’s written requirements setting forth in detail the requirements for construction of the Project, including, without limitation, the BIM Execution Plan and “Facility Design Guidelines”. The Plans, Drawings and Specifications for the entire Project shall be so prepared that same will call for the construction of the building and related facilities, together with its built-in permanent fixtures and equipment which will cost not more than the Guaranteed Maximum Price accepted by Owner, or the Amount Available for the Construction Contract established by Owner if no Guaranteed Maximum Price proposal has been accepted by Owner. The Architect/Engineer will be responsible for managing the design to stay within such Guaranteed Maximum Price proposal or Amount Available for the Construction Contract. The Architect/Engineer shall review the Construction Documents as they are being prepared at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Construction Documents. The Architect/Engineer shall provide the Construction Manager with a compact disc containing documents and data files derived from the model to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.4.2 As a part of Construction Documents Phase, Architect/Engineer shall accomplish model coordination, aggregation and “clash detection” to remove conflicts in design between systems, structures and components. Architect/Engineer shall demonstrate and provide written assurance to Owner that all conflicts/collisions between models have been resolved. 1.4.3 The Architect/Engineer shall consult with the Owner and Construction Manager on matters such as construction phasing and scheduling, bid or proposal alternates, liquidated damages, the construction contract time period, and other construction issues appropriate for the Project. The Architect/Engineer shall assist the Owner and Construction Manager in the preparation of the necessary bidding information, bidding forms, RFP information, and RFP forms, and the Conditions of the Contract. 1.4.4 The Architect/Engineer shall assist the Owner in connection with the Owner’s responsibility and procedures for obtaining approval of all building and accessibility authorities having jurisdiction over the Project. 1.4.5 The Architect/Engineer shall provide coordination and inclusion of sequence of operations for all operable systems in the facility as defined by Owner during Design Development. 1.4.6 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.4.7 The Architect/Engineer shall participate in a final review of the Construction Documents and model(s) with the Owner and Construction Manager at the Project location or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Construction Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments. 1.4.8 Before proceeding into the Bidding and Proposal Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Construction Documents and approval of the Final Amount Available for the Construction Contract as approved by the Board of Regents.

  • Approval of Agreement The Board of Directors of the Company has authorized the execution and delivery of this Agreement by the Company and has approved this Agreement and the transactions contemplated hereby.

  • MSAA Indicator Technical Specification Document This Agreement shall be interpreted with reference to the MSAA Indicator Technical Specifications document.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!