Customs Duties and Taxes Sample Clauses

Customs Duties and Taxes. 1. Member States shall specify in their customs laws the point in time of the incurrence of customs duties and taxes and the time limit for the payment of the amount of customs duties and taxes due. 2. Member States shall provide in their customs laws for payment of customs duties and taxes to be made in cash or by any other means with similar discharging effect. 3. Member States shall endeavour to allow deferred payment of customs duties and taxes. Where deferred payment is allowed, the conditions and requirements for the deferred payment shall be specified in the customs laws of the Member State concerned.
Customs Duties and Taxes. (1) Aircraft of the designated airline(s) of either Party engaged in the operation of the agreed services, as well as their regular equipment, spare parts, fuel, oils (including hydraulic fluids), lubricants, aircraft stores (including food, beverages, liquor, tobacco and other products for sale to or use by passengers in limited quantities during the flight) and other items intended for or used solely in connection with the operation or servicing of the aircraft, which are retained on board such aircraft shall be exempt on the basis of reciprocity from all customs duties, inspection fees and other national charges on arrival in and departure from the territory of the other Party. (2) The following shall also be exempt on the basis of reciprocity from all customs duties, inspection fees and other national charges, with the exception of charges based on the actual cost of the service provided: (a) aircraft stores introduced into or supplied in the territory of a Party and taken on board, within reasonable limits, for use on aircraft of a designated airline of the other Party engaged in the operation of the agreed services, even when these stores are to be used on a part of the journey performed over the territory (b) ground equipment and spare parts including engines introduced into the territory of a Party for the servicing, maintenance or repair of aircraft of a designated airline of the other Party used in the operation of the agreed services; and (c) fuel, lubricants and consumable technical supplies introduced into or supplied in the territory of a Party for use in an aircraft of a designated airline of the other Party engaged in the operation of the agreed services, even when these supplies are to be used on a part of the journey performed over the territory of the Party in which they are taken on board. (3) Aircraft stores, equipment and supplies referred to in paragraph (1) of this Article retained on board the aircraft of the designated airline(s) of either Party engaged in the operation of the agreed services may be unloaded in the territory of the other Party with the approval of the customs authorities of that other Party. The aircraft stores, equipment and supplies unloaded, as well as aircraft stores, equipment and supplies introduced into the territory of the other Party referred to in paragraph (2) of this Article, shall be subject to the supervision or control of the said authorities, and if required to fair and reasonable storage charges, ...
Customs Duties and Taxes. All Customs and Excise duties import and/or export duties and all other taxes, tariffs and surcharges of any nature whatsoever now or hereafter levied or imposed in any country or territory either directly of indirectly in respect of the supply shall be borne by the Buyer and except as stated in the Order Acknowledgement Form are additional to the prices therein stated.
Customs Duties and Taxes. Member States shall specify in their customs laws the point in time of the incurrence of customs duties and taxes and the time limit for the payment of the amount of customs duties and taxes due. Member States shall provide in their customs laws for payment of customs duties and taxes to be made in cash or by any other means with similar discharging effect. Member States shall endeavour to allow deferred payment of customs duties and taxes. Where deferred payment is allowed, the conditions and requirements for the deferred payment shall be specified in the customs laws of the Member State concerned.
Customs Duties and Taxes. 1. The Licensee and its sub-contractors, if any, shall pay 0.5 percent duty on all imports into Eritrea of equipment, machinery, vehicles and spare parts (excluding sedan cars and their spare parts) as well as consumable materials necessary for the exploration activities in accordance with the provisions of the Mining Proclamation. 2. It is understood that office equipment and supplies, including computer equipment, software and other high technology equipment and intellectual property are equipment for purposes of Article 38(1) of the Mining Proclamation. The Ministry shall intently assist to ensure that all imports and exports be accomplished expeditiously. 3. Expatriate employees, consultants and contractors of the Licensee, and their families who are required to take up residence in Eritrea shall be entitled to import and export all personal and household effects free and clear of any taxes, duties and charges, the Ministry shall exert its utmost efforts.
Customs Duties and Taxes. The basic price referred to at Art. 6.1 does not include any of the customs duties and taxes levied in the Russian Federation. These shall be determined by the Project Company together with the Client in accordance with Art. 8 "Customs duties and taxes" and added to the basic price. In the event of a change in the Russian regulations with respect to the levying of customs duties and taxes, the Parties shall agree the extent of the change in the investment cots.

Related to Customs Duties and Taxes

  • Duties and Taxes All stamp, documentary, registration or other like duties or Taxes (excluding Excluded Taxes and any Taxes that are the subject of Section 12.1), including Taxes and any penalties, additions, fines, surcharges or interest relating thereto, or any notarial fees which are imposed or chargeable on or in connection with this Agreement or any other Purchase Document or any other document executed pursuant hereto or thereto shall be paid by each of the Sellers, it being understood and agreed that the Administrative Agent and each Purchaser shall be entitled but not obligated to pay any such duties or Taxes (whether or not they are its primary responsibility), and each of the Sellers shall on demand indemnify the Administrative Agent or such Purchaser, as applicable, against those duties or Taxes and against any reasonable costs and expenses so incurred by it in discharging them. Without prejudice to the survival of any other provision hereof, the terms of this Section 12.2 shall survive the termination of this Agreement and payment of all other amounts payable hereunder.

  • Customs Duties (1) Aircraft operated in international air services by the designated airlines of one Contracting Party, their regular equipment, fuel, lubricants, consumable technical supplies, spare parts including engines, and aircraft stores (including but not limited to such items as food, beverages and tobacco) which are on board such aircraft shall be exempted by the other Contracting Party on the basis of reciprocity from all customs duties, excise taxes and similar fees and charges not based on the cost of services provided on arrival, provided such regular equipment and such other items remain on board the aircraft. (2) Regular equipment, fuel, lubricants, consumable technical supplies, spare parts including engines, aircraft stores (including but not limited to such items as food, beverages and tobacco), printed ticket stock, air waybills, any printed material which bears insignia of a designated airline of one Contracting Party and usual publicity material distributed without charge by that designated airline, introduced into the area of the other Contracting Party by or on behalf of that designated airline or taken on board the aircraft operated by that designated airline, shall be exempted by the other Contracting Party on the basis of reciprocity from all customs duties, excise taxes and similar fees and charges not based on the cost of services provided on arrival, even when such regular equipment and such other items are to be used on any part of a journey performed over the area of the other Contracting Party. (3) The regular equipment and the other items referred to in paragraphs (1) and (2) of this Article may be required to be kept under the supervision or control of the customs authorities of the other Contracting Party. (4) The regular equipment and the other items referred to in paragraph (1) of this Article may be unloaded in the area of the other Contracting Party with the approval of the customs authorities of that other Contracting Party. In these circumstances, such regular equipment and such items shall enjoy, on the basis of reciprocity, the exemptions provided for by paragraph (1) of this Article until they are re-exported or otherwise disposed of in accordance with customs regulations. The customs authorities of that other Contracting Party may however require that such regular equipment and such items be placed under their supervision up to such time. (5) The exemptions provided for by this Article shall also be available in situations where a designated airline of one Contracting Party has entered into arrangements with another airline or airlines for the loan or transfer in the area of the other Contracting Party of the regular equipment and the other items referred to in paragraphs (1) and (2) of this Article, provided that that other airline or airlines similarly enjoy such exemptions from that other Contracting Party. (6) Baggage and cargo in direct transit across the area of a Contracting Party shall be exempt from customs duties, excise taxes and similar fees and charges not based on the cost of services provided on arrival.

  • Elimination of Customs Duties 1. Except as otherwise provided for in this Agreement, each Party shall eliminate or reduce its Customs Duties on originating goods designated for such purposes in its Schedule in Annex 1, in accordance with the terms and conditions set out therein. 2. Except as otherwise provided for in this Agreement, neither Party shall increase any Customs Duty on originating goods from the level provided for in its Schedule in Annex 1.

  • TAXES & DUTIES a) The TDS, Raj-VAT, Service Tax etc., if applicable, shall be deducted at source/ paid by RISL as per prevailing rates. b) For goods supplied from outside India, the successful/ selected bidder shall be entirely responsible for all taxes, stamp duties, license fees, and other such levies imposed outside the country. c) For goods supplied from within India, the successful/ selected bidder shall be entirely responsible for all taxes, duties, license fees, etc., incurred until delivery of the contracted Goods to the Purchaser. d) If any tax exemptions, reductions, allowances or privileges may be available to the successful/ selected bidder in India, the Purchaser shall use its best efforts to enable the successful/ selected bidder to benefit from any such tax savings to the maximum allowable extent.

  • Normal Duties (a) Faculty members are accountable for 10 months of the year. The 10 months accountable time includes such activities as teaching, the counselling of students, curriculum/program development, professional development and participation on a variety of educational committees. (b) At least one month before the commencement of any accountable time longer than four consecutive days, and covering activities other than teaching or professional development the faculty member will submit for approval to the appropriate administrator an activity plan for this period. Approval will not be unreasonably withheld. On an annual basis, the faculty member will submit to the appropriate administrator a written report of their accountable time activities.

  • Taxes, duties and government charges 9.1 The Grantee agrees to pay all taxes, duties and government charges imposed or levied in Australia or overseas in connection with the performance of this Agreement, except as provided by this Agreement. 9.2 If Goods and Services Tax (GST) is payable by a supplier on any supply made under this Agreement, the recipient of the supply will pay to the supplier an amount equal to the GST payable on the supply, in addition to and at the same time that the consideration for the supply is to be provided under this Agreement. 9.3 The Parties acknowledge and agree that they each: (a) are registered for GST purposes; (b) have quoted their Australian Business Number to the other; and (c) must notify the other of any changes to the matters covered by this clause. 9.4 The Grantee agrees that the Commonwealth will issue it with a recipient created tax invoice for any taxable supply it makes under this Agreement. 9.5 The Grantee agrees not to issue tax invoices in respect of any taxable supplies. 9.6 If the Grantee is not, or not required to be, registered for GST, then: (a) clauses 9.3(a), 9.4 and 9.5 do not apply; and (b) the Grantee agrees to notify the Commonwealth in writing within 7 days of becoming registered for GST if during the term of the Agreement it becomes, or is required to become, registered for GST.

  • Obligations and Taxes Pay its Indebtedness and other obligations promptly and in accordance with their terms and pay and discharge promptly when due all taxes, assessments and governmental charges or levies imposed upon it or upon its income or profits or in respect of its property, before the same shall become delinquent or in default, as well as all lawful claims for labor, materials and supplies or otherwise which, if unpaid, might give rise to a Lien upon such properties or any part thereof; provided, however, that such payment and discharge shall not be required with respect to any such tax, assessment, charge, levy or claim so long as the validity or amount thereof shall be contested in good faith by appropriate proceedings and the Company shall have set aside on its books adequate reserves with respect thereto.

  • Payment of Taxes, Duties, Etc of the Trust. Upon receipt under the Notes of Additional Tax Sums and upon the written direction of the Administrative Trustees, the Property Trustee shall promptly pay, solely out of monies on deposit pursuant to this Trust Agreement, any Additional Taxes imposed on the Trust by the United States or any other taxing authority.

  • Typical Duties Measures distance points from reference points and marks guidelines on working surface to lay out work. • Determines vertical and horizontal alignment of courses using xxxxx xxx, gauge line (tightly stretched cord) and level. • Spreads soft layer of mortar that serves as base and binder for brick or block using trowel. • Breaks or cut bricks or blocks to size, using power or hand tools. • Shapes stone preparatory to setting, using a chisel hammer and other shaping tools. • Applies mortar to end of brick or block and positions same in mortar bed. • Spreads mortar over stone and foundation with trowel and sets stone in place by hand or with aid of a crane. • Removes excess mortar from face using trowel. • Taps brick or block with trowel to level, align and embed in mortar, allowing for specified thickness of joint. • Aligns stone with plumb line and finishes joints between stone with a pointing trowel. • Fastens brick, block, or terra cotta veneer to face of buildings or structures with appropriate ties embedded in mortar between units or in anchor holes in units. • Grouts, insulates, and places all reinforcing rods, anchors, and flashing in masonry walls. • Lays refractory brick, block, and insulation in place by spreading, dipping, or spraying materials to build furnaces, line boilers or like fire resistant structures. • Finishes mortar between brick and block with pointing tool or trowel. • Points, cleans, caulks and waterproofs masonry. • Cleans excess mortar or grout from surface of stone using sponge, brush, water, or acid. Brick Trowel, Pointing trowel, Brick Hammer, 2’’& 4’’ Levels, Standard Square, Speed Square, Sliding T Bevel, Braided Masonry Line, Line pins & Line Blocks, Standard Tape Measure, Brick Spacing & Modular tapes, Gauge Rod, Tuck Pointers. APPENDIX A CLASSIFICATIONS, WAGES & BENEFITS UNION BASE RATE CREDIT UNION PROVISION (See Note b) PENSION FUND HEALTH & WELFARE APPREN- TICESHIP FUND ANNUITY (See Note b) CARPENTERS (Effective (06/01/2023 – 05/31/2024) Group I $ 36.55 (a) $ 2.40 $ 5.66 $ 8.00 $ 0.78 $ 0.50 Group II $ 36.98 (a) $ 2.40 $ 5.66 $ 8.00 $ 0.78 $ 0.50 Group III $ 37.22 (a) $ 2.40 $ 5.66 $ 8.00 $ 0.78 $ 0.50 General Xxxxxxx: To be negotiated between the GF and the Company but will be at a rate no less than 12% per hour over the Journeyman scale of the classification under his/her supervision.

  • Fas Duties As Administrator, and subject to the supervision and control of the Investment Company’s Board of Trustees/Directors (the “Board”), FAS will provide facilities, equipment, and personnel to perform or cause to be performed the following “Administrative Services” for operation of the business and affairs of the Investment Company and each of its Funds and any additional Administrative Services that FAS shall agree in writing to perform, or cause to be performed, for the Investment Company from time to time: